S-5-FA Flanged Mini Clamp

The S-5! FA (Flange Adapter) is an accessory that converts an existing S-5! mini clamp into a flanged clamp. It attaches with an M8 bolt to most mini clamps and provides a slotted flange for mounting utilities, rails, or other attachments. The flange is curved for structural stiffness, allowing attachment at various angles around the clamp. Hardware such as flange nuts or bolts for utility mounting are sold separately.

Key Features:

• Adapts virtually any S-5! mini clamp (except brass) into a flanged clamp

• Provides 360° rotational placement flexibility around the clamp

• Slotted flange hole allows adjustability when aligning utility mountings

• Curved flange design adds rigidity and strength

• Ideal for module electronics, rails, walkways, and mounting utilities

• Compatible clamps: All S-5! mini clamps except brass models
• Attachment: Attaches via M8 bolt to mini clamp
• Flange hole: Slotted for adjustability
• Orientation: Flange adaptor can be oriented freely around the clamp (360°)
• Weight: approximately 1.12 oz per FA unit
• Dimensions: approximately 1″ × 1″ × 3″
• Includes: One FA Flanged Mini Clamp adaptor (hardware for utility mounting not included)

• Select the S-5! mini clamp you wish to convert to flanged type.
• Position the FA adapter over the clamp so its slotted flange faces the desired mounting angle.
• Insert and tighten an M8 bolt to attach the FA adapter to the mini clamp.
• Align the flange slot to match the bolt pattern of the utility or component to mount.
• Attach the utility hardware (bolt and flange nut) through the slotted flange hole.
• Ensure all hardware is tightened and clamp/adaptor orientation is stable.

Q: Can I use the FA adapter with any S-5! clamp?
A: It works with all S-5! mini clamps except the brass clamp models.

Q: Does the FA adapter include mounting hardware for utilities?
A: No. The FA includes only the adaptor; bolts and nuts for the utility attachment are sold separately.

Q: How much flexibility in orientation does FA provide?
A: It allows full 360° rotational placement around the clamp.

Q: What are the dimensions and weight of the FA Flanged Mini Clamp adaptor?
A: Approximately 1″ × 1″ × 3″ in size, weighing about 1.12 oz.