Keson Ultra-Mark Paint 16 oz.

Lay down bright, durable layout lines that crews can read at a glance. Keson Ultra-Mark 16 oz delivers high-opacity color with fast dry times and a clean, controlled spray—ideal for construction layout, utility locates, landscaping, and striping prep on concrete, asphalt, soil, and turf. Use by hand or pair with a standard marking wand for walk-and-spray efficiency.

Features

• High-opacity, fast-dry formula: Crisp, readable lines that set up quickly to reduce smears and delays.
• Outdoor tough: Weather-resistant marks that stand up to sun and light moisture on active jobsites.
• Inverted can design: Works by hand or with common marking wands/handles for ergonomic, continuous lines.
• Clean spray pattern: Fan/line output for sharp edges with minimal overspray on pavement, dirt, or turf.
• Clog-resistant valve: Consistent flow from start to finish; easy purge after use.
• Multi-surface performance: Concrete, asphalt, compacted soil, gravel, and short turf.
• APWA color options: Available in common utility colors (availability varies).

• Brand/Series: Keson Ultra-Mark
• Product Type: Inverted marking paint (aerosol)
• Can Size (Each): 16 oz can (net fill typically 12–14 oz, varies by color)
• Colors: Common APWA/utility colors (e.g., White, Yellow, Red, Blue, Green, Orange; availability varies)
• Finish/Opacity: High-opacity, matte finish for readable marks
• Dry Time: Touch-dry ~5–10 min; handle ~20–30 min (temperature/humidity dependent)
• Full Cure: ~24 hours (conditions dependent)
• Spray Pattern: Inverted fan/line for crisp edges; low-overspray formulation
• Valve/Nozzle: Clog-resistant valve; compatible with standard marking wands/handles
• Application Methods: By hand (inverted) or with most common marking wands/handles
• Recommended Surfaces: Concrete, asphalt, compacted soil, gravel, short turf
• Weather Resistance: Designed for outdoor durability (sun, light moisture, traffic)
• Coverage (Per Can): ~180–300 ft of 2" line (surface/technique dependent)
• Recoat Window: Anytime after tack-free; best adhesion within 1–2 hours
• Operating Temp (Surface/Can): ~40°F to 110°F (4°C to 43°C); store warm in cold weather for best flow
• Clean-Up (Uncured): Appropriate solvent (per SDS/color)
• Package Options: Single cans; cartons by color available
• Storage: Store upright, cool & dry; protect from heat/freezing; keep cap on
• VOC/Compliance: Industrial/architectural aerosol category (check local regulations/SDS)
• Safety Notes: Flammable aerosol. Use outdoors or with ventilation; avoid sparks/flames; PPE recommended; consult color-specific SDS
• Typical Applications: Construction layout, utility locates, landscaping marks, survey notes, line striping prep
• MPN: Varies by color (16 oz)

Q: What surfaces does the 16 oz Ultra-Mark work on, and are the marks weather-resistant?
A: Concrete, asphalt, compacted soil, gravel, and short turf. A: Marks are formulated for outdoor durability, resisting sun and light moisture once dry.

Q: How fast does it dry, and when can I recoat?
A: Touch-dry in ~5–10 minutes, handle in ~20–30 minutes, and full cure in ~24 hours (conditions dependent). You can recoat anytime after tack-free; best adhesion within 1–2 hours.

Q: What coverage can I expect from a single can?
A: Roughly ~180–300 ft of 2" line per can, depending on surface texture, speed, and spray technique.

Q: Can I use it with a marking wand/handle and how do I avoid clogs?
A: Yes—this inverted can is compatible with standard marking wands/handles. Shake well, keep the nozzle clean, and purge briefly after use to help prevent clogs.