Albion E12Q 1 Quart Cordless Cartridge Gun - 12V Swivel-Carriage Applicator

The Albion E12Q is a 12-volt cordless 1-quart (28–32 oz) cartridge gun designed for fast, controlled dispensing of high-volume cartridges. A variable-speed trigger and top-mounted speed dial regulate flow, while auto-reverse briefly backs off pressure at trigger release to minimize ooze and stringing. The lightweight swivel half-barrel carriage keeps the nozzle oriented through corners and long runs, and jobsite conveniences—built-in puncture wire, ladder hook, and a comfortable over-molded grip—streamline setup and handling. Delivering up to roughly 400 lbf of force (about 130 psi), the E12Q kit equips crews to place consistent beads with less fatigue across glazing, façade, roofing, and general construction work.

Key Features:

• 12V cordless drive with variable-speed trigger and speed dial
• Auto-reverse anti-drip reduces ooze at starts and stops
• Swivel half-barrel carriage for better bead orientation and access
• Built-in cartridge puncture wire and ladder hook
• High output force (≈400 lbf / ≈130 psi) for reliable, consistent flow

• Model/MPN: E12Q
• Capacity: 1 quart (28–32 oz / ~825 mL) cartridges
• Power: 12V Li-ion cordless drive
• Force / Pressure (approx.): 400 lbf / 130 psi
• Speed Control: Variable-speed trigger with top dial; auto-reverse anti-drip
• Carriage: Swivel/rotating half-barrel
• Convenience: Built-in puncture wire; ladder hook; over-molded handle
• Color/Finish: Green/Black
• Includes: E12Q cordless gun; 12V battery (1004-3); 30-minute charger (1004-4)

• Charge and install the 12V battery; verify trigger and forward/reverse operation.
• Prepare the cartridge: cut the nozzle to size and pierce the inner seal with the built-in puncture wire.
• Load: open/rotate the half-barrel, seat the 1-quart cartridge, then close the carriage securely.
• Prime: set the speed dial low; pulse the trigger until material reaches the tip; wipe the nozzle.
• Dispense: hold a steady angle and travel speed; adjust trigger and dial for bead size; let auto-reverse stop flow at bead ends.
• Finish: release pressure, hang by the ladder hook, and clean the nozzle before material cures.

Q: What cartridge size does the E12Q accept?
A: Standard 1-quart (28–32 oz / ~825 mL) cartridges.

Q: Is a battery and charger included?
A: Yes. The kit includes a 12V Li-ion battery (1004-3) and a fast 30-minute charger (1004-4).

Q: Does it have anti-drip?
A: Yes. Auto-reverse briefly backs off pressure at trigger release to reduce ooze and stringing.

Q: How powerful is the gun?
A: Up to roughly 400 lbf of force (about 130 psi equivalent), suitable for common construction sealants and adhesives.

Q: What carriage style does it use?
A: A swivel/rotating half-barrel carriage for better access and bead alignment.