- 45° angled outlet provides better reach and visibility in tight spaces
- Trim-to-size tip lets installers customize bead diameter
- Fits all standard 1/10-gallon (10 oz) cartridge spouts
- Durable high-visibility green plastic for easy identification
- Bulk 25-pack for production crews and restocking
Price: $64.65
Item #321-935-1
Write a review!
Description
The Albion 935-1 Angle Shot Green Plastic Nozzle is a trim-to-size, 45-degree dispensing tip for standard 1/10-gallon (10 oz) cartridges. The angled outlet improves reach and sight lines in tight spaces, while the cut-to-size design lets installers match bead diameter to the joint without swapping nozzles. Molded from durable plastic in high-visibility green, these tips thread onto common cartridge spouts and help crews place consistent, clean beads with less tooling. Sold as a 25-pack for shop and field stocking.
Key Features:
-
45° angled outlet improves access and visibility in tight areas
-
Trim-to-size tip lets you cut the opening for the exact bead size
-
Screws onto standard 1/10-gallon (10 oz) cartridge spouts
-
Durable, high-visibility green plastic for jobsite use
-
25-pack supports high-volume production and spares
Specifications
- Model/Series: Angle Shot Cartridge Nozzle
-
SKU/MPN: 935-1
-
Pack Quantity: 25 nozzles
-
Material: Molded plastic
-
Color: Green
-
Angle: 45° outlet
-
Tip Style: Trim-to-size (utility-knife cut)
-
Compatibility: Standard 1/10-gallon (10 oz) sealant/adhesive cartridges; fits most Albion cartridge guns
-
Typical Uses: Beads in confined or obstructed locations; detail work
-
Includes: (25) Angle Shot Green Plastic Nozzles (935-1)
How To
- Determine the required bead size and mark the tip.
-
Trim the nozzle opening carefully with a sharp utility knife.
-
Thread the nozzle onto the 1/10-gallon cartridge spout until snug.
-
Load the cartridge into the gun; purge until flow is steady.
-
Hold the 45° outlet to the joint and dispense at a steady travel speed; wipe or replace before material cures.
FAQs
Q: What cartridges does the 935-1 fit?
A: Standard 1/10-gallon (10 oz) cartridges used with most Albion cartridge guns.
Q: Can I change the bead size?
A: Yes. The tip is trim-to-size—cut the opening to the diameter required.
Q: What is the outlet angle?
A: Approximately 45 degrees to improve reach and visibility.
Q: Is this nozzle reusable?
A: It can be reused if cleaned before the sealant cures; otherwise treat as disposable.
Q: What is included in the package?
A: Twenty-five (25) angle shot green plastic nozzles (935-1).
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
Albion 1018-G01 - 1/8" Ribbon Bead Nozzle
Ribbon Bead Nozzle
Price: $5.75
Availability: In Stock
Usually ships within 1-2 Business Days
The Albion 1018-G01 Ribbon Bead Nozzle lays down a flat 1/8-inch-thick ribbon of sealant for fast, uniform coverage on flashing, air barrier, and lap-joint work. Its adjustable mouth starts at 2 inches wide and can be enlarged to 2-1/2, 3, 3-1/2, or 4 inches by trimming the nozzle in 1/2-inch increments with a utility knife. The durable, two-piece plastic design works with cartridge, sausage, and bulk applicators, helping crews place neat, consistent ribbons far faster than troweling and with...
Albion B26 10 oz Caulk Gun - Manual Cartridge Dispenser
Excellent for all sealants - especially handy for thicker materials and in cold weather
Price: $36.40
Availability: In Stock
Usually ships within 1-2 Business Days
The Albion B26 is a professional 1/10-gallon (10 oz / 300 mL) manual cartridge gun that combines a high-thrust 26:1 smooth-rod drive with a rigid metal half-barrel carriage for clean starts and consistent bead control. The increased mechanical advantage delivers steady flow with standard to thicker construction sealants and adhesives, while the open carriage improves tip visibility for precise placement along joints, corners, and details. A built-in puncture wire speeds setup and an integrated...
Albion B12 10 oz Manual Caulk Gun - Smooth-Rod Drive for...
Ideal for typical sealant jobs requiring moderate force and good ergonomics.
Price: $37.95
Availability: In Stock
Usually ships within 1-2 Business Days
The Albion B12 is a professional 1/10-gallon (10 oz / 300 mL) manual cartridge gun designed for precise, repeatable bead placement with common construction sealants and adhesives. Its 12:1 smooth-rod drive multiplies hand force for controlled flow on standard-viscosity materials, while the metal half-barrel carriage speeds loading and keeps the nozzle visible for clean starts and consistent beads. A built-in puncture wire simplifies opening the inner seal, and the integrated ladder hook helps...
Albion 935-3 Bent Cone Nozzle for Albion Professional Guns...
Fits all 2" diameter barrel Albion professional bulk and sausage guns, such as the DL-45 and DL-59 series.
Price: $6.95
Availability: In Stock
Usually ships within 1-2 Business Days
The Albion 935-3 Bent Cone Nozzle is a pre-bent, trim-to-size dispensing tip for Albion Professional Line 2-inch barrel sausage and bulk guns. The angled outlet improves reach and sight lines around obstructions, while the cut-to-size design lets installers set bead diameter without swapping tips. Each nozzle seats under the correct Professional Line ring/front cap (e.g., 421-G01) for a secure, leak-resistant fit that speeds production on long runs and detailed joints. Sold as a 3-pack for...