Equipment

GATOR DOUBLE ROOF CUTTER Our newest line up – Hydro-static Drive System Double Roof Cutter has twin blades powered by a 25 HP Kohler engine. This cutter has been tested by local roofing contractors with great success. Self-Propelled Double Twin Bladed Roof Cutter Kohler 23.5hp engine(747cc) with heavy-duty air filter providing more than twice the filtration area of the competitionHydro-static single lever drive systemWeight 595 lbsHeight 38″ Length 75″ width 35″ with a 25″ cutting width6″...

The 24" Control Flow Roller Frame CFRF-24 from Rooftop Equipment is a professional-grade system designed for large-scale spray-fed roof coating applications. It connects directly to a spray gun to feed coating material through dual dispensing heads to a 24-inch roller, eliminating overspray and improving efficiency. Built with a welded steel frame, durable dispensing system, and a 6-foot aluminum handle, this control flow assembly provides consistent, even coating coverage across wide roof...

For a highily mechanized crew using a hot tanker 350 Gallon Capacity (1,323L)Dual propane burners42-1/2" loading heightRecirculating SystemElectric Brakes9 hp Honda engine with reductionPumping kettle

OBPC3-SEALKIT is the official replacement pump seal kit for the OMG PaceCart 3 adhesive dispensing cart. It contains the set of critical seals, O-rings, gaskets, and retaining clips needed to restore pump performance, eliminate leaks, and maintain consistent adhesive delivery through the PaceCart 3 system. Using correct parts ensures longevity and reliable operation under jobsite conditions. Key Features set of all OEM seals, O-rings, gaskets, and clips for the pump of PaceCart 3 helps stop...

The 8" Control Flow Roller Frame CFRF-08 from Rooftop Equipment is engineered for precision roof coating applications using spray-fed technology. It connects directly to spray rigs, feeding coating material through dual dispensing heads to the roller surface without atomization. Built with a welded steel frame, durable dispensing system, and 6-foot aluminum handle, it ensures uniform coverage and eliminates overspray even in windy conditions. Key features: Key features: 8-inch control flow...

The Rooftop Equipment TS-40-WAX Superwide Tank Spreader Wheel Axle Assembly is a factory replacement part for 40-inch Superwide Tank Spreader systems. It supports wheel alignment and provides consistent mobility during coating and adhesive application. Built from corrosion-resistant metal, the TS-40-WAX offers strength, balance, and long-term durability for professional roofing applications. Designed for easy installation and smooth operation, it ensures reliable movement across large roof...

A 6” wide silicone belt designed for the TW 5000. Designed to help eliminate wrinkles and offer more welding stability.

This Vanguard-powered 14.0 Gross HP* unit is ideal for full-size landscapers, seal coaters, schools, parks departments, cemeteries, resorts, street departments, and golf or estate properties. With its high-performance capabilities, it incorporates advanced features such as patented Aim N Shoot technology, which directs airflow with fingertip control and locks into position for precise coverage. The innovative single-shot 16-blade fan delivers superior power with twice as many blades as...

High-quality metal toolbox made for automatic heat welding machines. Designed to protect and transport the BAK LarOn overlap welder robot. Key features: Metal construction for durability Fitment for BAK LarOn welder Protection during transport and storage Designed to safeguard the Welding machine

Gravel spreader attachment for workhorse power unit7.5 cu. ft.

The Winco WL16000HE is a high-output portable generator designed for demanding applications. Delivering 16,000 watts surge and 14,000 watts continuous, it is powered by a Honda iGX800 fuel-injected V-twin engine. Built with a heavy-duty wrap-around tubular steel cradle and equipped with YourGen metering, this generator combines power, safety, and durability. Key Features 16,000 watts surge / 14,000 watts continuous Honda iGX800 fuel-injected V-twin engine Wrap-around tubular steel cradle with...

The ACRO 70026 kettle skimmer is a professional-grade accessory featuring a 40″ steel handle attached to a 10″ × 12″ skimming blade—crafted for effective removal of debris from hot tar, asphalt, or bitumen kettles. Its long, sturdy handle ensures safe distance from heat, improving user control during operation. Engineered for durability with heavy-duty construction, the skimmer efficiently clears kettles to reduce fire risk and maintain material consistency across jobsites, providing a...

This is a 40 mm white rubber drive wheel intended as a replacement for automatic welding machines. It fits models made by BAK, Leister, Sievert, and other similar units. The rubber construction provides traction and durability during welding operations. Key features: 40 mm white drive wheel Rubber material Replacement for welding robots Compatible with BAK, Leister, Sievert, and similar Designed to restore drive performance on auto-welders ...

The SPA‑06SRTT1200 Trash Tray from SPAR‑Marathon is a rugged debris-handling accessory designed to safely load and lower materials like shingles, roofing debris, and construction waste. Built to SPAR‑Marathon’s standards for durability, this tray supports a 1,200 lb load capacity, includes hoisting cables for safe attachment, and its generous footprint makes it ideal for large-volume debris removal during roofing and clean-up operations.

The Lil' Donkey is a compact version of THE DONKEY, perfect for small to medium sized jobs, repairs, and specifically for the application of CAV-GRIP III to walls and other vertical roof surfaces. The LIL' Donkey holds up to 4 tanks simultaneously, carrying both 20 gallon & 80 gallon material tanks. This fully accessorized cart can also be used for two-part spray foam applications. Features: Spray wand holdersRetractable canister holding strapsRemovable hose rackGenerator mount (generator not...

PJR VEE AIR ONE Two-Part Spray Foam Adhesive Cart: The PJR-VEE AIR ONE is an inexpensive spray foam dispensing system on a patented customized cart that utilizes a custom OEM GRACO Reactor E15p, along with a Vee Air One Manifold applicator as key components. This high performance, lightweight spray foam system is easy to maneuver and easy to operate while being compatible with a variety of roofing systems. The PJR VEE AIR ONE is versatile enough for both 15 Gallon Drums & Bag In a Box and can...

GATOR ERASER The GATOR Tear-off Machine removes old flat roofs faster and cleaner than other methods. This Tear-off roof peeler is equipped with an 18 inch Dual-Action Cutting Blade (DACB) for better cutting with a slicing action. Unlike other tear-off equipment with a ramming action the Gator DACB Eraser slices as it cuts through even the toughest flat roofs quicker, leaving you with less to clean up. The Eraser has less vibration and pounding that is common with ramming-action equipment and...

The Tramex RIK5.1 Roof and Wall Inspector Kit is a complete moisture inspection system for evaluating roofing assemblies, wall systems, concrete decks and wood substrates. The kit includes the RWS Roof and Wall Scanner for deep non-destructive moisture detection up to approximately 4″ (100 mm), the CMEX II concrete moisture meter, a Hygro-i probe for ambient relative humidity measurements, and pin-probe accessories for wood and wallboard testing. All components are arranged in a rugged,...

The Guardian Fall Protection Universal Guardrail Post (61135) is a 65-inch steel post designed to provide enhanced fall protection where greater guardrail height is required. Taller than standard 42-inch and 52-inch posts, this 65-inch model offers additional coverage for unique jobsite conditions, making it ideal for commercial, industrial, and specialized residential applications. It is compatible with Guardian bases, gussets, and parapet clamps, and securely holds standard 2×4 or 2×6 lumber...

The OMG OB17GRAVHOSE is a clear Tygon gravity hose designed for use with OMG’s PaceCart2 and PaceCart3 adhesive dispensing carts. It allows adhesive to flow by gravity, helping maintain consistent application performance. The hose is built with chemical resistance in mind, and designed as a durable replacement part to keep the dispensing system reliable. Key Features replacement part for PaceCart2 and PaceCart3 carts clear Tygon construction for visibility of adhesive flow gravity-fed flow for...

The 16" Control Flow Roller Frame CFRF-16 from Rooftop Equipment is designed for professional roof coating applications requiring precision and efficiency. This control flow frame connects directly to spray rigs, delivering coating material through dual dispensing heads directly onto the roller surface. Built with a welded steel frame, aluminum handle, and 16-inch roller, the CFRF-16 eliminates overspray, reduces waste, and ensures uniform coating coverage even on large flat roof surfaces. Key...

The Powerblanket BH55-PRO is a high capacity, adjustable thermostat drum heater designed to handle 55-gallon steel or poly drums safely and precisely. With a full-wrap insulated blanket and Thermo Probe controller, it allows users to set desired temperature ramps up to around 160°F. Built tough, water-resistant, and certified to UL/CSA standards, this heater ensures steady heating while optimizing energy use. Key Features: Adjustable thermostatic controller for setting temperature from ambient...

The Powerblanket Lite PBLCAUW is designed to keep caulk tubes warm and ready to use in cold environments. This compact pouch holds up to five 10.1 oz caulk tubes, maintaining them at a preset temperature of approximately 70°F. By ensuring proper flow and consistency, it prevents application failures caused by stiff, cold caulk. Lightweight and portable, the unit plugs into any standard outlet and provides reliable freeze protection for job site or shop use. Key Features: Holds up to 5 caulk...

This flexible heater wrap is designed for 15-gallon pails used in bonding and adhesive applications. It offers an adjustable thermostat from 50° to 400 °F, and includes a 3″ reinforced silicone rubber band. It runs on 115 V at 300 W, fits approximately 11¼″ diameter pails with ±1″ tolerance, and includes a 6 ft cord with a molded 3-prong plug. Key Features: Thermostat adjusts 50° to 400 °F Reinforced 3″ silicone rubber band Operates at 115 V, 300 W Fits 11¼″ ± 1″ diameter pails 6 ft power cord...

The Dragin Wagon 7 Burner is a torch-wagon system designed for applying modified bitumen roofing. It delivers up to 1,200,000 BTU of heat for fast and consistent membrane application. The system includes precision valves and burner heads that support even flame distribution during operation. A 35-foot hose and regulator with P.O.L. adaptor are included for connection to vapor-phase LP gas. Key features: • High-output performance with 1,200,000 BTU capacity for rapid membrane application •...

DURACHUTE’s™ safety flap can be added, using the included bolts, washers and locknuts, to the hopper retainer bar. The flap stops debris from exiting the chute at intermediate intake locations. The flap comes pre-drilled with 3 bolts, washers and locknuts for quick and easy attachment to the hopper retainer bar. Add to Intake Hopper When Used in Intermediate Positions Includes Three (3) 5/16” Bolts, Three (3) Washers and Three (3) Locknuts Weight: 10 lbDims: 32 x 37 x 1 in  ...

Voltec vinyl temporary power cords are heavy duty 6/3–8/1 AWG cables designed for demanding temporary power applications. They remain flexible in extreme conditions ranging from -40°F to 140°F, ensuring reliable performance in varied environments. Available in 50 ft and 100 ft lengths, these cords deliver up to 50 amp service depending on the selected size. Key Features 6/3–8/1 AWG heavy duty temporary power cable Flexible from -40 to 140°F Two lengths available: 50 ft or 100 ft Rated up to 50...

The Powerblanket GCW40 Gas Cylinder Warmer delivers safe, uniform heat to keep 40 lb gas cylinders at optimal operating temperature. With an internal preset thermostat maintaining ~90°F (±10°F), it ensures consistent pressure and performance, even in freezing weather. Lightweight, portable, and easy to install, this warmer is ideal for commercial, industrial, and residential applications requiring dependable fuel flow. Key Features: Internal preset thermostat keeps cylinders at ~90°F (±10°F)...

The Van Mark TAG50 Trim-A-Gutter is a specialized bending system designed to create custom-fit gutter protection right on the jobsite. Built for professional contractors, this tool forms strong, accurate bends in gutter cover material so you can deliver clean, secure, and reliable gutter protection without relying on pre-fab pieces. With its rugged construction and easy-to-use setup, the Trim-A-Gutter helps you work faster, reduce waste, and maintain a consistent, professional finish on every...

The BS-CLMP is a clamp assembly replacement part for Rooftop Equipment’s Better Spreader line. It is used to hold rollers or frame components in position firmly and securely under operational stress. Constructed from durable materials, it ensures consistent alignment and reliable performance in commercial roof coating use. Key features: Precision clamp designed for Better Spreader systems Maintains firm grip under load and vibration Compatible with Rooftop Equipment spreader frames...

Classic Power Drives, long-time market favorites, provide reliable and durable performance in gas and electric models. Power DrivesPart NameWeightClassic Drive w/ 4 hp. B & S Gas Engine128 lbs.Classic Drive w/ 4 hp. Honda Gas Engine135 lbs.Classic Drive w/ 1 1⁄2 hp. Baldor Electric Motor154 lbs. Assembled to the 3rd and 5th track cross ties, they make the Platform Hoist safe and convenient for use on unlevel landscapes. The safe two handle design requires minimal effort and keeps the operator...

The Van Mark USA2EZ UniStandEZ is a rugged, purpose-built stand engineered to support Van Mark Metal Master brakes on the jobsite. Designed for fast setup and takedown, it gives contractors a stable, ergonomic platform for bending coil stock and trim all day long. Adjustable legs help you dial in a comfortable working height, while a balanced, open-frame design makes it easier to move the brake between the truck, shop, and jobsite without wrestling bulky sawhorses or makeshift supports. Key...

For decades, the RGC Classic Platform Hoist has been a customer favorite, known for quickly and efficiently lifting shingles and other materials to the roof. This powerful ladder hoist minimizes effort, reduces fatigue, and helps prevent injuries by safely transporting heavy materials with ease. Often referred to as a laddervator or tranzporter, RGC ladder lifts are designed for superior performance and quick assembly, allowing you to complete jobs faster and more effectively. Available in 200...

For very high production crews, this unit provides an extremely large capacity, without sacrificing heating efficiency. 793 Gallon Capacity (3,000 L) Dual propane burners Recirculating System Electric Brakes Tandem Axles After Burner Sold separately9 hp Honda Engine with reductionPumping kettle

The Van Mark USA2 UniStand is a heavy-duty, adjustable stand designed specifically to support Metal Master series brakes on the jobsite. Instead of balancing your brake on sawhorses or improvised supports, the UniStand gives you a solid, level base and a comfortable working height so you can focus on clean, accurate bends. Built from rugged, contractor-grade steel, it’s made to handle everyday loading, unloading, and bending work while staying easy to transport between jobs. Key Features...

The Felt Slitter RPC-242000 is designed to cut and re-roll roofing materials up to 40 inches wide. It features an improved safety-guard “open” design on the blade holder to reduce trapped debris. The machine uses a gear-reduction electric motor for reliable power and a laser-cut steel mandrel with hardened pins and grease fittings for durability and smooth roll release. A perforated bottom tray allows debris to pass through, and the higher frame design makes loading rolls easier on the...

This wheelbarrow features a 6 cubic foot capacity and is equipped with a flat-free tire to avoid punctures. It is intended for use on flat, level roofs only. The load limit for gravel is specified at 300 lbs when fully loaded. Key features: 6 cubic foot capacity Flat-free tire (no need for inflation) Designed for roof use on flat surfaces 300 lb gravel load limit OSHA safety warnings for roof edge and perimeter line ...

Heavy duty design with 9 HP overhead valve Honda engine Cuts 15 inch patch with 30 carbide tipped pins on 4 inch diameter solid steel drum Drum rotation provides self propulsion Adjustable cutting depth Easy access to drum assembly for maintenance through the top service door Safety splash guards for operator protection

The Tramex ME5 Moisture Encounter is a non-destructive moisture meter offering dual-depth measurement—shallow up to approximately 0.40″ (10 mm) and deep up to approximately 1.25″ (30 mm). It features five sensitivity ranges suited to wood & timber, drywall & roofing, plaster & tile, masonry and other building envelope materials. The unit uses a low-frequency electrical signal via base electrodes and displays results on an analog dial, making it suitable for locating, documenting and monitoring...

The Tramex RMK5.1 Roof Master Kit is a comprehensive field kit designed for roofing professionals engaged in moisture surveys of roofing membranes, insulation systems, concrete decks and wood decks. The system supports non-destructive scanning up to approximately 6″ (152 mm) in roofing assemblies, non-destructive moisture measurement in concrete, direct pin-probe wood moisture analysis and ambient humidity/dew point measurements. All components are supplied in a heavy-duty wheeled carry case...

The MB48B "Pan Style" Mini-Brake is engineered to fabricate drip pans, register boxes, and complex corners for flashing and fascia directly on the job site. Weighing just under 100 pounds (45 kg), it can be easily carried by two people or quickly separated into anvil and table components for transport by one person. The MB48B can be operated on a workbench, tailgate, or optional legs to produce 135° bends in 22-gauge (0.86 mm) galvanized steel with a maximum width of 48 inches (1.2 m). Its...

The Powerblanket GCW100 Gas Cylinder Warmer is designed to safely and efficiently heat 100 lb gas cylinders. With an internal preset thermostat, it maintains contents at approximately 90°F (±10°F), ensuring steady pressure and reliable performance in cold environments. Its lightweight and durable construction makes it ideal for job sites, construction, and industrial applications where consistent fuel supply is critical. Key Features: Preset thermostat keeps cylinders at about 90°F (±10°F)...

The Rooftop Equipment TS-27-RAX Doublewide Tank Spreader Roller Axle Assembly is a direct replacement part for 27-inch Doublewide Tank Spreader systems. This component supports the roller and ensures smooth, even rotation for consistent coating application. Made from corrosion-resistant metal, it provides reliable performance and long-lasting durability under demanding roofing conditions. Key features: Replacement roller axle for 27-inch Doublewide Tank Spreader systems Ensures balanced roller...

The Rooftop Equipment TS-14-RAX Singlewide Tank Spreader Roller Axle Assembly is designed as a direct replacement for 14-inch tank spreader systems. This component provides stable roller alignment and smooth rotation during coating application, maintaining consistent coverage across the roller width. Built from durable, corrosion-resistant materials, it restores performance and extends the service life of your spreader system. Key features: Replacement axle assembly for 14-inch Singlewide Tank...

Perfect for contractors and large property owners, the 305cc self-propelled blower helps you clear 30% more property per day. Patented Aim N Shoot™ lets you direct airflow with fingertip control, and it’s lockable for precision. The 16-blade fan and F10 smooth housing deliver powerful, quiet airflow that won’t rust or dent, backed by a 5-year warranty. With thicker padded handles for comfort and a lightweight design, you’ll work faster and more efficiently. Powered by a Vanguard® engine, it...

Rooftop Equipment Low Coverage Replacement Hand Rollers are designed for smooth, low-volume coating application on flat and low-slope roofing surfaces. Available in 4", 8", 16", and 24" widths, each roller features a ½-inch nap that provides precise coating control and reduced material usage. These rollers are compatible with all Rooftop Equipment standard hand roller frames and are ideal for touch-ups or thin coating applications. Key features: Available in 4", 8", 16", and 24" roller widths...

The Powerblanket EH0509 Extra Hot Ground Thawing Blanket provides reliable and efficient ground thawing in extreme cold conditions. Built with a preset thermostat and durable construction, this blanket delivers consistent heat across a 45-square-foot area. Its plug-and-play design ensures easy deployment on job sites, keeping construction, maintenance, and utility projects running on schedule during winter.Key Features: Preset internal thermostat at 150°F (±10°F) Provides 45 sq ft of thawing...

The SafeWaze Rope Assembly is designed for use with the SafeWaze Mounted Material Lift System, providing a durable, high-strength lifting line for safe material handling. Available in 30', 60', and 90' lengths, each rope is made from premium 7/16″ kernmantle construction for superior abrasion resistance and strength. The assemblies are cut to optimal lengths for a 2:1 mechanical advantage setup and include factory-prepared ends for secure attachment.