Portals Plus - Curb Cover w/212 Cap, Tan

Pipe Portal with C-212 Cap

Furnish and install the Portals Plus Pipe Portal System at all points where up to two pipes .375" - 1" in diameter and two pipes 1" - 2" in diameter penetrate the roof. The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation. The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with prepunched holes and molded sealing ring on an 8" collared opening. An EPDM (Ethylene Propylene Diene Monomer) compression molded cap model C-212 shall be utilized. All Caps shall include Portals Plus' stainless steel Snaplock Clamps. Attachment and installation of the Pipe Portal shall be done in accordance with Portals Plus' instructions and the roofing membrane manufacturer's recommendations.

Key Features

• Furnish and install the Portals Plus Pipe Portal System at all points where up to two pipes .375" - 1" in diameter and two pipes 1" - 2" in diameter penetrate the roof.
• The Pipe Portal shall include an 18 gauge galvanized roof curb model RC-___A with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5" 3lb. rigid fiberglass insulation.
• The Pipe Portal shall be furnished with a laminated, acrylic coated, ABS plastic curb cover with pre-punched holes and molded sealing ring on an 8" collared opening.
• An EPDM (Ethylene Propylene Diene Monomer) compression molded cap model C-212 shall be utilized.
• All Caps shall include Portals Plus' stainless steel Snaplock Clamps.