Caulk Gun Accessories

The Albion 1055-1 Insulating Barrel Sleeve helps maintain sealant temperature and comfort in cold or hot conditions by insulating 2" diameter sausage and bulk gun barrels. Made from 3 mm neoprene double-lined with polyester (similar to a wetsuit), the 13" sleeve slips over the barrel for a snug fit on common Albion models and provides a warmer, more secure grip while reducing heat loss from the material column. It can also serve as a convenient holder for small tools such as a spatula or...

The Albion 935-4 Bent Cone Nozzle is a pre-bent, trim-to-size dispensing tip for Albion B-Line 2-inch barrel sausage guns. The angled outlet improves reach and sight lines around obstructions, while the cut-to-size design lets installers set the bead diameter without swapping tips. Each nozzle seats under the proper B-Line ring/front cap (e.g., 868-1) for a secure, leak-resistant fit that speeds production on long runs and detailed joints. Sold as a 3-pack for convenient stocking. Key...

The Albion 935-1 Angle Shot Green Plastic Nozzle is a trim-to-size, 45-degree dispensing tip for standard 1/10-gallon (10 oz) cartridges. The angled outlet improves reach and sight lines in tight spaces, while the cut-to-size design lets installers match bead diameter to the joint without swapping nozzles. Molded from durable plastic in high-visibility green, these tips thread onto common cartridge spouts and help crews place consistent, clean beads with less tooling. Sold as a 25-pack for...

The Albion 873-3 B-Line Black Cone Nozzles are trim-to-size plastic tips for general-purpose sealing and bonding with Albion B-Line 2-inch barrel sausage guns. Each cone can be cut to the opening you need, helping installers size beads precisely without swapping tips. The nozzles seat under the proper B-Line ring/front cap for a secure, leak-resistant fit that speeds production across long runs and repetitive joints. Sold as a 10-pack for shop and field stocking. Key Features: Trim-to-size...

The Albion 235-3 Orange Cone Nozzle is a trim-to-size plastic dispensing tip for fast, clean bead placement on general sealing and bonding work. Each cone can be cut to the opening you need with a utility knife, helping crews size beads precisely without swapping tips. Designed for Albion 2" barrel sausage and bulk applicators in both the Professional Line and B-Line, these high-visibility orange nozzles seat under the correct ring/front cap for a secure, leak-resistant fit and efficient...

The Albion 504-G Slip-On Follow Plate is a tapered, no-threading pail/bucket follow plate for fast, clean bulk loading. Its push-on/pull-off center seal fits 2-inch Albion barrels, while steel plates sandwich a resilient gasket that scrapes the pail wall to reduce waste and block debris and air from entering the gun. Designed for 3–5 gallon tapered or straight-sided metal or plastic pails, the 504-G speeds production, keeps barrels clean, and improves priming when loading bulk sealants and...

The Albion 1135-4 Green Square Bead Nozzle is a trim-to-size plastic tip for Albion B-Line 2" barrel sausage guns that centers itself in the joint to lay a flat, uniform square bead with less tooling and waste. Its bright fluorescent green color improves visibility of the sealant flow, while the outlet can be cut with a utility knife to match joint size for glazing, fillet/cove, and other flat-bead applications. Sold as a 25-pack to speed production across long runs and repetitive joints. Key...

The Albion 1018-G01 Ribbon Bead Nozzle lays down a flat 1/8-inch-thick ribbon of sealant for fast, uniform coverage on flashing, air barrier, and lap-joint work. Its adjustable mouth starts at 2 inches wide and can be enlarged to 2-1/2, 3, 3-1/2, or 4 inches by trimming the nozzle in 1/2-inch increments with a utility knife. The durable, two-piece plastic design works with cartridge, sausage, and bulk applicators, helping crews place neat, consistent ribbons far faster than troweling and with...

The Albion 33-10 Flexible Rubber Loading Sleeve slips over 2-inch barrel bulk and sausage guns to help draw material directly from pails with less mess, dripping, and air entrapment. Its elastic rubber body provides a snug seal around the barrel while flexing to follow the contour of the pail, improving suction and loading speed. Reusable and simple to clean, the 33-10 is a jobsite staple for high-volume bulk loading on Professional Line and B-Line 2" barrel applicators. Key Features: Flexible...

The Albion 1135-3 Yellow Square Bead Nozzle is a trim-to-size plastic tip that seats itself in the center of the joint to lay down a flat, uniform square bead with minimal tooling. Designed for Albion 2" barrel Professional Line and B-Line bulk/sausage applicators (used with the proper ring/front cap), this 25-pack speeds fillet and cove joints, glazing, and other flat-bead applications across long runs by improving accuracy, visibility, and consistency while reducing waste. Key Features:...

The Albion 800-G01 Bulk Gun Barrel Brush uses stiff brass bristles and a curved steel handle to scrub residue from the inside of 2-inch steel bulk gun barrels. The right-angle shank gives hand leverage and knuckle clearance for controlled cleaning, while brass bristles cut buildup without gouging the steel bore. Designed for manual use, this brush helps restore smooth loading and dispensing performance and is a staple for maintaining bulk and sausage applicators. It is not recommended for...

The Albion 935-3 Bent Cone Nozzle is a pre-bent, trim-to-size dispensing tip for Albion Professional Line 2-inch barrel sausage and bulk guns. The angled outlet improves reach and sight lines around obstructions, while the cut-to-size design lets installers set bead diameter without swapping tips. Each nozzle seats under the correct Professional Line ring/front cap (e.g., 421-G01) for a secure, leak-resistant fit that speeds production on long runs and detailed joints. Sold as a 3-pack for...

The Albion 32-112 is a 12-inch bendable aluminum nozzle with a 3/8-inch ID threaded base, designed to reach confined or obstructed areas where standard tips can’t. The malleable aluminum tube can be hand-shaped to your desired angle and will hold its form for consistent placement, while the threaded base mates with the proper adapter on Albion cartridge, sausage, or bulk guns. Trim the outlet to size if needed, then dispense a controlled bead along deep joints, behind hardware, or around...