Portals Plus

Medium White Boot w/ Pourable Sealer Pockets Furnish and install the Portals Plus Medium Pipe Boot at all points where any projection penetrates the roof system, and is less than 6" in diameter. The Medium Pipe Boot shall include 60 mil EPDM or NEOPRENE compression molded body and shall include 70 mil PVC (Polyvinyl Chlo-ride) or TPO (Thermoplastic Olefin) injection molded body.The Medium Pipe Boot shall also include Portals Plus' Snaplock Clamp.Whenever necessary utilize Portals Plus Adapters...

The PedestalPlus offers a convenient, functional and practical means to securing rooftop pipe runs. Features a white, UV stable, reinforced PVC base composed of 25 percent recycled material Contributes to LEED section 4.2 Recycled Content, 5.2 Regional Materials and 7.2 Heat Island Effect. Accommodates rooftop piping applications―including gas, refrigeration, electrical and solar conduit lines―from 1/2” to 3” in diameter Supports multiple pipes, and loads up to 150 pounds, with the supports...

5-Hole Pipe Portal Flashing System For pipe penetrations from 1/2" to 2-1/2" Nominal Pipe O.D.Provide pre-manufactured Pipe Portal® flashing systems as manufactured by Portals Plus at all necessary roof penetrations 2-1/2"" or less, or as shown on drawings. Each 5-Hole Pipe Portal® flashing system can be requested to include an RPS pre-manufactured roof curb of style as shown on drawings or as specified for roof curbs, single or double Pipe Portal® flashing system cover with sealing ribs on...

Portals Plus insulation Breathers and Vents are used to prevent moisture vapor from becoming trapped in the roof system, equalizing air pressure, reducing the risks of ballooning, blow-off, deteriorating insulation and separating deck seams. The Portals Plus Vents have a one way valve designed in the unit to prevent moisture from re-entering the roof system. The Portals Plus Breathers allow for both exhaust and convective movement of air between breathers. Both the Breather and Vent are...