OMG OlyBond500 PCPreserver, PaceCart Storage Kit, 1 Gallon Bladder Box

OB500LTS-1GAL is a storage fluid (PCPreserver) designed for long-term preservation of PaceCart adhesive dispensing equipment. It helps flush out residual OlyBond500 adhesive from pumps, hoses, and gun assemblies and lubricates internal parts during periods of non-use. The formulation is non-hazardous, very low VOC, and compatible with both Part 1 and Part 2 sides of the PaceCart system.

Key Features

• enables long-term storage of PaceCart equipment without damage
• flushes adhesive residues from pumps, hoses, and gun assemblies
• works with both Part 1 and Part 2 sides of the PaceCart system
• non-hazardous formulation, very low VOC (<1 g/L)
• snap-in-place spout for easy connection

• item number: OB500LTS-1GAL
• volume: 1 gallon (3.78 liters)
• container type: bladder box with snap-in spout for PaceCart connection
• compatibility: works on both Part 1 and Part 2 sides of PaceCart equipment
• VOC level: very low (below 1 g/L)
• weight: about 7 pounds
• appearance: non-hazardous fluid formulated for storage and flushing

• Pressurize the PaceCart system as normal and ensure both Part 1 and Part 2 lines are ready.
• Connect the OB500LTS-1GAL PCPreserver to the PaceCart via the snap-in spout.
• Pump the PCPreserver through pumps, hoses, and gun tip until adhesive residue is cleared into a suitable waste container.
• Leave the PCPreserver container connected while PaceCart is idle for storage to keep components lubricated.
• Prior to using adhesive again, flush system with regular adhesive to displace the preservation fluid.
• Store PCPreserver container in upright position in clean, protected environment.

Q: What is OB500LTS-1GAL used for?
A: It is used to flush and preserve PaceCart adhesive equipment during long-term storage to prevent adhesive buildup and maintain readiness.

Q: Can it be used on both Part 1 and Part 2 sides?
A: Yes. The PCPreserver is compatible with both sides of the PaceCart system.

Q: What is the VOC content of this product?
A: The product is formulated to be very low VOC, below 1 gram per liter.

Q: How much does a 1-gallon PCPreserver weigh?
A: Approximately 7 pounds.

Q: How do you reconnect when returning to use?
A: After storage, flush the system with adhesive to displace the PCPreserver before beginning regular application.