Your cart is empty!
The Flame Engineering Red Dragon 567RD is a high-pressure adjustable propane gas regulator designed for use with roofing torches, tar pot heaters, weed burners, and other high-demand applications. It delivers precise pressure control from 0 to 100 PSI, making it suitable for a wide range of jobsite conditions. This regulator is built for cylinder systems using either liquid or vapor LP gas and features a compact, medium-capacity design with consistent regulating performance. It includes a...
The Flame Engineering Red Dragon M7273 is a wrench-tighten M.O.P. fitting designed for use with liquid propane torch systems. It provides a secure connection point for high-demand liquid fuel applications where a more rigid, tool-tightened seal is preferred. This fitting is used in roofing torch setups that operate on liquid propane, offering a more vibration-resistant connection compared to hand-tight fittings. It is commonly selected as a replacement for standard M.O.P. fittings when a...
The Flame Engineering Red Dragon V-334 is a heavy-duty needle valve used to control propane flow in roofing torch and heating equipment. It features a compact, all-brass construction for durability in demanding job site conditions. This valve is commonly used in torch setups and repair assemblies where precise flame adjustment is required. The integrated thumb wheel allows for controlled gas flow, helping operators fine-tune flame output during use. Key Features All-brass construction for...
The Flame Engineering Red Dragon F-322 is a hex coupling used to connect two 1/4" female pipe thread (FPT) components in gas, air, oil, or water systems. It provides a straight-through connection point for extending or joining threaded fittings. This coupling is commonly used in propane torch assemblies and related equipment where matching female-threaded components need to be connected inline. The hex body allows for wrench tightening during installation. Key Features 1/4" FPT x 1/4" FPT...
By customer request we are offering a new wagon similar to a competitor’s model. The older style two handle design modernized by Red Dragon technology. Features include a stainless steel manifold and framework and 7 durable vapor torches. Each torch has a flame adjusting needle valve for total flame control and the manifold easily moves to and from the roll. Lighter weight than the competition and American made. Manifold easily moves to and from the roll. Apply 3/4, 1, 1-1/2 square rolls. For...
The Flame Engineering Red Dragon Valve Repair Kits and Lever Assembly are replacement components designed for use with the V-880P squeeze valve. These kits allow users to service specific parts of the valve instead of replacing the entire assembly. Available options include repair kits for the pilot valve, main valve, and the lever assembly, giving crews the ability to restore function to worn or damaged components in the field. Key Features Designed for V-880P squeeze valve repairOptions...
The Flame Engineering Red Dragon V-880P/H-1 is a squeeze valve and handle kit designed to add on-demand flame control to compatible vapor torch systems. It features a high-pressure brass valve with an integrated adjustable pilot, allowing the operator to maintain a low flame between uses and activate full output only when needed. This kit is used in roofing and torch applications where intermittent flame control is required. The squeeze lever design helps reduce continuous fuel flow, while the...
The Red Dragon 7" Spud Bar Replacement Blade is a bolt-on replacement designed to restore cutting performance on compatible spud bars. It replaces worn or damaged blades to maintain effective material removal during roofing tear-off work. This blade is used on spud bars for removing built-up roofing, gravel, and adhered materials from roof surfaces. Its replaceable design allows crews to swap blades in the field and keep tools in service without replacing the entire bar. Key Features 7" wide...
The Flame Engineering Red Dragon RT 2-1/2-20 C is a field torch kit designed for stand-up roofing applications. It delivers up to 400,000 BTU of heat output and is used for applying modified bitumen membranes and other torch-down materials. The kit includes a complete torch assembly with hose, regulator, and accessories needed for operation. Its 29" torch length and 2.5" bell are configured for controlled flame application while allowing the operator to work in an upright position. Key...
The Ultra‑Safe Red Dragon RD‑HN30‑SRL is a 30‑foot Class 2 galvanized steel cable self‑retracting lifeline, meeting ANSI Z359.14‑2021 standards. Designed for demanding fall-protection applications in construction, roofing, and industrial maintenance, the RD‑HN30‑SRL delivers smooth retractability, extended reach, and maximum durability. Its compact, impact-resistant housing and speed‑sensitive braking system ensure consistent safety performance while significantly reducing untethered slack and...
The Ultra‑Safe Red Dragon RD‑HN50‑SRL is a heavy‑duty, 50‑foot Class 2 galvanized steel cable self‑retracting lifeline engineered for extreme-reaching fall protection needs. Built to ANSI Z359.14‑2021 standards, it features impact-resistant housing, a speed‑sensitive braking system, and load-indicating connectors. Ideal for construction, high‑rise maintenance, utility, and industrial work, it delivers smooth retractability and robust fall protection over extended reach while minimizing slack...
The Dragin Wagon 7 Burner is a torch-wagon system designed for applying modified bitumen roofing. It delivers up to 1,200,000 BTU of heat for fast and consistent membrane application. The system includes precision valves and burner heads that support even flame distribution during operation. A 35-foot hose and regulator with P.O.L. adaptor are included for connection to vapor-phase LP gas. Key features: • High-output performance with 1,200,000 BTU capacity for rapid membrane application •...
The Ultra-Safe Red Dragon RD-HN20-SRL is a 20-foot Class 2 wire self-retracting lifeline engineered for demanding fall protection applications. Built with a galvanized steel cable and housed in a durable thermoplastic casing, it meets ANSI Z359.14-2021 standards for safety and performance. Ideal for construction, roofing, and industrial maintenance, the RD-HN20-SRL provides smooth retractability, reduced fall clearance, and high strength for peace of mind on elevated job sites. ...