Price: $7.85
Item #OATEY-12803
Write a review!
Quantity:
Overview
Oatey Aurora No-Calk Solar Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the piping for solar mounting system is required.
Low profile flashing collar design provides a clean finished appearance.
Solar Flashings are available in Soft Aluminum, Aluminum and Galvanized Bases.
How To Use
Make sure roof is clean and free from any major protrusion.
Before roof covering is installed:
No tar, asphalt-based roof cement or "pitch" should be applied to the collar portion of any metallic
No-Calk flashing or the base or collar portion of any Thermoplastic or Flexible No-Calk flashing.
At the discretion of the installer, silicone sealant can be applied over all exposed nails or staples.
Silicone sealant can also be applied to the underside of the base to increase sealing power to the roof
and is recommended in areas where frequent or heavy precipitation is common.
Place correct size No-Calk flashing over vent stack with angle facing down slope of the roof. Push firmly to base
of stack until flashing lies flat on the roof. Flashing size should be equivalent to pipe diameter size (i.e. 1.5"
flashing for 1.5" pipe, 2" flashing for 2" pipe size, etc...). The Oatey logo printed on the flashing represents the
front or down slope side of the flashing.
Using corrosion resistant nails or staples, secure the top of the flashing (the end closes to the crest of the roof) at
teach corner and along the sides at 4"-6" intervals to secure flashing to the roof. One nail or staple in each bottom
corner is appropriate. The top of the flashing will be covered one-quarter to one-half of the way down with
roofing shingles. The bottom edge of the flashing should overlap the shingles beneath it so it shed, not traps,
water.
Oatey Thermoplastic base flashings are designed to fit roof angles from flat to 45 degrees. Flexible, Galvanized,
Aluminum and Copper Base Flashings are designed to fit roof angles from flat to 38 degrees. Oatey All-Flash
High-Rise Thermoplastic Roof Flashings are designed to fit roof angles from flat to 60 degrees.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
Oatey, #12802 Aurora No-Calk Solar Flashing 1/2 in. -...
For applications where a watertight seal for roof penetrations around the piping for solar mounting system is required
Price: $9.15
Availability: In Stock
Usually ships within 1-2 Business Days
Oatey® Aurora™ No-Calk® Solar Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the piping for solar mounting systems. Self-sealing collar slides over pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. 1/2 in. to 1-1/2 in. Galvanized Roof Flashing28 Gauge 9.5 in. x 12.5 in. galvanized steel baseFor pitch from 0-40°Rated 180°F continuous heat and...
Oatey, #11873 No-Calk All-Flash Color-Flash Roof Flashing...
Matches the color of your roof
Price: $10.45
Availability: In Stock
Usually ships within 1-2 Business Days
Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. Roof flashing slides over DWV pipe for pitch to 40 degreesMade of rust-proof, stamped 29 gauge galvanized steelBlack Painted baseNon-fading sealing collarApproved...
Oatey, #11872 No-Calk All-Flash Color-Flash Roof Flashing...
Matches the color of your roof
Price: $10.45
Availability: In Stock
Usually ships within 1-2 Business Days
Oatey® Color-Flash® All-Flash® No-Calk® Roof Flashings feature a color base designed to match roof color in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. Self-sealing collar slides over pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. 3"-4" Brown Galvanized Roof Flashing28 gauge 12" x 15" galvanized steel baseColor base designed to match roof colorFor...
Oatey, #11840 Galvanized Base Roof Flashing 1.25-1.5 in.
Shingle Flashings are designed to effectively seal round pipe penetrations, Slides over pipe
Price: $7.15
Availability: In Stock
Usually ships within 1-2 Business Days
Oatey®Galvanized No-Calk® Roof Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Patented All-Flash® design allows use on multiple pipe sizes28 gauge Galvanized steel baseRated 180°F continuous heat and approved for Type B...