Chem Link Curb System for Penetration Seals
........creates a tough, 2-inch deep poured rubber seal. A curb is bonded to the roof surface (EPDM, PVC, BUR, coal tar, SBS mod bit, granulated APP, many types of coated metal, metal flashing details and FRP), creating a form for the rubber seal and protecting it from ice or mechanical damage.

Curb components are made of precast polyester structural urethane and can be configured to fit every shape and size of penetration.

M-1™, the bonding adhesive included in the ChemCurb System, is a tough, thermosetting adhesive capable of bonding steel deck to bar joists and metal sandwich panels to roof and wall purlins. M-1 develops 300 lbs. per square inch of shear strength on metal, masonry and wood. It is capable of 300% elongation and can accommodate dimensional changes in construction materials down to minus 20 degrees F, and is solvent free.

1-Part™ Pourable Sealer is a moisture-cure self-leveling high performance sealer applied with a 1-quart caulking gun. It's designed for use in warranted ChemCurb penetration seals, and can be used in non-warranted metal pitch pans. Available in Gray only.


Chem Link E-Curbs E-Curbs are environmentally friendly, as they are made with far less material than the original ChemCurb design. These latest version ChemCurbs may be flashed or not as the situation calls for.


Products 1-11 of 11
Show
ChemLink, #F1331 E-Curb 3 in. MiniCurb Kit
Designed to seal small penetrations such as HVAC Conduit, Drains & more. New...
Price: $219.95
Availability: In Stock
ChemLink Item #: CHE-F1331 -

    Green Roofing Solutions by Chem Link The MiniCurb™ was designed to seal small penetrations such as HVAC conduit and drains, exterior lighting supports, surveillance cameras, mounts for solar panels and light angle-iron struts. The MiniCurb is built with a special fiberglass reinforced nylon that is tough and durable. Its unique slip-fit components permit quick assembly around penetrations that can't be disturbed. MiniCurbs are installed with the same adhesive as the larger ChemCurbs® and a...

    ChemLink, #F1350GR E-Curb 6 in. MiniCurb Kit - Gray
    Designed to seal roof penetrations, Replaces old-style metal pitch pans, Installs in...
    Price: $156.00
    Availability: In Stock
    ChemLink Item #: CHE-F1350 -

      Green Roofing Solutions by Chem Link The MiniCurb™ was designed to seal small penetrations such as HVAC conduit and drains, exterior lighting supports, surveillance cameras, mounts for solar panels and light angle-iron struts. The MiniCurb is built with a special fiberglass reinforced nylon that is tough and durable. Its unique slip-fit components permit quick assembly around penetrations that can't be disturbed. MiniCurbs are installed with the same adhesive as the larger ChemCurbs® and a...

      ChemLink, #F1307P ChemCurb 5 in. 1-Part Kits
      Designed for Pipe Pentrations up to 4” in Diameter
      Price: $183.95
      Availability: In Stock
      ChemLink Item #: CHE-F1307P -

      Green Roofing Solutions by Chem Link ChemCurbs Replaces the old style metal pitch pans with versatile precast curb components, pourable sealant, and structural adhesive/sealant. The system can usually be installed in 15 min. and eliminates the need for flashing or mechanical attachment When installed properly, the ChemCurb system forms a durable waterproof rubber seal around penetrations of any size. An extended warranty against leaks is activated when chemlink products, LLC receives a...

      ChemLink, #F1302P ChemCurb 5 in. Rounds
      6 components per carton
      Price: $163.00
      Availability: In Stock
      ChemLink Item #: CHE-F1302P -

        ChemCurb precast form components are composed of gray polyester resin. The ChemCurb is 2-inches high and is available in a variety of shapes and sizes. Bisected circular curbs have an inside diameter of 7.5 or 5 inches. Straight pieces are available in 6 and 12 inch lengths and combined with 2-inch radius corners to create larger sizes. The outer surface is impervious to ice, corrosion, UV (ultraviolet) light, and ponding water. (Contains 6 curbs per carton only, no adhesive) ...

        ChemLink, #F1303P ChemCurb 12 in. Straights
        8 straights per carton
        Price: $133.95
        Availability: In Stock
        ChemLink Item #: CHE-F1303P -

          ChemCurb precast form components are composed of gray polyester resin. The ChemCurb is 2-inches high and is available in a variety of shapes and sizes. Bisected circular curbs have an inside diameter of 7.5 or 5 inches. Straight pieces are available in 6 and 12 inch lengths and combined with 2-inch radius corners to create larger sizes. The outer surface is impervious to ice, corrosion, UV (ultraviolet) light, and ponding water. (Contains 8 straights only, no adhesive) PRODUCT FEATURES RAPID...

          ChemLink, #F1351GR E-Curb 9 in. MiniCurb Kit - Gray
          Designed to seal roof penetrations, Replaces old-style metal pitch pans, Installs in...
          Price: $169.95
          Availability: In Stock
          ChemLink Item #: CHE-F1351 -

            Green Roofing Solutions by Chem Link The MiniCurb™ was designed to seal small penetrations such as HVAC conduit and drains, exterior lighting supports, surveillance cameras, mounts for solar panels and light angle-iron struts. The MiniCurb is built with a special fiberglass reinforced nylon that is tough and durable. Its unique slip-fit components permit quick assembly around penetrations that can't be disturbed. MiniCurbs are installed with the same adhesive as the larger ChemCurbs® and a...

            ChemLink, #F1301P ChemCurb 7.5 in. Rounds
            4 components per carton
            Price: $138.35
            Availability: In Stock
            ChemLink Item #: CHE-F1301P -

              ChemCurb precast form components are composed of gray polyester resin. The ChemCurb is 2-inches high and is available in a variety of shapes and sizes. Bisected circular curbs have an inside diameter of 7.5 or 5 inches. Straight pieces are available in 6 and 12 inch lengths and combined with 2-inch radius corners to create larger sizes. The outer surface is impervious to ice, corrosion, UV (ultraviolet) light, and ponding water. (Contains 4 curbs per carton only, no adhesive) ...

              ChemLink, #F1306P ChemCurb 7.5 in. 1-Part Kits
              Designed for Pipe Pentrations up to 5” in Diameter
              Price: $261.55
              Availability: In Stock
              ChemLink Item #: CHE-F1306P -

                Green Roofing Solutions by Chem Link ChemCurbs replaces the old style metal pitch pans with versatile precast curb components, pourable sealant, and structural adhesive/sealant. The system can usually be installed in 15 min. and eliminates the need for flashing or mechanical attachment When installed properly, the ChemCurb system forms a durable waterproof rubber seal around penetrations of any size. An extended warranty against leaks is activated when chemlink products, LLC receives a...

                ChemLink, #F1304P ChemCurb 6 in. Straights
                8 components per carton
                Price: $138.95
                Availability: In Stock
                ChemLink Item #: CHE-F1304P -

                  ChemCurb precast form components are composed of gray polyester resin. The ChemCurb is 2-inches high and is available in a variety of shapes and sizes. Bisected circular curbs have an inside diameter of 7.5 or 5 inches. Straight pieces are available in 6 and 12 inch lengths and combined with 2-inch radius corners to create larger sizes. The outer surface is impervious to ice, corrosion, UV (ultraviolet) light, and ponding water. (Contains 8 straights only, no adhesive) PRODUCT FEATURES RAPID...

                  ChemLink, #F1305P ChemCurb 2" Corners
                  8 Components per carton
                  Price: $139.95
                  Availability: In Stock
                  ChemLink Item #: CHE-F1305P -

                    ChemCurb precast form components are composed of gray polyester resin. The ChemCurb is 2-inches high and is available in a variety of shapes and sizes. Bisected circular curbs have an inside diameter of 7.5 or 5 inches. Straight pieces are available in 6 and 12 inch lengths and combined with 2-inch radius corners to create larger sizes. The outer surface is impervious to ice, corrosion, UV (ultraviolet) light, and ponding water. (Contains 8 corners only, no adhesive) PRODUCT FEATURES RAPID...

                    New!
                    Chemlink #1363GR 4.5”x 3.5” Rectangle E-Curb Kit
                    Chemlink #1363GR 4.5”x 3.5” Rectangle E-Curb Kit
                    Price: $160.15
                    Availability: In Stock
                    ChemLink Item #: CHE-F1363GR -

                      E-Curbs seal penetrations by using a plastic mold and a pour-in-place polymer seal. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing), and are specified for PVC, PIB, and TPO single-ply roofing membranes. The service temperature range for the E-Curbs is -40 F to 200 F, but should not be applied at temperatures below 32 F. This rectangular E-Curb was specifically designed to work with SnapNrack one-hole standoff kits and the SnapNrack HD...

                      Best Sellers

                      ChemLink, #F1350GR E-Curb 6 in. MiniCurb Kit - Gray
                      Designed to seal roof penetrations, Replaces old-style metal pitch pans, Installs in...
                      Price: $156.00

                      Green Roofing Solutions by Chem Link The MiniCurb™ was designed to seal small penetrations such as HVAC conduit and drains, exterior lighting supports, surveillance cameras, mounts for solar panels and light angle-iron struts. The MiniCurb is built with a special fiberglass reinforced nylon that is tough and durable. Its unique slip-fit components permit quick assembly around penetrations that can't be disturbed. MiniCurbs are installed with the same adhesive as the larger ChemCurbs® and a...

                      ChemLink, #F1331 E-Curb 3 in. MiniCurb Kit
                      Designed to seal small penetrations such as HVAC Conduit, Drains & more. New...
                      Price: $219.95

                      Green Roofing Solutions by Chem Link The MiniCurb™ was designed to seal small penetrations such as HVAC conduit and drains, exterior lighting supports, surveillance cameras, mounts for solar panels and light angle-iron struts. The MiniCurb is built with a special fiberglass reinforced nylon that is tough and durable. Its unique slip-fit components permit quick assembly around penetrations that can't be disturbed. MiniCurbs are installed with the same adhesive as the larger ChemCurbs® and a...

                      ChemLink, #F1301P ChemCurb 7.5 in. Rounds
                      4 components per carton
                      Price: $138.35

                      ChemCurb precast form components are composed of gray polyester resin. The ChemCurb is 2-inches high and is available in a variety of shapes and sizes. Bisected circular curbs have an inside diameter of 7.5 or 5 inches. Straight pieces are available in 6 and 12 inch lengths and combined with 2-inch radius corners to create larger sizes. The outer surface is impervious to ice, corrosion, UV (ultraviolet) light, and ponding water. (Contains 4 curbs per carton only, no adhesive) ...

                      ChemLink, #F1307P ChemCurb 5 in. 1-Part Kits
                      Designed for Pipe Pentrations up to 4” in Diameter
                      Price: $183.95

                      Green Roofing Solutions by Chem Link ChemCurbs Replaces the old style metal pitch pans with versatile precast curb components, pourable sealant, and structural adhesive/sealant. The system can usually be installed in 15 min. and eliminates the need for flashing or mechanical attachment When installed properly, the ChemCurb system forms a durable waterproof rubber seal around penetrations of any size. An extended warranty against leaks is activated when chemlink products, LLC receives a...

                      Leave a message