Roofing Tear-off

This flat section is an inexpensive alternative to molded chute sections. While durability and length of life are short, when lightweight construction and short use is needed, these flat chutes are a economical alternative. Each section comes with chains, bolts, flat washers and nuts. Ensures that your debris lands where you want it to Light weight, high density polyethylene is weather proof and extremely durable for years of trouble free use. Stores and ships flat, then easily assembled using...

As the industry leader in trash chutes, CHUTES International provides top quality, blow-molded polyethylene trash chutes. CHUTES International chutes are tried and tested to be more durable than others on the market to ensure a safer work site. Less debris on the site means less chance of injury. Stronger chutes minimize downtime, damage to property and possible injury. Our chutes outlast any other chutes in its class, making them a better investment - far less expensive in the long run!...

DURACHUTE’s™ plastic debris chute intake (or top) hoppers allow access at the top of the chute system. They easily install with the rest of the plastic chute system for easy access to the chute. The large 29″ x 28″ allows sizable debris passage into the trash chute. This chute hopper is generally used for roof, window or slab access. Features: Total chute length 4′Useable length 3’1″Inside diameter (top) 32″Tapers to 28″ bottomTop intake hopper for DuraChute SystemTotal Length 4'29"W x 28"H...

The Window/Parapet Outrigger is used, in conjunction with the Basic Support Frame, to hang chute systems either through window openings or from parapet roofs. The minimum window opening size in which the hanger will fit is 38″ (please call CHUTES for adjustable outriggers in the event your opening is smaller). The maximum sill depth is 30″. CHUTES highly recommends the use of 2″ x 4″ softeners (i.e. wooden boards), but they are not provided. Used for Window or Parapet Mounting Minimum Window...

Required with all DURACHUTE™ Plastic Debris Chute Outriggers, the Basic Support Frame comes complete with a set of hopper stands, 2 hair pin clips, 2 flat washers, picking chains, latch pins, and breakaway cable with caution tag for guide rope attachment.The Basic Support Frame attaches to any of the DURACHUTE™ Outriggers (Hangers) and is used to attach the debris chute system to the outrigger. Each frame comes equipped with hopper stands, allowing for an easy addition of a top hopper. Basic...

RACE Roof Cutter: Precision and Power with Shock Absorber Technology The RACE Roof Cutter is a powerful and dependable tool designed for roofing professionals. With a 13 HP Honda Engine, shock absorber, and easy maintenance features, it ensures precision and efficiency. Whether you’re an experienced roofer or a newcomer, the RACE Roof Cutter delivers top-tier performance for all your roofing projects. Features: Dependable Performance: The 13 HP Honda Engine ensures reliable power for any...

Welded steel hopper stands up to punishment and provides 42” x 42” depository (shipping weight 200 lbs.)

DURACHUTE’s™ plastic debris chute intermediate hoppers easily install throughout the debris chute system. By using the simple-to-adjust chains, these hoppers can be conveniently placed to allow access to the chute at each floor and window opening. The large 29″ x 28″ allows sizable debris passage into the trash chute. The Hopper Retainer Bar and Safety Flap allow the stacking and installation of sections on top of this hopper while providing the additional safety feature of a plastic flap to...

Light weight and equipped with 5.5 HP Honda GX160 engine Ideal for cutting jobs around tight and hard to reach areas such as air conditioners and vents Will fit under objects at least 16" above roof surfaceMakes close cuts to skylights, parapets, etc. 12 inch blade with two carbide tipped cutters for longer blade life Shipping weight 155#

Heavy duty construction pays special attention to detail, performance, reliability and minimum maintenance Standard 12" carbide blade included Adjustable cutting depth control handle

This versatile machine is designed to accept different attachments such as a gravel bucket, dumper tray or 55 gal. hot tank. Equipped with balloon tires on a wide wheel base Powered by a 5.5hp Honda engine. The wheels and gears are direct chain drive equipped with a brake. Brake automatically engages for safety whenever the operator’s hand leaves the control.

Heavy duty design with 11 HP overhead valve Honda engine Adjustable cutting depth Equipped with heavy duty flanged block bearings for longer machine life Cuts 14 inch path with 4 carbide tipped cutters mounted on solid steel circular plate Cuts close to walls, gravel stops, roof edges, etc. Safety splash guards for operator protection

Has a 36" wide poly-steel brush w/convenient 3-position control for brush angles that is spring-loaded with gates for positive positioning of brush from straight to right or left. Floating power brush design assures positive bristle contact with all surfaces for more efficient cleaning and longer brush life. Interlinked power controls automatically disengage whenever the operator’s hands are removed from the handle. Honda 5.5 HP engine. Instruction Manual ...

DURACHUTE’s manual winch, used with the Scaffold Outrigger, safely and easily lifts and lowers the DURACHUTE debris chute system for installs and dismantling. The winch comes complete with frame, winch, cable and picking bar, inserts into the Basic Support Frame, and is available in two lengths: 80′ and 150′. Complete System Includes All Components (Frame, Winch, Picking Bar) 80' Cable 80' Winch's Shipping Weight = 74 lbs. ...

REPLACEMENT PART for the winch picking bar for all DURACHUTE™ winches. For use when a DURACHUTE Winch is not being used 4,000 lbs. Maximum Load Weight: 13 lbs.Dims: 33 x 4 x 1 in

Designed for hauling and unloading debris. Workhorse attachments can easily be changed over in minutes.

Counterweights are used with DURACHUTE’s™ Flat Roof/Slab Outrigger and the “No Touch” Parapet/Roof/Window Outrigger. The newly redesigned counterweight is formed with easy hand holds on either side. Please refer to CHUTES’ Counterweight Table to compute number of counterweights required for your applicable use. Used with Flat Roof Outrigger & Roof Parapet Outrigger Weight: 50lbs.Dims: 18 x 20 x 4 in

The Flat Roof/Slab Outrigger is used when hanging a debris chute from a flat roof application. This hanger uses counterweights (not included) to offset the weight of the chute. Please see the counterweight table to compute number of counterweights needed.The Outrigger Includes: Used for Flat Roof or Slab Mounting Two (2) Front 6' Square Tubes w/ Clamps Two (2) Back 6' Square Tubes w/ Clamps Two (2) 90-Degree Clamps Two (2) Outserts Two (2) Kicker-Stubs Two (2) Counterweight Stubs Four (4) 1/2"...

The DURACHUTE™ Safety Frame is used in conjunction with the Flat Roof/Slab Outrigger to ensure fall protection for those using the top hopper of the debris chute system. This piece is needed only if safety frames are not already provided on site. The safety frame is 4′ high and 8′ long and includes an intermediate horizontal bar for additional safety. Mounting clamps are included to attach to the DURACHUTE™ Flat Roof/Slab Outrigger. Used with Flat Roof Outrigger Mounting 4' High x 8' Long...

Protective Liners are clipped to the inside of plastic debris chute sections and add an additional layer of thickness to the section, which extends the life of the chute section itself. It is used when particular heavy debris may be thrown, when there may be slight bends in the chute system which creates a specific area of impact, or if sharp-edged objects may be disposed down the chute. The protective liners are made of the same high quality. HDPE plastic material as our sections and come...

DURACHUTE’s manual winch, used with the Scaffold Outrigger, safely and easily lifts and lowers the DURACHUTE debris chute system for installs and dismantling. The winch comes complete with frame, winch, cable and picking bar, inserts into the Basic Support Frame, and is available in two lengths: 80′ and 150′. Features:  Complete System Includes All Compenents (Frame, Winch, Picking Bar)150' Cable150' Winch's Shipping Weight = 210 lbs.Load Rating: 1,900 lbs.  ...

Heavy duty design with 5.5 HP overhead valve Honda engine Cuts 4-1/2 inch path with 8 carbide tipped pins on 4 inch diameter solid steel drum Easy access to drum assembly for maintenance through the safety cover Adjustable cutting depth Ideal for repair work around gravel stops, expansion joints, and flashing Drum rotation provides self propulsion Safety splash guards for operator protection ...

Hopper retainer bars are added to the intake hopper when used in intermediate positions. The retainer bar allows other sections to sleeve into the intake hopper safely. The galvanized bar comes complete with four 5/16″ bolts, washers and locknuts. Add to Intake Hopper When Used in Intermediate Positions Includes Four (4) 5/16” Bolts, Four (4) Washers and Four (4) Locknuts Weight: 2 lb. Dims: 21 x 32 x 1 in ...

The patented DURAFLAT™ Converter is used to attach the DURAFLAT™ Flat Chute Sections to any of DURACHUTE’s™ outriggers via the Basic Support Frame. The converter comes complete with all necessary chains, hooks, nuts and bolts. It is 36″ in diameter.Converts the two chain attachment from the Intake Hopper to a three chain attachment for use with the plastic folding chutes.Weight: 46 lb.Dims: 36 x 36 x 5 in

Features: Come complete with operator safety fence Easy to set up; provides a safe holding system for trash hopper and chutesComes complete with 12 counterweights Hopper and trash chute sections are not included and are sold separately Maximum number of trash chutes allowed for the system: 16 Sections * Hopper and Trash Chutes Sold Separately *

To ensure the DURACHUTE™ Debris chute system can be used in any application, the Pitched Roof Outrigger can be used for pitched roof chute hanging application. Used for Pitched Roof MountingTwo (2) 8' Round Tubes Two (2) 4' Diagonal Braces Four (4) Roof Tube Brackets Two (2) 90-Degree Clamps 1/4" Safety Tie-Back Plate 5/8" Shackle 50' of Aircraft Cable Six (6) 3/8" Cable Clamps Weight 115 lb.Dims: 69 x 9 x 3 in ...

When job site conditions require containment of dust particles due to building occupancy or confined areas, DURACHUTE’s™ Dust Gaiters provide additional debris containment. Dust gaiters simply slip on, between chute sections, to stop small dust and other particles from escaping from between the sections. Used to Help Contain Dust Particles in Confined Areas and Occupied Buildings Fits Between Sections Weight: 1 lbs. ...

DURACHUTE’s™ safety flap can be added, using the included bolts, washers and locknuts, to the hopper retainer bar. The flap stops debris from exiting the chute at intermediate intake locations. The flap comes pre-drilled with 3 bolts, washers and locknuts for quick and easy attachment to the hopper retainer bar. Add to Intake Hopper When Used in Intermediate Positions Includes Three (3) 5/16” Bolts, Three (3) Washers and Three (3) Locknuts Weight: 10 lbDims: 32 x 37 x 1 in  ...

The Scaffold Outrigger is used, in conjunction with the Basic Support Frame, to hang chute systems onto scaffolding. The mounting system consists of four 8’ round tubes, six 90-degree clamps, four swivel clamps and weighs approximately 92 pounds. Used for Scaffold Mounting Four (4) 8' Round Tubes Six (6) 90-Degree Clamps Four (4) Swivel Clamps Weight 132 lb.Dims: 96 x 2 x 96 in ...

Gravel spreader attachment for workhorse power unit7.5 cu. ft.

Hydraulic Roof PeelerHeavy duty design with 11hp electric start Honda engineHydraulic drive for variable speed forward and reverseOscillating and adjustable blade, ready to tear any type of roofEasy blade changesHinged cover allows for easy access to all components for maintenanceAir-filled TiresReliabilityHeavy gauge steel fabricatedSolid steel welded frameAdvanced hydraulic system provides minimum on-site breakdownsProductivityScrape and remove material in a single passSlice right through...

Heavy duty design with 9 HP overhead valve Honda engine Cuts 15 inch patch with 30 carbide tipped pins on 4 inch diameter solid steel drum Drum rotation provides self propulsion Adjustable cutting depth Easy access to drum assembly for maintenance through the top service door Safety splash guards for operator protection

Features: Latest Hydrostatic Transaxle No Hydraulic Hoses or Tank Easy Access for Field Maintenance Heavy Duty Frame Industrial Precision Bearings and Camshaft with 4 Port Grease Block Adjustable Blade Made of Hardened Special Alloy Steel 11HP Honda Electric Start Engine Low Center of Gravity at 584 lbs Instruction Manual ...

DURACHUTE’s™ new In-House Manual Winch adds an additional level of safety, reducing chute installers need to reach ”out of house” to grasp the winch crank when raising or lowering the chute. Safe and easy to both assemble and use, the manual winch easily installs the DURACHUTE™ debris chute system. Available in both 150′ and 80′ lengths.The winch consists of winch roller bar, winch frame, winch, support arm, winch picking bar, five 5/8″ bolts and 2 frame support brackets with caps.Winch Roller...

DURACHUTE’s™ new In-House Manual Winch adds an additional level of safety, reducing chute installers need to reach ”out of house” to grasp the winch crank when raising or lowering the chute. Safe and easy to both assemble and use, the manual winch easily installs the DURACHUTE™ debris chute system. Available in both 150′ and 80′ lengths.The winch consists of winch roller bar, winch frame, winch, support arm, winch picking bar, five 5/8″ bolts and 2 frame support brackets with caps.Winch Roller...