Ivy Classic - Hex Insert Bit 1 in. x 5/64 in.

Built for precise work on small hex fasteners, this compact 1" insert bit pairs a true 5/64" hex tip with a 1/4" hex shank for tight, wobble-free driving in drills and impact drivers. The heat-treated S2 steel body resists twisting under load, while the short length improves access in tight spaces and magnetic holders for clean, controlled fastening.

Key Features

• Precision-machined 5/64" hex tip for accurate engagement and reduced rounding.
• Heat-treated S2 tool steel for high torque resistance and long service life.
• 1/4" hex insert shank fits standard bit holders, drills, and impact drivers.
• 1" compact length improves control and access in tight spots and magnetic sleeves.
• Wear-resistant finish helps fight rust and shop grime.
• Clearly marked size for quick identification in pouches and organizers.
• Ideal for small hex fasteners in electronics, fixtures, hardware, and light assemblies.

Brand / Model: Ivy Classic — Hex Insert Bit, 1" × 5/64"

Product Type: Hex screwdriver insert bit (power-drive)

Weight: ~0.2–0.4 oz (single bit; approximate)

Dimensions (Overall Length): 1.0 in (25 mm)

Tip Size / Drive: 5/64" hex (Allen)

Shank Size: 1/4" hex (6.35 mm) insert

Material: Heat-treated S2 tool steel

Finish / Coating: Wear-resistant black oxide (or similar) for corrosion protection

Hardness / Strength: Impact-driver compatible S2 (torque-rated; typical)

Fit / Geometry: Precision-machined hex tip for tight engagement and reduced rounding

Magnetics: Works with magnetic bit holders (bit itself non-magnetized unless noted)

Compatibility: Standard drill/drivers, impact drivers, and 1/4" hex bit holders

Primary Applications: Small hex fasteners in electronics, fixtures, hardware, and light assemblies (5/64" size)

Operating Notes: Seat fully in the fastener, apply firm in-line pressure, and replace if edges round over

Included: One 1" × 5/64" hex insert bit (holders sold separately)

Q: 1/4" shank—will it fit my drill or impact driver?
A: Yes. The 1/4" hex insert shank fits standard bit holders, drills, and most impact drivers.

Q: What fasteners is the 5/64" hex tip for?
A: Small hex/Allen fasteners commonly found in electronics, fixtures, and light hardware that specify a 5/64" key size.

Q: Is it impact-driver compatible?
A: Yes—heat-treated S2 tool steel handles impact use when you apply steady in-line pressure and avoid over-torquing.

Q: How do I prevent rounding the fastener?
A: Seat the tip fully, keep firm axial pressure, use the correct speed/torque, and replace the bit if the edges show wear.