Sheet Metal Folding Brakes & Accesories

The Van Mark 3017 TrimCutter is a jobsite cutting system that rides on your Van Mark brake to deliver straight, repeatable cuts in aluminum and vinyl trim coil. Instead of fighting snips, utility knives, or wavy edges, the TrimCutter glides along the brake’s edge to produce smooth, factory-like cuts that are ready to bend. Built for siding and roofing contractors, it boosts speed, accuracy, and safety while reducing wasted material and rework. Key Features Brake-Mounted Cutting System Attaches...

The Van Mark TM10-S Mark II TrimMaster – Contractor is a 10' 6" professional-grade portable siding brake engineered to be a true jobsite workhorse for remodelers, siding installers, and exterior contractors. With a 14" throat depth and advanced POWERslot™ hinge and Power Lock™ bar technology, it delivers crisp, accurate bends in aluminum trim coil, light gauge steel, and other common siding metals. The cam-locking system, hollow-core extrusions, and durable construction provide strong...

The Van Mark IM1065 Industrial Metal Master 20 EZ is a professional-grade, 10' 6" portable metal brake built for demanding metal roofing, siding, and commercial trim work. With a deep 20" throat and rugged cam-locking design, it handles everything from “W” style valley pans and rake edges to wide hip and ridge caps, HVAC duct, and plenum work right on the jobsite. Lighter yet stronger new castings, a stable EZ stand, and smooth one-hand bending control make it a serious production tool for...

The Van Mark IT10-S Mark IV Industrial TrimMaster is a 10' 6" heavy-duty siding and metal roofing brake built for demanding commercial and industrial jobsites. With its POWERlock™ bar, POWERslot™ hinge, and 14" throat depth, it delivers crisp, consistent bends in aluminum, galvanized and painted steel, copper, zinc, and more. The included Xtreme Stand™ keeps the brake rock-solid while still staying portable, so one installer can set up, operate, and move it as needed. From roof flashings and...

The Van Mark 3015 TrimFormer is a specialty accessory designed to unlock new trim design options right at your brake. By adding ribs, reliefs, and decorative details into aluminum and light-gauge metals, it lets you turn standard trim pieces into more attractive, high-value profiles without adding extra machines or complex setups. Ideal for exterior remodelers and siding pros, the TrimFormer helps you upgrade the look of fascia, window and door trim, and custom flashing while maintaining speed...

The Van Mark USA1 UniStand is a heavy-duty support stand designed specifically for TrimMaster TM10 and IT10 brakes. Built from rugged steel with an adjustable, wide-stance frame, it gives your brake a solid, level base so you’re not relying on wobbly sawhorses or makeshift supports. The UniStand lets you set a comfortable working height, improves stability when bending long pieces of trim coil or metal, and breaks down into manageable sections for easy transport between jobsites—perfect for...

The Van Mark 3025 Optional Crown Molding Dies transform your TrimFormer into a powerful decorative trim tool. Designed to create elegant, crown-style profiles in aluminum and light-gauge metals, these dies let you bring a premium, “finished carpentry” look to exterior metal work—without special machines or off-the-shelf specialty trim. Perfect for fascia, window and door surrounds, frieze boards, and custom accents, the 3025 dies help you deliver high-end curb appeal straight from the jobsite,...

The Van Mark USA1EZ UniStandEZ is a rugged, purpose-built stand engineered to support TrimMaster TM10 and IT10 brakes on the jobsite. Instead of wrestling with sawhorses or unstable homemade setups, this stand gives you a solid, ergonomic platform so you can focus on accurate bends and faster production. Its adjustable legs help dial in a comfortable working height, while the smart, balanced design makes it easier to move your TrimMaster between the truck, shop, and jobsite without...

The Malco MB48A Portable Mini Brake is a field-ready sheet metal brake designed for forming bends in roofing, HVAC, and general fabrication work. Its portable design allows it to be used directly on the jobsite—such as on a workbench or truck tailgate—while still delivering controlled, consistent bends across full 48" panel widths. It can form bends up to 135° in materials like aluminum, copper, and up to 22-gauge galvanized steel. Key Features Produces bends up to 135° in common sheet...

The Van Mark UNL1 UniLeg is a compact, center support leg designed specifically for TrimMaster TM10 and IT10 brakes. Mounted under the middle of the brake, it helps carry the load of long, heavy pieces of trim coil or metal, reducing flex and improving overall stability. Whether you run your TrimMaster on sawhorses, a platform, or a custom bench, the UniLeg adds that crucial third point of contact, helping keep the brake level and bending more accurate over its full 10' 6" length. Tough,...

Optional leg kit for Malco Mini Brake (Item # MAL-MB48A)

The Van Mark USA2EZ UniStandEZ is a rugged, purpose-built stand engineered to support Van Mark Metal Master brakes on the jobsite. Designed for fast setup and takedown, it gives contractors a stable, ergonomic platform for bending coil stock and trim all day long. Adjustable legs help you dial in a comfortable working height, while a balanced, open-frame design makes it easier to move the brake between the truck, shop, and jobsite without wrestling bulky sawhorses or makeshift supports. Key...

The Van Mark USA2 UniStand is a heavy-duty, adjustable stand designed specifically to support Metal Master series brakes on the jobsite. Instead of balancing your brake on sawhorses or improvised supports, the UniStand gives you a solid, level base and a comfortable working height so you can focus on clean, accurate bends. Built from rugged, contractor-grade steel, it’s made to handle everyday loading, unloading, and bending work while staying easy to transport between jobs. Key Features...

The MB48B "Pan Style" Mini-Brake is engineered to fabricate drip pans, register boxes, and complex corners for flashing and fascia directly on the job site. Weighing just under 100 pounds (45 kg), it can be easily carried by two people or quickly separated into anvil and table components for transport by one person. The MB48B can be operated on a workbench, tailgate, or optional legs to produce 135° bends in 22-gauge (0.86 mm) galvanized steel with a maximum width of 48 inches (1.2 m). Its...

Roof panel machine for making the profile for single and double-lock standing seams (seam height 25 mm/1″) Model 0420 Machine frame made of modular aluminum profile systemUpper machine cover: Swing doors, easy to open, with safety switch, frame elements made of transparent, impact‐resistant polycarbonate⇒ clear view during profiling process⇒ easy access for adjustment and serviceMobile, two fixed and two swivel castors with brakes230 V motor with frequency converter for continuously...

Van Mark Steel Leg Kits (3000, 3001, 3002, 3003) turn your portable brake into a stable, stand-alone workstation on the jobsite. Built from rugged steel, these adjustable leg sets are designed to match specific Van Mark brake models and lengths, providing a solid, level base without the need for sawhorses or makeshift supports. Once installed, your brake stands at a comfortable working height, stays put during clamping and bending, and is easier to set up in the same configuration from job to...

The Van Mark UNL2 UniLeg is a heavy-duty center support leg designed to give your TrimMaster brake a more solid, stable feel across its full working length. Installed under the middle of the brake, it adds a crucial third support point that helps reduce sag, flex, and bounce when you’re bending long runs of fascia, drip edge, and custom trim. Whether you’re set up on stands, sawhorses, or a custom bench, the UNL2 helps keep your brake level, your bends more accurate, and your crew more...