S-5 Endcap for X-Gard

Designed exclusively for the X-Gard snow retention system from S-5!, the X-Clip II & X-Clip III are optional components that can be added to your X-Gard 1.0 or X-Gard 2.0 system to further retard the migration of snow down the roof. X-Clip has a special integrated rubber foot to prevent abrasion of the roof panels finish. The X-Gard rests on the back of the NEX 2.0 Pipe and extends down to rest on the flat of the roof panel. X-Clip II is used on roof panels with seam (rib) heights of 1" to...

Designed exclusively for the X-Gard snow retention system from S-5!, the X-Clip II & X-Clip III are optional components that can be added to your X-Gard 1.0 or X-Gard 2.0 system to further retard the migration of snow down the roof. X-Clip has a special integrated rubber foot to prevent abrasion of the roof panels finish. The X-Clip rests on the back of the NEX 2.0 Pipe and extends down to rest on the flat of the roof panel. X-Clip II is used on roof panels with seam (rib) heights of 1"...

When snow accumulations begin to melt, the result can be catastrophic as the blanket of snow avalanches off the roof, dumping tons of snow onto anything in its path, damaging landscape, gutters, adjacent roofs, vehicles, and causing injury or even death to passers-by. X-Gard is the newest snow retention solution from S-5! and can be designed as a one- or two-pipe system spanning up to 48". No other pipe snow retention system on the market has proven stronger than X-Gard. The...

X-Gard brackets are a key component of the X-Gard snow retention system. The X-Gard bracket is mechanically attached to S-5! mini or regular seam clamps which are in turn fastened to the roof panel with patented round-point setscrews, gripping the seam securely without penetration and without damage to the panel s protective finishes. X-Gard brackets are available in two simple designs: X-Gard 1.0 Bracket. For use with a single pipe system, the X-Gard 1.0 bracket requires one (1) S-5! mini or...