Portals Plus Drains

The Portals Plus 4″ Aluminum ReRoof Drain with Aluminum Dome is built specifically for retrofit applications over existing 4″ drains. It offers a spun aluminum flange for flush installation, a cast-aluminum dome strainer for durability, and multiple seal options (Premier Seal, Rubber Seal, Tape Seal) to ensure a watertight connection. Designed for rooftop installation without special tools, it delivers a dependable termination point for drainage systems. Key features: Spun aluminum flange and...

The Portals Plus 2″ Aluminum ReRoof Drain is built for retrofit use where an existing drain needs a watertight replacement. Both models feature a spun aluminum flange, cast aluminum gravel guard, and poly dome strainer. Model 66091 uses a pre-compressed expanding foam tape seal, while model 66691 uses a rubber seal. Each provides a permanent, flexible, watertight connection between the drain and existing pipe system. Key features: Spun aluminum flange and cast aluminum clamping ring for...

The Portals Plus ABS Drain with Poly Dome is a roof drainage solution designed for both new and retrofit applications on single-ply and built-up roof systems. It includes an injection-molded UV-stable ABS drain body, a molded UV-stable polyethylene (poly) dome strainer, a cast-aluminum epoxy-coated clamping ring with gravel guard, a cast-aluminum under-deck clamp, and a flexible EPDM connector with stainless steel hardware. Available in sizes to fit 3″, 4″, and 6″ internal drain openings. Key...

The Portals Plus 3″ Aluminum ReRoof Drain with Aluminum Dome is built for retrofit applications where existing roof drains require reliable replacement. Each model features a spun aluminum flange, cast aluminum dome strainer, and heavy-duty hardware designed for long-term watertight protection. The drain installs directly into existing 3″ drain bodies without special tools, offering a secure fit and dependable moisture control. Available models include the Premier Seal, Rubber Seal, and Tape...

The Portals Plus ABS ReRoof Drain with Aluminum Dome is a retrofit-friendly roof drain solution designed to install from the rooftop without removal of existing drain plumbing. Each assembly includes a 14” O.D. injection-molded black ABS flange with flashing lock, a cast aluminum dome strainer and gravel guard/clamping ring, and a pre-compressed expanding foam tape seal that forms a watertight connection to the existing drain pipe. It is engineered for efficiency, minimal tool requirement, and...

The Portals Plus 2″ Aluminum ReRoof Drain (SKUs 66101 / 66601) is designed for retrofit reroof applications, replacing existing drains without full removal. The unit features a spun aluminum O.D. flange (15″ or 18″), a cast aluminum gravel guard and clamping ring, and a cast aluminum dome strainer. It includes either a pre-compressed expanding foam tape seal (66101) or a rubber seal (66601) to form a watertight connection to the existing drain body. Key features: Cast aluminum dome strainer,...

This Portals Plus 3″ Aluminum ReRoof Drain is designed specifically for retrofit installations—replacing the drain directly on the roof without needing to remove the underlying system. It includes a spun aluminum flange (15″ or 18″ O.D.), a poly (UV-stable polyethylene) dome strainer, and your choice of sealing technology: Premier Seal (68000), Rubber Seal (66611) or Tape Seal (66111). The design ensures watertight performance for existing drain bodies in reroof projects. Key features: Poly...

The Portals Plus ABS Drain with Aluminum Dome is a roof-drain kit engineered for both new installations and retrofit (re-roof) applications on single-ply and built-up roofing systems. It includes an injection-molded UV-stable ABS drain body, a cast aluminum dome strainer, an epoxy-coated cast aluminum clamping ring and gravel guard, a cast aluminum under-deck clamp, and a flexible EPDM connector with stainless steel clamps. Available in sizes to fit 3″, 4″ and 6″ internal drain openings. Key...

The Portals Plus 61101 PVC Plus Pack Roof Drain is designed for new and retrofit roof systems, including single-ply and BUR applications. It includes an injection-molded ultraviolet-stabilized PVC drain body, an epoxy-coated cast-aluminum clamping ring with gravel stop, an aluminum under-deck clamp, and a molded ultraviolet-stabilized polyethylene (poly) dome strainer. The kit is engineered for secure, reliable installation and durability. Key features: Injection-molded UV-stabilized PVC drain...

The Portals Plus White PVC Plus Pack w/ Poly Dome is a ready-to-install roof drain kit designed for both new and retrofit applications on single-ply and BUR roof systems. It includes an injection-molded UV-stabilized PVC drain body, a molded UV-stabilized polyethylene (poly) dome strainer, epoxy-coated cast aluminum gravel guard/clamping ring, a cast aluminum under-deck clamp, and a flexible EPDM connector with stainless clamps. The kit is engineered for reliability, easy installation, and...

The Portals Plus Aluminum Scupper Drain is designed for side-wall or parapet wall roof installations where drainage must travel through a wall or side of the roof. It features a cast aluminum sump body measuring 6″ tall by 11″ wide, a removable bolted flashing clamp allowing secure termination of the roofing membrane and flashing plies, and a no-hub outlet extension capable of horizontal, vertical or 45° positioning. Available in 2″ (67301), 3″ (67311), and 4″ (67321) sizes. Key features: Cast...

The Portals Plus 4″ Aluminum Insert Drain w/ Rubber Seal (POR-66801) is designed for retrofit installations over existing drains during reroof projects. It features a spun aluminum flange (15″ or 18″ O.D.) and an extruded aluminum outlet pipe welded continuously to the flange. A pre-compressed, modified asphalt-impregnated foam or rubber seal forms a watertight connection with the existing drain body, rated from -40 °F to +185 °F with at least 150% elongation. Installation is completed...

The Portals Plus PVC Plus Pack w/ Aluminum Dome is a comprehensive roof-drain kit designed for both new and retrofit installations on single-ply and built-up roofing systems. Each kit includes an injection-moulded UV-stabilized PVC drain body, a 6″ Schedule 40 body extension, a cast aluminum under-deck clamp, a flexible EPDM connector with stainless steel clamps, and a cast aluminum dome strainer with epoxy-coated gravel guard/clamping ring. The kit is engineered for durability, minimal field...

The Portals Plus 3″ Aluminum Insert Drain w/ Rubber Seal (POR-66301) is designed for retrofit of existing roof drains without full removal. It features a spun aluminum flange (15″ or 18″ O.D.), an extruded aluminum outlet pipe continuously welded to the flange, and a pre-compressed modified asphalt-impregnated foam or rubber seal that creates a watertight connection with the existing drain. The seal is rated for –40 °F to +185 °F and minimum 150% elongation, tested under high water pressure...

The Portals Plus 5″ Aluminum ReRoof Drain w/ Poly Dome is built specifically for retrofit applications replacing existing 5″ drains. It features a spun-aluminum flange and a UV-stable molded polyethylene (poly) dome strainer, and is available in multiple sealing configurations—Premier Seal (68004) or Tape Seal (66131). The drain is designed for rooftop installation without special tools, offering a secure, watertight termination point for drainage systems. Key features: Spun-aluminum flange...

The Portals Plus 2″ Aluminum Insert Drain w/ Rubber Seal (POR-66201) provides a retrofit solution for existing roof drains during re-roofing projects. The unit includes a spun aluminum flange (15″ or 18″ O.D.) and an extruded aluminum outlet pipe with a continuous weld to the flange. It features a pre-compressed, modified asphalt-impregnated expanding foam or rubber seal that forms a watertight connection with the existing drain body, rated from –40 °F to +185 °F with at least 150 %...

The Portals Plus 12″ Robertson Head Screwdriver (POR-68008) is designed specifically for use with the Premier Seal system on Portals Plus roof drains. It features a Robertson-head drive to activate the internal screws of the seal assembly, enabling proper tightening and sealing of the drain system. The 12″ length provides sufficient reach for rooftop installation scenarios. Key features: Designed for use with the Premier Seal system on Portals Plus roof drains. Robertson-head drive ensures...

The Portals Plus ABS ReRoof Drain w/ Poly Dome is a rooftop-installed retrofit drain designed to replace existing roof drains without special tools. Each unit features a molded polyethylene (poly) dome strainer, epoxy-coated cast aluminum gravel guard and clamping ring, and a 14″ O.D. injection-molded black ABS flange with flashing lock. The outlet pipe includes a pre-compressed, modified asphalt-impregnated expanding foam tape seal rated for –40 °F to +185 °F with 150% minimum elongation. All...

The Portals Plus ABS Roof Drain Plus Pack with Aluminum Dome is a comprehensive roof-drain kit engineered for both new construction and retrofit applications in single-ply and built-up roof systems. It includes an injection-molded UV-stable ABS drain body, a cast aluminum dome strainer, cast aluminum gravel guard and clamping ring, a cast aluminum under-deck clamp, and a flexible EPDM connector with stainless steel clamps. Available in sizes suited for 3″, 4″ and 6″ internal drain openings....

The Portals Plus PVC Roof Drain with Aluminum Dome (61071) is engineered for compatibility with a 6″ outlet and commercial roofing systems. The assembly includes an injection-molded ultraviolet-stabilized PVC drain body with a 6″ schedule 40 body extension, a cast aluminum dome strainer, a cast aluminum epoxy-coated gravel guard and clamping ring, a cast aluminum underdeck clamp, and a flexible EPDM connector with stainless steel clamps. Key features: Designed for a 6″ outlet, supporting...

The Portals Plus 3″ Insert Dome (POR-67085) is a cast aluminum dome strainer designed to be paired with compatible ReRoof Aluminum Drain Insert units. It serves as the visible top-strainer portion of the retrofit drain assembly, suitable for new or reroof installations as part of a complete drainage system. Key features: Designed to pair with any ReRoof Aluminum Drain Insert system. Cast aluminum construction for durability and corrosion resistance. Specifically sized for 3″ drain insert...

The Portals Plus Cast Iron Plus Pack Roof Drain with Poly Dome is designed for both new and retrofit roof drainage applications. It features a heavy cast iron drain body, a molded UV-stabilized polyethylene (poly) dome strainer, cast-aluminum epoxy-coated gravel guard and clamping ring, a cast-aluminum under-deck clamp, and a flexible EPDM expansion coupling with stainless steel clamps. This kit is engineered to provide reliable performance in single-ply and built-up roof systems. Key...

The Portals Plus 68006 and 66141 6-inch aluminum reroof drains provide retrofit drainage solution with complete rooftop installation using stainless steel hardware. The models feature a spun aluminum flange, molded ultraviolet-stabilized polyethylene or cast aluminum dome strainer, and an outlet tube with pre-compressed modified asphalt impregnated expanding foam sealing tape rated from ­40 °F to +185 °F and 150% elongation. Model 68006 includes the Premier Seal mechanically expandable rubber...

The Portals Plus Cast Iron Plus Pack Roof Drain with Aluminum Dome is a comprehensive kit built for both new installations and retrofit (re-roof) projects. Each unit features a cast iron drain body for structural durability, a cast-aluminum dome strainer for high resistance to wear and weather, a cast-aluminum under-deck clamp, and a flexible EPDM expansion coupling with stainless steel hardware. The kit is designed for single-ply or built-up roof drainage systems. Key features: Cast iron...

The Portals Plus ABS Roof Drain Plus Pack with Plastic Dome is a versatile drain kit designed for both new and retrofit installations in single-ply or built-up roof systems. It includes an injection-molded UV-stable ABS drain body, a molded UV-stable polyethylene (plastic) dome strainer, a cast aluminum clamping ring with gravel guard, a cast aluminum under-deck clamp, and a flexible EPDM coupling with stainless steel clamps. Available to fit 3″, 4″ and 6″ internal drain openings. Key...

The Portals Plus 4″ Insert Dome (POR-67095) is a dome accessory intended for use with ReRoof Aluminum Drain Insert systems. Sized for 4″ insert applications, it provides the dome component for retrofit drain assemblies and is listed as compatible with any ReRoof Aluminum Drain Insert on the product page. Key features: 4″ insert dome sized for retrofit drain applications. Pairs with any ReRoof Aluminum Drain Insert system. Provides the dome component for a complete insert drain assembly....

The Portals Plus 6″ Aluminum Insert Drain w/ Tape Seal (POR-66634) is designed for retrofit applications, allowing installation above an existing drain without full removal. It includes a spun aluminum flange (15″ or 18″ O.D.), an extruded aluminum outlet tube welded to the flange, and a pre-compressed modified asphalt impregnated expanding-foam sealing tape that forms a watertight compression seal to the existing drain body—rated from –40 °F to +185 °F with minimum 150% elongation. The unit...

The Portals Plus 65171 is an ABS rerofit-type roof drain insert designed for servicing existing drain openings during a reroof project. It features an aluminum dome and an expanding modified asphalt impregnated sealing tape that forms a permanent elastic watertight seal with the inside of the existing drain pipe. The unit has a flat flange underside for flush installation on the roof or insulation surface. Key features: Retrofit drain insert designed to sleeve into an existing drain pipe to...

The Portals Plus 66181 and 68007 are 6-inch aluminum re-roof drains engineered for retrofit installation with all rooftop access and stainless steel hardware. Model 66181 features the Tape Seal system while model 68007 uses the Premier Seal mechanical system. Both are equipped with an aluminum dome strainer and designed to fit over existing drain openings to simplify reroof drainage connections. Key features: Retrofit drain assembly for existing 6-inch pipe openings without full drain removal....