Armadillo 8 - 10 in. Flashing Dispenser

The Armadillo 8–10 in Flashing Dispenser stores flashing coils securely, with a cover that keeps sharp ends beneath for safety. It supports two coil sizes using dual 1" spacer clips and includes a UV-protected bungee cord to prevent the coil from unraveling. A built-in cutting edge on the cover enables straight cuts, and the carrying handle helps stabilize it on uneven surfaces.

Key features:

• Stores flashing coil end safely beneath cover
• Holds two coil sizes via 1" spacer clips
• UV-protected bungee cord secures the coil
• Built-in cutter edge on cover for straight cuts
• Carrying handle helps stabilize on unlevel surfaces

• SKU: 193-CC-ARMADILLO-10
• Coil size range: 8 in to 10 in flashing
• Spacer clips: two 1" spacing clips
• Bungee: 5⁄16" UV-protected bungee cord
• Cutting edge: built into cover
• Carrying feature: integrated handle on top of dispenser

• Place the dispenser on a stable surface near your work area, ensuring the base is level and the built-in handle is upright for stability. 
• Open the cover and position an 8-in or 10-in coil of flashing inside, use the 1″ spacer clips if required to accommodate smaller coil size. 
• Wrap the 5/16″ UV-protected bungee cord (on the unit) around the coil to prevent unwinding while loading and securing the sharp edge under the cover. 
• Feed the flashing through the dispensing slot or opening, lock the cover down, and use the built-in cutting edge to make a clean, straight cut at the length you need. 
• After cutting, advance the roll slightly, re-secure the sharp end beneath the cover to prevent injury and material damage, close the cover, and carry or reposition the dispenser as needed via the built-in handle.

Q: How does this dispenser reduce waste and prevent coil damage?
A: The bungee cord keeps the coil from unwinding and the cover stores the cut edge safe, so you avoid bent or scratched flashing.

Q: Can I use coil sizes other than 8-in or 10-in in this model?
A: Yes — the included 1″ spacer clips allow adjustment for slightly different coil widths within the 8-10 in range.

Q: What maintenance does the unit require on job sites?
A: Wipe off metal shavings from the cutting edge, check the bungee for UV damage, and keep the cover hinge clean for proper closure.

Q: Is the cutting edge suitable for field use on job sites?
A: Yes — the built-in blade is designed for straight cuts of coil flashing in the field, improving safety and speed. 

Q: How should I store the dispenser when not in use to keep it functioning?
A: Keep it in a dry, protected space, secure the coil inside, close the cover, and avoid placing heavy objects on top of it.