Edge Rollers

Both narrow & wide variations of Malco Modular Metal Benders may be paired with a Bender Connector for a modular experience, allowing pros to customize or "freestyle" their set-up in a one or two station configuration. These connectors are used to connect any combination of 1 station benders (both the wide and the narrow benders).Setup: When using the connector with narrow benders, the tool may be assembled as shipped without additional steps. If the connector is used with a...

WUKO 5000 Combo Bender Roller Pairs Roll sets made of stainless steel and equipped with long-life bearings Interchangeable roll sets (customized rolls on demand) Roller Sets Available: Pair of Offsetting 45 Degree, 1/8" - 1005552Pair of Offsetting 45 Degree, 5/32" - 1005560Pair of Offsetting 90 Degree, 5/32" - 1005578Pair of Rollers for Beading  - 1005586 ...

Wuko Sheet Metal Bender Set  The Wuko Duo 3202 Bender (former 3200) features two bending wheels, specially designed for quick and easy bending of long, straight, sheet metal strips. Its function is equal to that of the WUKO Uni Bender, but it’s equipped with a second pair of bending rolls and a handle. It features two sets of rollers, making it an ideal bender for longer straight lines, like gutters or roof panels. The Wuko Bender 4000 is an ideal tool to create hems in long...

The handle for the bender allows the user to add additional leverage to the bender, or provide a more comfortable location for your second hand. Assembly:  Before attaching the handle, set up the bender so it is ready to bend the first piece. Loosen the handle by holding the barrel fastener against the machine bracket.Slide the handle assembly on to the shaft in an area that allows for comfortable hand placement while still allowing clearance.Tighten the handle in place and get to...

Save time on the job with Malco’s professional-grade 2-Station Metal Roofing Benders, which form 0°-100° bends on straight panels of any length on the jobsite, without waiting on wholesale roll formers. Why pick a 2-station model? Many trade pros prefer them over field brakes, as they can make infinite-length bends! Metal Roofing Benders by Malco are designed for 3/16″ – 13 3/4″ (5mm-350mm)-deep bends on roofing panel gable ends, flashing, custom roofing details, and standing seam panels where...

When you need to get the job done right and on time, you need professional-grade Metal Disc Benders by Malco, featuring removable discs for quick disassembly and mid-panel tool removal. Why choose a 1-station model? These tools are best for short bends and curves! Form 90°-180° bends to create hems and other details in any panel length on the jobsite, without waiting on wholesale roll formers. Metal Disc Benders by Malco are designed to form bends in a wide variety of materials for finishing...

When you need to get the job done right and on time, you need professional-grade Metal Disc Benders by Malco, featuring removable discs for quick disassembly and mid-panel tool removal. Why choose a 1-station model? These tools are best for short bends and curves! Form 90°-180° bends to create hems and other details in any panel length on the jobsite, without waiting on wholesale roll formers. Metal Disc Benders by Malco are designed to form bends in a wide variety of materials for finishing...

Professional-grade Metal Disc Benders by Malco are built tough to bend metal roofing panels right on the jobsite, and feature removable discs for quick disassembly and mid-panel tool removal. Why choose a 2-station model? Trust us, if you need to do continuous hems over 10′ long, you’re going to want a 2-station tool: the second station allows you to apply pressure to more of the panel while the additional width aids in tracking straight. Form 90°-180° bends to create hems and other details in...

Professional-grade Metal Disc Benders by Malco are built tough to bend metal roofing panels right on the jobsite, and feature removable discs for quick disassembly and mid-panel tool removal. Why choose a 2-station model? Trust us, if you need to do continuous hems over 10′ long, you’re going to want a 2-station tool: the second station allows you to apply pressure to more of the panel while the additional width aids in tracking straight. Form 90°-180° bends to create hems and other details in...

Save time on the job with Malco’s professional-grade 2-Station Metal Roofing Benders, which form 0°-100° bends on straight panels of any length on the jobsite, without waiting on wholesale roll formers. Why pick a 2-station model? Many trade pros prefer them over field brakes, as they can make infinite-length bends! Metal Roofing Benders by Malco are designed for 3/16″ 5 7/8″ (5mm-150mm)-deep bends on roofing panel gable ends, flashing, custom roofing details, and standing seam panels where...

Save time on the job with Malco’s professional-grade 2-Station Metal Roofing Benders, which form 0°-100° bends on straight panels of any length on the jobsite, without waiting on wholesale roll formers. Why pick a 2-station model? Many trade pros prefer them over field brakes, as they can make infinite-length bends! Metal Roofing Benders by Malco are designed for 3/16″ 7 7/8″ (5mm-200mm)-deep bends on roofing panel gable ends, flashing, custom roofing details, and standing seam panels where...

WUKO Bender Set 2204/4040 The ideal combination for bending/forming straight and curved pieces up to 90 degree and for bending from 90 degrees up to 180 degree - making a hem. Set Includes: Wuko Uni Bender 2204 Wuko Disc-O-Bender 4040 Twist Carrying Case Features: WUKO Uni Bender 2204 for Bending/Forming up to 90 degrees: Usable on large radius or straight panels, this bender is a true all-rounder! WUKO Dis-O-Bender 4040 Twist , Start at 90 degree and bends up to 180 degrees: No free space...