Albion DL-59-T27 Special Deluxe Manual Bulk Gun - 30 oz Teflon Barrel w/ Orange Cone Nozzles

The Albion DL-59-T27 Special Deluxe Manual Bulk Gun is a high-capacity 30 oz dispenser built for daily production with bulk sealants. Its Teflon barrel helps material release for easier cleanup, while the rotating 2-inch steel body improves bead orientation around corners and long runs. A heavy-duty 5/16-inch square drive rod with double grip plates delivers reliable force without slip, and dual oiled leather pistons plus a conical ejector generate strong suction for fast loading and smooth, uniform flow. The threaded front cap accepts the included orange cone nozzles for quick, trim-to-size bead control, making the DL-59-T27 a durable, jobsite-ready solution for professional sealing and bonding.

Key Features:

• Teflon barrel promotes release and faster cleanup between loads
• Rotating 2" steel barrel for precise bead orientation and access
• Heavy-duty 5/16" square drive rod with double grip plates for long service life
• Dual oiled leather pistons with conical ejector for strong suction and smooth flow
• Approx. 375 lbf thrust and ~120 psi equivalent output; includes orange cone nozzles

• Model/MPN: DL-59-T27
• Line/Type: Special Deluxe manual bulk-loading caulk gun
• Capacity: 30 oz bulk loads
• Barrel: 2" steel body with Teflon barrel; rotating; ~18" length
• Drive: Manual smooth-rod; 5/16" square rod; double grip plates
• Thrust / Pressure (approx.): 375 lbf / 120 psi equivalent
• Piston: Dual oiled leather with steel stiffener washers
• Nozzle Interface: Threaded front cap; accepts trim-to-size cone nozzles
• Typical Uses: Professional sealing and bonding with bulk materials
• Includes: (1) DL-59-T27 bulk gun; orange cone nozzles; threaded front cap; installed leather pistons and conical ejector

• Retract the rod and remove the front cap/nozzle; verify the conical ejector is installed.
• Bulk load: insert the barrel into the pail (or use a loading sleeve) and draw the rod to fill while keeping the outlet upright.
• Reinstall the threaded cap; fit an orange cone nozzle and snug securely.
• Prime: advance the rod until a steady stream forms; trim the cone to bead size and test on scrap.
• Dispense with a steady angle and travel speed; rotate the barrel to maintain orientation.
• Relieve pressure, remove excess material, and clean components before cure; the Teflon barrel helps release residue.

Q: What capacity does the DL-59-T27 handle?
A: 30 oz bulk loads in a rotating 2" steel body with a Teflon barrel.

Q: What advantage does the Teflon barrel provide?
A: It helps material release from the barrel for faster cleanup and reduced sticking.

Q: What nozzle style is included?
A: Trim-to-size orange cone nozzles that seat under the threaded front cap.

Q: How much force does it generate?
A: Approximately 375 lbf with about 120 psi equivalent output for consistent flow.

Q: What piston style is used?
A: Dual oiled leather pistons with stiffener washers for strong suction and smooth dispensing.