Roof Drains / OlyVents

OMG OlyVents are engineered to prolong the life of the roof system by reducing moisture within the roof system and trapped air pressure within the building. The one-way vent allows trapped air pressure to escape while the two-way breather, combined with the one-way vent, will help reduce moisture. Trapped air pressure and moisture can cause a reduction in thermal protection of the insulation and roof membrane system leading to roof deck damage. Available as either one-way vents or two-way...

For Retrofit Installations Includes a Cast Aluminum Clamping Ring One-piece seamless spun aluminum body, 12” long drain stem, 17 1/2” O.D. extra large drain flange with depressed sump area to facilitate water drainage from the roof surface Engineered to be installed without removing the existing plumbing or fixture The mechanical compression seal can be removed from the stem and can be used on a field cut stem to accommodate an elbow below the roof surface Simple and easy to install from the...

The extra long screwdriver is fitted with a square socket tip (#2 Robertson) for tightening the special recess head screws on the U-Flow compression seals 12 ½” Shaft, includes a loss-prevention bar.

OMG OlyVents are engineered to prolong the life of the roof system by reducing moisture within the roof system and trapped air pressure within the building. The one-way vent allows trapped air pressure to escape while the two-way breather, combined with the one-way vent, will help reduce moisture. Trapped air pressure and moisture can cause a reduction in thermal protection of the insulation and roof membrane system leading to roof deck damage. Available as either one-way vents or two-way...

Designed for existing through-wall/side-wall or scupper drainage pipes, the aluminum and stainless steel drain components provide durability and compatibility with single ply, BUR and modified bitumen roofing systems. A metal clamping assembly creates a compression type termination in both vertical and horizontal wall flashings. The Scupper RetroDrain features the patented RAC Backflow Compression Seal for attachment to PVC or cast iron leader pipes, and a removable drain strainer. Available...

Incorporates the Patented RAC Backflow Compression Seal, Activated at Drain Flange Level (Requires any 7/16" wrench) For Retrofit Installations on TPO, includes a 17 1/2” TPO coated aluminum drain flange for direct hot air welding of membranes, RAC Backflow Compression Seal, and Aluminum Strainer. The 12” long drain stem is designed to bypass the existing drain bowl right to the water leader.

Vortex Breaker Strainer Dome Get A Better Performing Drain! The OMG Vortex Breaker Strainer Dome is designed as a retrofit upgrade option for installed OMG Hercules and Aluminum Classic Drains. The new strainer has a built-in vortex breaker that helps to provide improved flow for better rooftop performance. When upgraded with the Vortex Breaker Strainer Dome, Hercules Drains offer up to 2.5 times greater water flow than the original Hercules Drains without a vortex breaker. Which means that...