Super Anchor Safety 6014-72 - 72" Web Lanyard w/ 5005-Z SnapHook & Loop End

Built for everyday tie-offs, this 72-inch single-leg web lanyard pairs durable, high-tenacity webbing with a 5005-Z double-locking snaphook for fast, secure connections. The sewn loop end adds versatility for girth-hitching compatible anchor straps or connecting with a rated carabiner. Clear labeling and rugged stitching make inspections straightforward, keeping crews moving safely and efficiently.

Key features

• 72 in (6 ft) working length to reach common anchor points while minimizing slack.
• 5005-Z double-locking snaphook with 3,600 lb gate strength and secure, one-hand operation.
• Sewn loop end for girth-hitch to rated anchor straps or connection via rated carabiner.
• High-tenacity polyester webbing and heavy-duty stitching for abrasion and UV resistance.
• Compliance-minded design intended to meet OSHA requirements and applicable ANSI connector/lanyard standards when used as directed (verify exact standard/edition on the product label).
• Clear serial and inspection labeling to support pre-use and periodic checks.
• Compatible with full-body harness D-rings and approved anchors/connectors.
• Not for tie-back or leading-edge use; use in restraint or as part of a system that includes energy absorption per site requirements.

• Brand / Model: Super Anchor Safety 6014-72 Web Lanyard
• Part Number: 6014-72
• Product Type: Single-leg web lanyard (non–energy-absorbing), snaphook × sewn loop
• Weight: ~1.2–1.8 lb (assembly; typical—verify on label)
• Dimensions (Overall Length): 72 in (6 ft)
• Dimensions (Web Width): ~1.0 in (25 mm) typical
• Material: High-tenacity polyester webbing; polyester stitching; plated alloy-steel 5005-Z snaphook
• Ends / Connectors: 5005-Z double-locking steel snaphook on one end; sewn loop on the other
• Gate Opening (Snaphook): ~3/4–7/8 in (19–22 mm)
• Minimum Breaking Strength: 5,000 lb (22.2 kN) component MBS (web/connector)
• Gate Strength: 3,600 lb (16 kN)
• Proof Load: 3,600 lb (typical)
• Use Category: Restraint or positioning; for fall arrest, use only as part of a system that includes an approved energy absorber
• Max Free-Fall: 0 ft when used in restraint; follow site/label requirements for any fall-arrest configuration
• Inspection / Indicators: Check webbing, stitching, labels, and gate auto-lock before each use; remove from service if defects or after significant impact/drop
• Compliance: Designed to meet OSHA 1910/1926; conforms to applicable ANSI Z359.12 (connector) and ANSI Z359.13 (lanyard) when used as directed (verify edition)
• Compatibility: Full-body harness D-rings, rated anchor straps/points, and compatible connectors (avoid side loading and do not tie-back unless specifically rated)
• Included: 72" web lanyard with 5005-Z double-locking snaphook and sewn loop end

Q Question: What is this lanyard designed for—fall restraint or fall arrest?
A: It’s a non–energy-absorbing web lanyard intended for restraint/positioning. For fall arrest, use it only as part of a system that includes an approved energy absorber, and follow all label/manual limits.

Q Question: How do I connect the 5005-Z snaphook and the sewn loop?
A: Clip the double-locking snaphook to a compatible, rated D-ring or anchorage connector. Use the sewn loop to girth-hitch a rated anchor strap or connect via a rated carabiner, keeping proper orientation and avoiding side loading.

Q Question: Can I tie back to the lanyard or use it for leading-edge work?
A: No. Do not tie back to itself unless the product is specifically rated for tie-back (this model is not). It’s not for leading-edge applications; protect the webbing from sharp edges and use only smooth, compatible anchors.

Q Question: What inspections and care are required?
A: Before each use, check webbing, stitching, labels, and the snaphook’s auto-lock/snap-back. Remove from service if you find defects or after any significant impact/drop. Clean with mild soap and water, air-dry, and store dry away from UV and chemicals.