The Portals Plus 29305 Double Curb Cover is a component for double pipe portal systems. It is constructed of laminated, acrylic-coated ABS plastic and features two pre-punched 8″ openings with molded sealing rings to seat compatible caps. This listing is for the cover only; caps are not included. The tan cover provides a clean, finished top for the roof curb assembly while accommodating the chosen cap configuration. Key features: Laminated, acrylic-coated ABS plastic construction for...

The Portals Plus Double Pipe Portal Cover (POR-36062) provides a reliable solution for multiple pipe penetrations in commercial roofing. It supports up to six pipes sized .375″-1″ in diameter and up to two pipes sized 1″-2″ in diameter. The unit features an 18-gauge galvanized roof curb with welded seams, a factory-installed wood nailer, and 1.5″-thick 3 lb rigid fiberglass insulation. The curb is topped with a laminated, acrylic-coated ABS plastic cover featuring two 8″ collared openings and...

The Portals Plus 36002 Double Pipe Portal Cover with C-126 & C-212 Caps (Tan) is a complete dual-portal flashing system. The unit includes a laminated, acrylic-coated ABS plastic curb cover that features two 8″ collared openings with molded sealing rings. It is paired with two EPDM compression-molded caps: model C-126 and model C-212, each equipped with stainless-steel Snaplock clamps. The product is specified for roof penetrations where up to two pipes ⅜″-1″ in diameter, up to two pipes 1″-2″...

The Portals Plus 22051 Alumi-Flash Standard Base with C-182 Black Cap is specified for flashing a single roof penetration in the 8″-12″ diameter range. The unit includes a .060″ spun aluminum base, 4″ high, with a 22″ base diameter and a 14″ collared opening featuring two roll-formed sealing beads. The molded EPDM C-182 cap uses a stainless-steel Snaplock clamp for a mechanical weather-tight seal. Key features: Designed for a single penetration sized 8″-12″ in diameter. .060″ spun aluminum...

The Portals Plus Double Pipe Portal Cover (POR-36022) provides a reliable solution for sealing multiple roof penetrations. Designed for one large 2–6 inch pipe and up to four smaller 0.375–1 inch pipes, it features an 18-gauge galvanized roof curb with factory-installed insulation and a laminated ABS plastic cover. Two EPDM compression caps, models C-126 and C-481, include stainless steel Snaplock clamps to create a weather-tight, flexible seal that accommodates roof movement and pipe...

The Portals Plus 32141 Large RC-3A Canted Curb is designed for non-insulated roof decks where a canted (sloped) curb is required. The unit measures 20″ by 20″ by 8″ high and is fabricated of 18-gauge galvanized steel with an integral base plate, continuously welded corner seams, and a factory-installed wood nailer. It includes 1.5″ thick, 3 lb density rigid fiberglass insulation on all four sides. This curb is intended for use with Portals Plus pipe portal cover components. Key features:...

The Portals Plus Double Pipe Portal Cover (POR-36102) is designed for commercial rooftop penetrations where multiple smaller and medium-sized pipes must be routed. It features an 18-gauge galvanized roof curb with integral base plate, continuously welded corner seams, and factory-installed 1.5″-thick 3 lb rigid fiberglass insulation. The laminated, acrylic-coated ABS plastic curb cover includes two 8″-collared openings fitted with two EPDM compression-molded caps (models C-412 and C-481) each...

The Portals Plus 29265 C-126 White Cap w/ Clamp is a molded EPDM compression cap designed for a single roof pipe penetration sized 2″-6″ in diameter. The cap includes the stainless-steel Snaplock clamp and is intended for use with compatible Alumi-Flash or Plasti-Flash base systems (base sold separately). The cap allows the penetration to move independently of the roof while maintaining a weather-tight seal. Key features: Designed for a single roof penetration sized 2″-6″ diameter. ...

The Portals Plus Large RC-2A Straight Sided Curb (20″ × 20″ × 11″ High) is designed for roof decks with lightweight fill or tapered insulation. Fabricated from 18-gauge galvanized steel, it includes an integral base plate, continuously welded corner seams, and a factory-installed wood nailer. The curb also contains 1.5″ thick, 3 lb/ft³ rigid fiberglass insulation on all four sides, providing thermal protection and structural strength for pipe portal and rooftop equipment systems. Key features:...

The Portals Plus 36012 Double Pipe Portal Cover with C-126 & C-412 Caps (Tan) provides a dual-portal flashing solution for roofs needing one large and multiple small penetrations. It includes a laminated, acrylic-coated ABS cover with two 8″ collared openings and molded sealing rings, plus two EPDM caps (models C-126 and C-412) each fitted with stainless-steel Snaplock clamps. Designed for use with a compatible RC-A roof curb, this assembly accommodates one 2″–6″ and up to four .1″–2″ pipes....

The Portals Plus 32151 Large RC-4A Raised Canted Curb is engineered for roof decks with rigid insulation requiring a raised-canted (sloped) wall design. It measures 20″ × 20″ with a height of 9 ½″ and is fabricated of 18 gauge galvanized steel with a full base plate, continuously welded corner seams, and a factory-installed wood nailer. It is insulated with 1.5″ thick, 3 lb density rigid fiberglass insulation on all four sides. Designed for use with the appropriate 320-series curb cover...

The Portals Plus 29205 White Curb Cover with C-126 Black Cap (SM1) is a cover component used in pipe portal flashings. It is constructed of laminated, acrylic-coated ABS plastic and features a pre-punched hole and a molded sealing ring. The cap is sold separately. The cover is intended for use with the C-126 Black Cap in SM1 configuration and designed to provide a clean top finish for a roof curb assembly. Key features: Laminated, acrylic-coated ABS plastic cover with pre-punched hole and...

The Portals Plus 29295 Large Pipe Portal Cover is built for roof curb-mounted flashing systems where large penetrations require a robust cover solution. It is made of laminated, acrylic-coated ABS plastic and includes a collar opening sized for a compatible C-182 cap, with a molded sealing ring to seat the cap securely. This listing is for the cover only; the cap is sold separately. Key features: Laminated, acrylic-coated ABS plastic construction with enhanced UV/ozone resistance. Pre-punched...