Price: $16.50
Item #MAL-GSG6
Write a review!
Description
The Malco GSG6 Magnetic Gutter Screw Guide is an extra-long driver attachment designed to hold and guide 1/4" hex head gutter screws during installation. It fits over the outside edge of the gutter, allowing fasteners to be driven accurately while protecting the gutter finish. The built-in magnetic tip keeps the screw engaged, while the aluminum sleeve stabilizes the screw for straight, controlled starts and consistent seating.
Key Features
- Holds and guides 1/4" hex head gutter screws
- Impact-grade 6" power drive for extended reach
- 4-1/2" anodized aluminum sleeve prevents marring of gutter edge
- Magnetic tip keeps screw engaged during installation
- Stabilizes screws for accurate starts and straight driving
- Works at angles and overhead positions
- Fits standard drills and 1/4" impact drivers
Specifications
Model: GSG6
Type: Magnetic gutter screw guide / driver attachment
Drive Length: 6 in.
Sleeve Length: 4-1/2 in. aluminum guide
Fastener Compatibility: 1/4" hex head screws
Max Screw Length: Up to approx. 2"–3-3/4" depending on use
Shank: 1/4" hex (impact/drill compatible)
Operation: Used with drill or impact driver
FAQs
Q: How does it perform when working at an angle or overhead?
A: It helps keep the screw aligned while starting, which is especially useful when you can’t keep the drill perfectly straight.
Q: Can it be used with longer screws without losing control?
A: Longer screws can still be used, but control depends on how well the screw stays centered in the guide as it starts into the material.
Q: What causes screws to still wobble even when using a guide like this?
A: Wobble is usually caused by mismatched fasteners or not keeping steady pressure while starting the screw into the surface.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
Malco, #C5R Downspout Crimper
5 Blade Crimper - Longer, shallower crimps produced with the C5 result in a tighter fitting, more self supporting, leak-proof connection in sheet metal pipe and duct.
Price: $48.05
Availability: In Stock
Usually ships within 1-2 Business Days
The Malco C5R Downspout Crimper is a 5-blade hand tool designed to downsize the ends of round duct, pipe, and downspout sections to create a tight, interlocking connection. The multi-blade design forms long, shallow double crimps that replicate factory indentations, allowing sections to fit together securely while maintaining shape and alignment. Key Features 5-blade design creates long, shallow double crimps for tight-fitting jointsProduces factory-style indentations for secure,...
Malco GOT Gutter Outlet Punch
Lightweight tool quickly and easily cuts a clean downspout drop hole anywhere along the length of a standard 5 inch (127 mm) aluminum gutter up to .032 inch (.081 mm) thick.
Price: $194.15
Availability: In Stock
Usually ships within 1-2 Business Days
The Malco GOT Gutter Outlet Punch is a ratcheting tool designed to create clean, accurate downspout outlet holes in aluminum gutters. It uses interchangeable punch and die components to cut precise openings for standard downspout sizes, allowing for efficient gutter installation and modification. The ratcheting mechanism enables controlled cutting with minimal effort while maintaining consistent hole quality. Key Features Creates clean outlet holes in aluminum gutters for downspout...
Malco, GOS2 Gutter Outlet Saw, 2-3/4 in.
Safe, Fast, Clean cuts in thin walled and half round gutter
Price: $23.45
Availability: In Stock
Usually ships within 1-2 Business Days
For use with a minimum 1/2-in. (13 mm) cordless or corded electric drill and Malco combination Arbor and High Speed Pilot Drill. Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set at 10 per-inch (per 25.4 mm) will not grab or twist material, even when cutting half round gutter. The Pilot drill bit projects only 11 mm (7/16-in.) out of the shallow 25.4 mm (1-in.) gutter saw...
Malco GND Gutter Nail Driver
Gutter nail driver for installing up to 8D nails over the edge of a gutter.
Price: $24.80
Availability: In Stock
Usually ships within 1-2 Business Days
Use the Malco Gutter Nail Driver with hidden hangers and 8D galvanized nails to hang aluminum or steel gutters. A non-slip ergonomic grip provides multiple positions for grasping tool and working from above or below roof overhang. Durable 2-piece steel construction plus weather resistant zinc and nickel plating assure long service life of this professional quality tool. FEATURES: Ergonomic Grip 2-piece steel Weather Resistant Zinc and Nickel Planting ...