* Item does not qualify for free shipping terms *
Write a review!
#758 Aluminum Roof Coating is designed to provide
a reflective surface for roofs, metal buildings, and mo-
bile homes. Aluminum pigmented asphalt coatings can
substantially reduce interior building temperature and
prolong roof service life. #758 is a heavy-bodied, longer
lasting coating that will outlast thinner non-fibered
Lucas #758 Aluminum Roof Coating is formulated from specially refined asphalt, aromatic and aliphatic solvents, reinforcing non-asbestos fibers and 2 lbs. per gallon of leaf-
ing aluminum paste. Formulated to spread easily and evenly by brush or spray.
*Pricing does not include shipping
*FREE Shipping for orders of 72+ (2 pallets)
Surface to be coated must be dry and free of dirt or corrosion particles. Mechanically
mix coating thoroughly and continuously before and during application. Power mixing is
recommended. Apply evenly with a soft bristle brush or suitable spray equipment at the
rate of not less than one and not more than one and one-half gallons per 100 square feet.
For best results, brush coating in one direction with the slope of the roof. Do not apply
over fresh roof repairs or coating. Roofing asphalts should be allowed to cure thor-
oughly to avoid alligatoring and staining. As this condition is unpredictable, we recommend that the user apply a small amount of #758 to the area of the roof to be coated in
order to test its performance. Use #758 as it comes from the container, no thinning is
necessary with this product. Clean up with Lucas #125 Safe Solve™.
Combustible mixture, keep away from heat and open flames. Avoid prolonged contact with skin or fumes. If irritation occurs seek medical attention. Do not use near heat
or open flame. Keep out of reach of children. Read MSDS prior to use.
Applicable Specification: ASTM D-2824 Type III
Viscosity ASTM D-562: 625G @ 77°F (25°C)
Recommended rate of application: 1 to 1 1/2 gal. per 100 sq. ft.
% Asphalt: 30 min
% Solids: 48 min
% Non-volatile 52 max
Weight per gallon 8.1 lbs.
Aluminum Paste per gallon: 2 lbs.
% Initial: 60 min.
% Aged 3 Years: 50 min.
This product complies with the requirements of the Chicago Energy Code (Urban Heat
Flash Point (TCC): +100°F (38.7°C)
Container Sizes: 1, 5, 55
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!