* Item does not qualify for free shipping terms *
Write a review!
Lucas #776 Elite™ Flashing Cement is designed as a
super-premium, high-performance flashing cement intended for use on modified bitumen and asphalt roofs. It
is also an excellent cold process inter-ply adhesive for
SBS modified bitumen single-ply membranes. Cold
process adhesives eliminate the need for hazardous
torches and hot asphalt kettles. Also an excellent form
tie cement for use with rubberized asphalt waterproofing
Lucas Elite™ Flashing Cement is the highest quality, most versatile asphalt based roof
cement ever developed. This distinctive product is intended for use by quality driven roofing
professionals who demand that their materials meet the highest performance standards. Its
outstanding adhesion to wet, dry and even underwater surfaces allows application in any
conditions. With wider usable temperature ranges, Lucas Elite™ Flashing Cement applies
easily at seasonal temperature extremes. Meets ASTM D-4586 and 100% adhesion to wet
surfaces when tested according to ASTM D-3409.
Lucas Elite™ is co-polymer modified and exhibits rubber like elastomeric properties. It is
able to accommodate movement that will cause a conventional roof cement to fail.
Reinforced with polyolefin micro-fibers for superior tensile strength and a smooth uniform
surface texture. Improved adhesion to all surfaces, including when wet or underwater, is
guaranteed by hydrophobic surface active additives including Lucas SI-2, a unique low
surface tension adhesion promoter.
*Pricing does not include shipping
*FREE Shipping for orders of 180+ (3 pallets)
Apply with a standard pointed roofer’s trowel, 1/8 to 1/4 inch thick. Surface must be clean
and sound. Embed polyester or other reinforcement for increased strength. On wet surfaces
some pressure may be required to displace the water. When used as an adhesive for SBS
modified bitumen roofing, apply with a 1/8 inch notched trowel. Allow 10 to 15 minutes open
time to allow for some of the solvent to evaporate before laying down the modified bitumen.
Clean up with Lucas #125 Safe Solve™.
Combustible mixture, keep away from heat and open flames. Avoid prolonged contact with
skin or fumes. If irritation occurs seek medical attention. Do not use near heat or open flame.
Keep out of reach of children. Read MSDS prior to use.
Applicable Specification: D-4586 Type I, Class II
Recommended rate of application: 1/8 to 1/4 inch thick
% Solids: 70 min
% Non-volatile: 80 max
Weight per gallon: 8.6 lbs.
Elongation: 200% min
Recovery (nominal): 95% min
Flash Point (TCC): +100° °F (38.7° °C)
Container Sizes: 3 gallon pails, 10 oz. tube
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!