Albion E12S20 20oz Core Cordless Sausage Gun 12V

The Albion E12S20 Core Cordless Sausage Gun delivers smooth, repeatable output from 20 oz (600 mL) sausage packs using a compact 12-volt drive and a rotating 2" barrel for accurate bead placement around corners and details. A variable-speed trigger and top speed dial let you match flow to material and nozzle size, while auto-reverse briefly backs off pressure at release to minimize ooze and stringing. The threaded front cap accepts standard cone tips for a tight, leak-resistant fit, and the rigid frame keeps the plunger aligned for clean starts, consistent bead size, and less fatigue during long production runs.

Key Features:

• 12V cordless drive with variable-speed trigger and top speed dial
  
• Auto-reverse anti-drip reduces ooze at starts and stops
  
• Rotating 2" barrel for better access and bead orientation
  
• Threaded front cap accepts standard cone nozzles
  
• Compact, ergonomic build for daily professional use

• Model/MPN: E12S20
• Line/Type: Core cordless sausage dispenser
• Capacity: 20 oz (600 mL) sausage packs
• Power: 12V Li-ion cordless
• Output (approx.): up to ~400 lbf (≈130 psi equivalent)
• Barrel: 2" diameter; rotating
• Speed Control: Variable-speed trigger with max-speed dial; auto-reverse anti-drip
• Nozzle Interface: Threaded front cap for trim-to-size cone tips
• Typical Applications: Roofing, glazing, façade, and general construction joints
• Includes: E12S20 cordless gun, threaded front cap, cone nozzles, 12V battery (1004-3), 30-minute charger (1004-4)

• Charge and install the 12V battery; verify trigger and forward/reverse operation.
• Fit the threaded front cap and a compatible cone nozzle.
• Open the barrel, insert a 20 oz sausage, and close securely.
• Pierce the sausage clip/nozzle end per material guidance and seat the nozzle.
• Set the speed dial low; pulse the trigger until flow is steady, then adjust speed for bead size.
• Dispense with a steady angle and travel speed; allow auto-reverse to stop flow. Relieve pressure and clean before cure.

Q: What package size does the E12S20 accept?
A: 20 oz (600 mL) sausage packs.

Q: Is a battery and charger included?
A: Yes. A 12V Li-ion battery (1004-3) and 30-minute charger (1004-4) are included.

Q: Does the tool have anti-drip?
A: Yes. Auto-reverse backs off pressure at trigger release to reduce ooze and stringing.

Q: What nozzle connection does it use?
A: A threaded front cap that accepts standard trim-to-size cone nozzles.

Q: How powerful is it?
A: Up to roughly 400 lbf (about 130 psi equivalent), suitable for common construction sealants and adhesives.