Ivy Classic

Built for maximum stability and control, the 11154 locks a standard utility blade in a rigid, non-retracting body so every cut feels solid and predictable. The Hinge-Loc swing-open design makes blade changes fast and tool-free, while the contoured, non-slip handle keeps your grip secure on heavy materials—from roofing and drywall to carpet and flooring. Key Features Hinge-Loc swing-open body for quick, tool-free blade changes—no loose parts. Fixed-blade design provides maximum rigidity and...

Built for fast plunge cuts and clean openings, this compact wallboard saw slices through drywall with aggressive try-edge teeth and a rigid, tapered blade. A sharp point starter tip punches in precisely where you need it, while the Power Pro non-slip handle keeps your grip locked in for controlled, low-effort cutting—perfect for boxes, vents, and quick remodel cutouts. Key Features 6-1/2" tapered blade with try-edge tooth geometry for fast, smooth drywall cuts. Sharp point starter tip for...

Built for speed and control, the 11153 pairs a rugged metal body with a rapid-reload blade system so you can swap blades in seconds—no tools, no fuss. A smooth multi-position slide sets the perfect cutting depth, while the contoured, non-slip handle keeps your grip locked in for confident, accurate cuts across roofing, drywall, flooring, packaging, and more. Key Features Rapid-reload, tool-free blade change system for fast swaps and minimal downtime. Multi-position retractable slide to...

Built for demolition-grade roofing work, the 36034 chews through plywood/OSB decking and nail-embedded lumber with confident, straight tracking. Its coarse 14-tooth grind and deep gullets move chips fast, while tough carbide tips shrug off nails and stay sharp longer—perfect for tear-offs, re-sheeting, and framing on harsh jobsites. Key Features 7-1/4" diameter, 14T configuration for fast, aggressive cuts in decking and nail-embedded wood. Heavy-duty carbide-tipped teeth deliver extended edge...

Built for solo measuring and fast reads, this 25-footer combines a grippy, shock-resistant case with a double-sided blade you can read from any angle. The magnetic end hook bites onto studs, ductwork, and hardware so you can pull long spans without a second set of hands, while smooth blade action and a positive lock keep measurements precise on busy jobsites. Key Features 25 ft measuring length with high-contrast markings for quick, accurate reads. Double-sided blade printing for overhead,...

Built for heavy Robertson screws, this 2" SQ3 power bit delivers rock-solid engagement and serious torque without cam-out. A precision-machined square tip teams with a heat-treated S2 tool-steel core for long life in drills and impact drivers. The 2" length clears chuck jaws for better sightlines and control, while the 1/4" hex shank locks securely into standard bit holders and magnetic sleeves—perfect for decking, framing connectors, and tough assembly work. Key Features Precision SQ3 square...

Engineered for long solo pulls and fast reads, this 33-footer pairs a shock-resistant rubber-grip case with a double-sided blade you can read from any angle. The magnetic true-zero hook bites studs, ductwork, and hardware for hands-free catches, while smooth recoil and a positive lock keep dimensions locked in on busy jobsites. Key Features 33 ft measuring length with high-contrast, easy-read markings. Double-sided blade printing for overhead, vertical, and tight-space measurements. Magnetic...

Built for tough, everyday cutting, the 11150 pairs a double-interlocking zinc body with a smooth multi-position slide for a rock-solid, wobble-free blade hold. The tool-free change system swaps blades in seconds, while the contoured, non-slip grip keeps your hand secure through long shifts—perfect for roofing, drywall, flooring, packaging, and general trades. Key Features Double interlocking body clamps the blade on both sides for superior rigidity and safer cuts. Multi-position retractable...

Engineered for quick blade swaps and firm control, the 11151 uses a hinged, swing-open body to change blades in seconds—no tools, no loose parts. A smooth multi-position slide sets precise cutting depth, while the rugged metal housing and contoured, non-slip grip keep your hand steady on tough cuts across roofing, drywall, flooring, packaging, and more. Key Features Hinge-Loc swing-open body for fast, tool-free blade changes—no small pieces to lose. Multi-position retractable slide to dial in...

Cut shingles with control and confidence. These heavy-duty, precision-ground hook blades bite in on the pull, giving you clean, guided cuts through asphalt shingles, felt, and underlayment with fewer slips and less edge wear. Each blade fits most standard utility knives for quick swaps on the roof or in the shop. Key Features Precision hook profile for secure pull-cuts and safer starts on shingles and felt. Heavy-duty steel construction for durability and long edge life. Universal fit:...

Drive square (Robertson) screws with authority. This 2" SQ2 power bit pairs a precision-machined square tip with a rugged, heat-treated S2 tool-steel core for tight, low cam-out engagement. The extended 2" length clears chuck jaws and fittings for better sightlines and control, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic bit holders—perfect for deck screws, cabinetry, fixtures, and general fastening. Key Features Precision SQ2 square tip for positive...

Stay sharp through tough cuts. These heavy-duty, precision-ground utility blades deliver clean, controlled slicing through roofing, drywall, flooring, cardboard, and plastics. Engineered for durability and consistent edge retention, each blade fits most standard utility knives for fast swaps and reliable performance on the jobsite or in the shop. Key Features Precision-ground cutting edges for smooth, accurate cuts. Heavy-duty steel construction for durability and long edge life. Universal...

Speed up bit changes and keep fasteners under control. This 3" magnetic bit holder locks standard 1" insert bits into place and uses a strong magnet to steady screws for a straighter, wobble-free drive. The 1/4" hex quick-change shank snaps into drills, impact drivers, and bit sleeves, while the 3" reach clears chucks and fittings for better sightlines in cabinetry, fixtures, and general assembly. Key Features Quick-change 1/4" hex shank for drills, impact drivers, and bit sleeves. Strong...

Built for everyday star-drive fastening, this 2" T20 power bit pairs a precision-machined Torx tip with a tough S2 tool-steel core for confident, low cam-out driving. The extended 2" reach clears chuck jaws and fittings to improve sightlines and control, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic bit holders for fast, accurate work in wood, metal, and plastics. Key Features Precision T20 Torx tip for positive engagement and reduced cam-out. Heat-treated...

Get extra reach without sacrificing control. This 2-3/4" SQ2 (Robertson #2) power bit combines a precision-machined square tip with a heat-treated S2 tool-steel core for tight, low cam-out engagement under high torque. The extended length improves sightlines past chucks and fittings, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic holders—perfect for deck screws, cabinetry installs, fixtures, and general construction. Key Features Precision SQ2 square tip for...

Built for heavy star-drive fasteners, this 2" T30 power bit pairs a precision-machined Torx tip with a rugged S2 tool-steel core for confident, low cam-out driving. The extended 2" reach clears chuck jaws and fittings while improving sightlines, and the 1/4" hex shank locks securely into drills, impact drivers, and magnetic bit holders for high-torque work on wood, metal, and machinery. Key Features Precision T30 Torx tip for positive engagement and reduced cam-out. Heat-treated S2 tool steel...

Move more material—faster and cleaner. This drill-powered 5-gallon mixer uses a heavy-duty steel shaft and a large, optimized paddle to lift from the bottom and fold from the sides, delivering a smooth, uniform blend with fewer bubbles and less splashing. Built for standard 5-gal buckets, it snaps into common drill chucks so you can power through paints, coatings, joint compound, adhesives, and sealants without slowing down. Key Features Large-capacity paddle engineered for rapid, uniform...

One handle, six everyday drivers. The Ivy Classic 6-in-1 packs the most-used Phillips, slotted, and nut-driver sizes into a compact, quick-change design. A rubberized triangular grip locks into your hand for slip-free torque and better control in tight spaces, while the reversible bits and hex sleeves swap in seconds so you can stay on task without hunting for tools. Key Features 6 tools in 1: Phillips, slotted, and two nut drivers in a single handle. Quick-change, reversible double-ended bits...

The IVY Classic Hand Rivet Tool is a manual rivet kit for fastening sheet metal, plastic, and leather. It includes four heads and a 60-piece aluminum rivet assortment, with long handles for added leverage during use. The tool has chrome molybdenum steel jaws, heavy-duty steel construction, vinyl grips, and a socket wrench stored in the handle. Key features: Includes hand rivet tool, four heads, and 60 aluminum rivets Used for joining sheet metal, plastic, and leather Long handles provide added...

Built for daily fastening, this 1" PH2 insert bit delivers a precise Phillips fit for tight, wobble-free driving. A durable steel body and optimized tip geometry reduce cam-out and wear, giving you consistent grip in wood, metal, and plastics with your drill or impact driver. Key Features Precision-cut PH2 tip seats cleanly to reduce cam-out and screw head damage. 1/4" hex insert shank fits standard bit holders, drills, and impact drivers. Heat-treated alloy steel for long wear and torque...

Blend paints, coatings, drywall mud, and adhesives fast and uniformly. This drill-powered 1-gallon mixer uses a durable steel shaft and an optimized paddle profile to pull material from the bottom up, cutting mix time while minimizing splashes and trapped air. It fits standard drill chucks for quick setup and cleans up easily, so you can move from batch to batch without slowing down. Key Features Rapid, uniform mixing for 1-gallon batches of paint, coatings, drywall compound, adhesives, and...

Tackle recessed Robertson screws with confidence. This 6" SQ2 power bit combines a precision-machined square tip with a rugged, heat-treated S2 tool-steel shaft for tight, low cam-out engagement under high torque. The long reach clears chucks, guards, and trim details for better sightlines and control, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic holders—perfect for deck screws, cabinetry installs, fixtures, and general construction. Key Features Long 6"...

Built for confident drive on larger hex fasteners, this compact 1" insert bit pairs a true 3/16" hex tip with a 1/4" hex shank for tight, wobble-free performance in drills and impact drivers. The heat-treated S2 steel body resists twisting under load, while the short length improves access and stability in tight spaces and magnetic holders. Key Features Precision-machined 3/16" hex tip for clean engagement and reduced rounding. Heat-treated S2 tool steel for high torque resistance and long...

Cut metal cleanly and keep moving. These 12" variable-pitch (10/14 TPI) bi-metal blades pair a flexible spring-steel back with a hard, wear-resistant high-speed steel edge to chew through pipe, conduit, sheet metal, and mixed materials without snapping or scorching. A universal shank slots into most reciprocating saws, and the longer length gives you reach and smoother strokes for faster, cooler cuts in the field. Key Features Variable 10/14 TPI tooth pattern balances speed, control, and...

Built for fast, straight, and dependable cuts, this reinforced 14" metal cut-off wheel powers through steel, rebar, angle iron, and pipe with clean kerfs and minimal burring. The 1/8" thickness balances cutting speed and wheel life, while the 20 mm arbor fits common chop saws and stationary cut-off machines for shop and jobsite reliability. Key Features Reinforced, fast-cutting abrasive for consistent, straight cuts in ferrous metals. 14" diameter with 1/8" kerf: strong balance of speed,...

Built for precise control on small Robertson screws, this 2" SQ1 power bit pairs a precision-machined square tip with a rugged, heat-treated S2 tool-steel core for tight, low cam-out engagement. The extended 2" length clears chuck jaws and fittings for better sightlines, and the 1/4" hex shank locks securely into drills, impact drivers, and magnetic bit holders—perfect for cabinetry hardware, fixtures, and light assemblies. Key Features Precision SQ1 square tip for positive engagement and...

Built for clean, precise star-drive fastening, this 2" T15 power bit pairs a precision-machined Torx tip with a tough S2 tool-steel core for confident, low cam-out driving. The extended 2" reach clears chuck jaws and tight fittings, improving sightlines and control, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic bit holders. Key Features Precision T15 Torx tip for positive engagement and reduced cam-out. Heat-treated S2 tool steel for high torque strength and...

Reach recessed star-drive screws with confidence. This 6" T20 power bit combines a precision-machined Torx tip with a rugged, heat-treated S2 tool-steel shaft for stable, low cam-out driving in hard-to-access locations. The extended length improves sightlines past chucks, guards, and fixtures, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic holders for clean, controlled fastening in wood, metal, and plastics. Key Features Long 6" reach clears obstructions and...

Get the reach you need without losing drive. This 5-1/2" self-feed bit extension uses a rugged 7/16" hex shank to deliver positive, slip-free torque transfer for large-diameter bores in framing, plumbing, and electrical runs. The secure, quick-engage interface keeps your self-feed or auger bit locked in, while the compact length threads through studs and joists for clean, straight holes with fewer setup changes. Key Features 5-1/2" extension adds reach for drilling through studs, plates, and...

Two go-to tips in one tough driver. This 2" double-ended bit pairs a Phillips #2 on one end with a Square #2 (Robertson) on the other, so you can flip and keep working as tasks change. The heat-treated S2 steel core handles high torque in drills and impact drivers, while the 1/4" hex shank locks into standard bit holders for wobble-free control on cabinetry, decking, fixtures, and general assembly. Key Features Dual-tip convenience: PH2 on one end, SQ2 on the other—switch fast, cut downtime....

Big leverage for the toughest cuts. This 24" hi-leverage bolt cutter pairs hardened, precision-ground jaws with a compound-action linkage to turn modest hand force into serious cutting power. Long handles with non-slip comfort grips boost control and reduce fatigue, while adjustable jaw screws let you fine-tune blade alignment for clean, consistent results on bolts, chain, locks, wire rope, and threaded rod. Key Features Compound-action mechanism multiplies hand force for effortless cutting....

Designed for high-torque star-drive screws, this 2" T27 power bit pairs a precision-machined Torx profile with a rugged S2 tool-steel core for confident, low cam-out driving. The extended 2" reach clears chucks and fittings, improving sightlines and control, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic bit holders—perfect for deck hardware, equipment, and heavy assemblies. Key Features Precision T27 Torx tip for positive engagement and reduced cam-out....

This reinforced 12" metal cut-off wheel delivers fast, straight cuts with a clean kerf on steel, rebar, angle iron, and pipe. The 1/8" thickness balances speed and wheel life, while the 20 mm arbor fits common chop saws and stationary cut-off machines for reliable shop and jobsite performance. Key Features Reinforced abrasive construction for consistent, straight cutting in ferrous metals. 12" diameter with 1/8" kerf for a strong mix of cutting speed, control, and durability. 20 mm arbor fits...

Engineered for heavy star-drive fasteners, this 2" T40 power bit combines a precision-machined Torx profile with a rugged, heat-treated S2 tool-steel core for confident, low cam-out driving. The extended 2" reach clears chuck jaws and fittings to improve sightlines and control, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic bit holders—perfect for deck hardware, equipment, and machinery assemblies. Key Features Precision T40 Torx tip for positive engagement...

Made for high-torque star-drive screws, this compact 1" T27 insert bit delivers a precise Torx fit that grips cleanly and stays planted under load. The heat-treated S2 steel core resists twisting in drills and impact drivers, while the short length boosts control and tight-space access—perfect for deck hardware, machinery, and heavy assemblies. Key Features Precision-machined T27 Torx tip for positive engagement and reduced cam-out. Heat-treated S2 tool steel for high torque strength and long...

Tackle recessed star-drive screws with confidence. This 6" T15 power bit combines a precision-machined Torx tip with a rugged, heat-treated S2 tool-steel shaft for stable, low cam-out driving in hard-to-reach spots. The extended length clears chucks, guards, and trim details for better sightlines and control, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic holders for fast, accurate work in cabinetry, fixtures, and light assemblies. Key Features Long 6" reach...

Get precise control on small Robertson screws—even in tight, recessed spots. This 2-3/4" SQ1 power bit pairs a precision-machined square tip with a heat-treated S2 tool-steel core for tight, low cam-out engagement. The extended length improves sightlines past chucks and guards, while the 1/4" hex shank locks securely into drills, impact drivers, and magnetic holders—perfect for cabinetry hardware, fixtures, and light assemblies. Key Features Precision SQ1 square tip for positive bite and...

Swap between heavy-duty Phillips and slotted screws without changing bits. This 2" double-ended driver pairs a PH3 on one end with an SL #8–10 on the other, delivering confident torque and low cam-out in drills and impact drivers. The heat-treated S2 tool-steel body shrugs off jobsite abuse, while the 1/4" hex shank locks into standard bit holders for steady, wobble-free control on structural screws, fixtures, and general construction. Key Features Dual-tip convenience: PH3 on one end, SL...

Built for big hex fasteners, this compact 1" insert bit pairs a true 1/4" hex tip with a 1/4" hex shank for tight, wobble-free driving in drills and impact drivers. The heat-treated S2 steel body resists twisting under heavy torque, while the short length improves stability and access in tight spots and magnetic bit sleeves. Key Features Precision-machined 1/4" hex tip for solid engagement and reduced rounding. Heat-treated S2 tool steel for high torque resistance and long service life. 1/4"...

One bit, two essential Phillips sizes. This 2" double-ended driver pairs PH1 on one end and PH2 on the other, so you can flip and keep working as fastener sizes change. The heat-treated S2 tool-steel body stands up to high torque in drills and impact drivers, while the 1/4" hex shank locks securely into standard bit holders for steady, low cam-out driving on cabinetry, fixtures, electronics, and general assembly. Key Features Dual-tip convenience: PH1 on one end, PH2 on the other—switch...

Built for big slotted fasteners, this 1" insert bit delivers a precise flat tip sized for #10–#12 screws. The heat-treated S2 steel body stands up to high torque from drills and impact drivers, while the compact insert length and 1/4" hex shank give you solid, wobble-free engagement—especially in magnetic bit holders and tight spaces. Key Features Precision flat tip matched to #10–#12 slotted screws for clean drive and reduced cam-out. Heat-treated S2 tool steel for strength, durability, and...

Built for high-torque star-drive fasteners, this compact 1" T20 insert bit delivers a precise Torx fit that bites cleanly and stays put under load. The heat-treated S2 steel body resists twisting in drills and impact drivers, while the short length gives you tight-space access and rock-solid control in magnetic bit holders. Key Features Precision-machined T20 Torx tip for positive engagement and reduced cam-out. Heat-treated S2 tool steel for high torque strength and long service life. 1/4"...

Built for everyday carry and jobsite utility, the Ivy Classic 11200 pairs a precision stainless blade with a textured Power Pro Grip® handle for locked-in control—even with gloves. A fast, one-hand opening mechanism gets you cutting in a snap, while the positive lock and low-profile pocket clip keep the knife secure and ready when you are. Key Features Precision stainless-steel blade for durable, reliable edge retention. Fast one-hand opening with positive blade lock for confident use. Power...

Compact power for clean cuts. This 14" hi-leverage bolt cutter combines hardened cutting jaws with a compound-action linkage to deliver strong cutting force in a portable size. Adjustable jaw screws keep the blades aligned for smooth, consistent performance, while textured comfort grips give you confident control on bolts, chain, and threaded rod. Key Features Compound-action mechanism multiplies hand force for easier cutting. Hardened alloy-steel jaws with precision-ground edges for clean,...

Built for jobsite muscle and shop precision, this 18" hi-leverage bolt cutter combines hardened cutting jaws with a compound-action linkage to turn modest hand force into clean, confident cuts. The balanced 18" length gives you portable power for bolts, chain, locks, wire rope, and threaded rod, while the adjustable jaw screws keep the blades aligned for smooth performance over time. Key Features Compound-action mechanism multiplies hand force for easier cutting. Hardened steel jaws with...

Built for precise hex fastening, this compact 1" insert bit pairs a true 1/8" hex tip with a 1/4" hex shank for tight, wobble-free drive in drills and impact drivers. The heat-treated S2 steel body resists twisting under load, while the short overall length improves access in tight spaces and magnetic bit holders. Key Features Precision-machined 1/8" hex tip for clean engagement and reduced rounding. Heat-treated S2 tool steel for high torque resistance and long service life. 1/4" hex insert...

Built for precise work on small hex fasteners, this compact 1" insert bit pairs a true 5/64" hex tip with a 1/4" hex shank for tight, wobble-free driving in drills and impact drivers. The heat-treated S2 steel body resists twisting under load, while the short length improves access in tight spaces and magnetic holders for clean, controlled fastening. Key Features Precision-machined 5/64" hex tip for accurate engagement and reduced rounding. Heat-treated S2 tool steel for high torque resistance...

Built for larger hex fasteners, this compact 1" insert bit pairs a true 7/32" hex tip with a 1/4" hex shank for tight, wobble-free driving in drills and impact drivers. The heat-treated S2 steel body handles high torque without twisting, while the short length boosts control and access in tight spaces and magnetic bit sleeves—perfect for machinery, fixtures, and heavy assemblies. Key Features Precision-machined 7/32" hex tip for positive engagement and reduced rounding. Heat-treated S2 tool...