EPDM Sealant Guide: Where Water Block and Lap Sealant Belong

| 0 comment(s)

EPDM Sealant Guide: Where Water Block and Lap Sealant Belong

Part 3 of our five-part Big Rock University series with H.B. Fuller

Our first and second installments explored why primer matters and how preparation and application come together when installing EPDM seam tape. In part three, we turn to termination details and the placement of two materials: water block and lap sealant.

Blake Lichthardt, Sales Professional for H.B. Fuller returns with a small termination mockup to demonstrate where each product belongs. By showing the materials within the assembly, Blake makes their different roles easier to understand.

Water Block Beneath the Membrane

Blake begins by applying a water block beneath the membrane, then positions a bar over the assembly to represent a termination bar. In the detail shown, the water block is concealed and compressed within the assembly.

He also identifies the area beneath a drain clamp as another location for a water block when required by the applicable detail. In both examples, understanding the product’s placement means looking beneath the exposed surface to see how the assembly comes together.

The mockup illustrates that placement. For an actual installation, the approved termination or drain detail determines the required materials and how they are applied.

Lap Sealant Along the Exposed Edge

Next, Blake applies lap sealant along the exposed termination edge.

With both products in place, the demonstration provides a clear comparison: water block sits beneath the membrane at the clamped detail, while lap sealant finishes the exposed edge shown in the mockup.

Although these materials may come in similar packaging, their placement and purpose need to be understood individually. Selecting a product means confirming its intended role and following the instructions for the specific assembly.

Preparation Carries Through Every Step

The demonstration also returns to a familiar theme from the first two installments: surface readiness.

When asked about the cleaner used earlier in the process, Blake confirms that it needs to dry before the next operation. That exchange reinforces why preparation remains part of the work as installers move from one application step to another.

Cleaning, priming, and applying the next material each require attention to surface conditions. Follow the current instructions for the cleaner, primer, sealants, and membrane involved to determine when the assembly is ready for the next step.

Seeing the Detail Come Together

This installment offers a useful opportunity to review material placement with your crew. Seeing water block beneath the membrane and lap sealant along the exposed edge helps connect each product to its location in the demonstrated assembly.

Watch the full Big Rock University video for a closer look at Blake’s mockup and explanation. Use the demonstration alongside the project’s approved details and current manufacturer instructions when reviewing installation requirements.

A Step-By-Step Visual Guide:

Continue Learning with Big Rock University

Thank you to Blake Lichthardt and H.B. Fuller for helping us bring practical product knowledge to our customers. Understanding where materials belong—and why their placement matters—is part of making that knowledge useful in the field.

Stay connected for the final two installments in our five-part Big Rock University series with H.B. Fuller. To explore the products behind these demonstrations, browse H.B. Fuller roofing solutions at Big Rock Supply or reach out to our team with your questions.



You must be logged in to post comments.