RACE Rail Skylight Safety Kit - Extension Pack

The RACE Rail Skylight Safety Kit Extension Pack enhances the standard guardrail kit to support skylights up to 4′ × 8′. It includes a bundle of four steel extension rails and four matching L-bolts. This adjustable extension allows two sides of the original kit to expand, enabling protection of larger skylight areas.

Key features:

• Extends standard skylight safety kit to 4′ × 8′ coverage
• Bundle includes 4 extension rails
• Comes with 4 L-bolts for secure fastening
• Adjustable to fit larger skylights
• Lightweight steel construction for durability

• Kit contents: 4 extension rails + 4 L-bolts
• Maximum skylight size supported: 4′ × 8′
• Material: Steel (extension rails)
• Designed to supplement two sides of the standard kit

• Ensure the existing guardrail frame is clean, aligned, and all original fasteners are properly seated.
• Unbolt one side of the existing kit frame where the extension is to be added.
• Insert one of the extension rails into the frame slot on the unbolted side.
• Secure the extension rail using one of the included L-bolts and tighten until flush and stable.
• Repeat the process on the opposite side if full 4′ × 8′ coverage is required.
• Once both extension rails are installed, verify the overall frame alignment and then tighten all fasteners on the original kit and the extension to lock the system in place.

Q: Can the extension pack be used if I don’t have the original kit frame?
A: No. The extension pack is designed to supplement the original frame of the skylight guardrail kit and cannot stand alone.

Q: What is the maximum skylight size supported when using the extension pack?
A: When installed, the system supports skylights up to 4 feet by 8 feet.

Q: Are additional corner posts required when using the extension rails?
A: No. The extension pack uses the existing corner posts of the original kit and adds only rails and L-bolts to expand two sides.

Q: Is the steel material of the extension rails compatible with all roof surfaces?
A: Yes. The steel extension rails are designed to integrate with the original kit’s mounting and are suitable for standard flat or low-slope roof surfaces when installed correctly.