Nozzles

The 935-1 is a green plastic Angle Shot Nozzle used for dispensing 1/10 gallon and quart cartridges in difficult situations. Used for dispensing 1/10 gallon cartridges in difficult situationsTotal Length is 7". Base is 4.5", then turns 45 degrees and extends another 2/5"Fits on top of many standard 1/10 gallon and quart cartridges, or inside an Albion #235-5 Orange cone Nozzle

Albion Engineering 935-4 Bent Cone Nozzle for Albion B-Line Sausage GunsFeatures: Nozzles are bent at 45 degree angle to give you additional reach and the ability to get around corners. 7" long: 1.5" straight then 5.5" additional after 45 degree bend.Reduces strain by eliminating the need to hold dispensing guns at uncomfortable anglesTrim with a utility knife to desired size and shape openingUse with 421-G01 Ring Cap and Beadscope 360 Nozzle 1083-G01 ...

Albion #873-3 B-Line Cone Nozzle is made of durable and wear resistant HDPE plastic that will not split or crack. Can be easily cut to any size with a utility knife. This product is generally used for one application and discarded. Fits all Albion B-Line sausage guns B12S20, B26S20, etc. with #873-5 black plastic ring cap.Features Nozzle Type : Black Plastic ConeCone Length: 4-1/2 inchBase Diameter: 1-1/2 inchMaterial: HDPE plasticBead Size: CustomBead Type: CustomSpecial Applications: B-Line ...

Features: Classic Albion caulk gun cone nozzle for 2" diameter Special Deluxe guns (DL-45, DL-59, etc.)Tough enough to use against brick or concrete. HDPE plastic won't scratch glass or metal.Cut to any size opening from 1/8" to 1-3/4" with utility knifeUse with #421-G01 ring cap (front cap)

Yellow Square Bead Nozzle for Albion Professional Guns: Lays down a flat bead. Less tooling!Applies the right amount of material. Less waste!Easily turns the corner from vertical to horizontal without stopping. Goes down faster!Square nozzle seats itself reliably in the center of the joint.Bright, fluorescent color makes it easy to see sealant as it is being applied.5″ inch Plastic nozzle is easily trimmed with a utility knife to desired size. See directions below.Fits all 2″ diameter barrel...

The 1018-G01 Ribbon Bead Nozzle is an adjustable plastic nozzle used to dispense ribbons of sealant and flashings faster than with a trowel. The nozzle applies a 1/8" thick ribbon of sealant, adjustable width from 2"-4".

Features: Fits all 2" diameter barrel Albion professional bulk and sausage guns, such as the DL-45 and DL-59 series. Nozzles are bent at 45 degree angle to give you additional reach and the ability to get around corners. 7" long: 1.5" straight then 5.5" additional after 45 degree bend.Reduces strain by eliminating the need to hold dispensing guns at uncomfortable anglesTrim with a utility knife to desired size and shape openingUse with 421-G01 Ring Cap and Beadscope 360 Nozzle 1083-G01 ...