Best Price Guaranteed
Price: $40.00
    Item #441-0320
    Write a review!


    • Used with Flat Roof Outrigger & Roof Parapet Outrigger
    • See DuraChute Manual for more information
    • Shipping (and Use) Weight = 50lbs.

    Additional Information

    CHUTES International DURACHUTE system is the choice system for roofers, scaffolding, general contractors, and construction companies. The blow-molding process makes a more resilient chute than any other on the market. The upper and lower rings add extra stability, so that the system maintains its shape regardless of length of system and the larger 32” diameter makes for efficient and effective debris removal.

    • Each section is approximately 4’ tall with 3’ 1” of usable chute length
    • Sections weigh 37 lbs (chains included)
    • Heat-Treated, Proof Tested Galvanized Chains
    • Top opening of 32” tapers to 27”

    CHUTES also offers the economical DURAFLAT Flat Plastic Trash Chutes. The DURAFLAT trash chutes are designed for the contractor, store flat, and can be assembled quickly with hand tools.

    If you want a complete trash chute system, start with the intake hopper (#0301) and basic support frame (#0310). The intake hopper and basic support frame are required for all outrigger options. You then need to choose the best outrigger for your application. Parapet wall or window (#0311), flat roof (#0314), pitched roof (#0316), or scaffolding (#0312)? They also make a safety frame (#0315) for additional security on the job site. CHUTES International has almost every application covered!

    There are other accessories as well - intermediate intake hoppers (#0305), dust gaiters (#0330) to control debris particles, protective liners (#0303) for protection from heavy debris, picking bars (#0323), and winches.

    For additional information and an installation guide, please look through the CHUTES International DURACHUTE Installation Manual or contact us.


    Other Resources

    The following counterweight table is given for reference purposes only and is not to be taken as a guideline. Each job is to be figured individually based upon its own specific conditions (number of hoppers, number of protective liners, etc.). The following table is based on a system with one top hopper intake, outrigger, basic support frame, and a safety frame:

    Chute Length Up To |

     Minimum # Of 50 Lbs Counter Weight

    50’ = 17 sections | 

    10 Counterweights

    80’ = 27 sections |

    14 Counterweights

    100’ = 34 sections |

    18 Counterweights

    120’ = 40 sections |

    20 Counterweights

    150’ = 50 sections |

    24 Counterweights

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!