Package Quantity: 500 per box
Price: $176.85
Item #OMG-XHD005B
Write a review!
Description
The OMG XHD005B is a 5-inch #15 Extra Heavy Duty roofing fastener designed to secure insulation and membrane to light gauge steel, OSB, plywood, and aluminum decks. It features oversized shank and thread diameters for maximum pull-out strength. Deep buttress threads reduce back-out, while the miniature drill point provides quick penetration. The CR-10 coating delivers superior corrosion resistance.
Key Features:
-
Oversized shank and thread diameters improve pull-out resistance
-
Deep buttress thread profile minimizes pull-out and back-out
-
Miniature drill point ensures fast deck penetration
-
#3 Phillips truss head compatible with screw guns
-
CR-10 corrosion-resistant coating with FM and Miami-Dade approvals
Specifications
- SKU / Model: XHD005B
-
Thread diameter: 0.265 in (6.73 mm)
-
Shank diameter: 0.202 in (5.13 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 13 threads per inch (full thread)
-
Point type: miniature drill point
-
Coating: CR-10 corrosion-resistant coating (FM 4470 and EAD 030351-00-0402 compliant)
-
Length: 5 in (127 mm)
-
Weight per box: ~41 lbs (18.6 kg)
How To
- Determine fastener length by combining insulation thickness, membrane thickness, and embedment requirement.
-
Drill a pilot hole if required for deck type.
-
Position fastener perpendicular to deck surface with plate if used.
-
Drive with a #3 Phillips bit until flush; a slight depression around the plate should be visible without overdriving.
-
Check that insulation boards and plates remain level and secure.
-
Conduct field pull tests to verify anchor performance.
FAQs
Q: What substrates are suitable for XHD005B?
A: It is approved for light gauge steel (20 GA and lighter), OSB, plywood, and aluminum decks.
Q: How many fasteners are included per box?
A: 1,000 per box.
Q: Does XHD005B meet FM and Miami-Dade requirements?
A: Yes, it is FM approved and Miami-Dade accepted.
Q: What embedment depths are required?
A: At least ¾ in through steel or aluminum, ¾ in through OSB/plywood underside, and 1 in minimum into wood plank.
Q: What corrosion protection is used?
A: The fastener is finished with CR-10 coating for enhanced corrosion resistance.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!