Package Quantity: 1,000 per box
Price: $234.73
Item #OMG-XHD003B
Write a review!
Description
The OMG XHD003B is a 3-inch #15 Extra Heavy Duty roofing fastener designed for maximum performance in light gauge steel, OSB, plywood, and aluminum decks. Its oversized shank and thread diameters improve pull-out resistance, while deep buttress threads reduce back-out. A miniature drill point ensures quick penetration and the CR-10 coating protects against corrosion.
Key Features:
-
Oversized heavy shank and thread diameters for superior pull-out resistance
-
Deep buttress thread design for pull-out and back-out resistance
-
Miniature drill point for efficient penetration into substrates
-
#3 Phillips truss head for secure driving with screw guns
-
CR-10 corrosion-resistant coating, FM and Miami-Dade approved
Specifications
- SKU / Model: XHD003B
-
Thread diameter: 0.265 in (6.73 mm)
-
Shank diameter: 0.202 in (5.13 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 13 threads per inch (full thread version)
-
Point type: miniature drill point
-
Coating: CR-10 corrosion-resistant coating (FM 4470 and EAD 030351-00-0402 compliant)
-
Length: 3 in (75 mm)
-
Weight per box: ~27 lbs (12.25 kg)
How To
- Select the correct fastener length based on insulation and membrane thickness plus embedment requirement.
-
Drill a pilot hole if necessary, depending on deck conditions.
-
Position the fastener perpendicular to the deck with a pressure plate if used.
-
Drive the fastener using a #3 Phillips bit until the head seats flush and a slight depression forms around the plate; avoid overdriving.
-
Verify that plates and insulation are flat and secured.
-
Perform field pull tests to confirm anchorage strength.
FAQs
Q: What deck types are suitable for XHD003B?
A: It is suitable for light gauge steel (20 GA and lighter), OSB, plywood, and aluminum decks.
Q: How many fasteners are included per box?
A: 1,000 per box.
Q: Does the XHD003B meet FM and Miami-Dade standards?
A: Yes, it is FM approved and Miami-Dade accepted.
Q: What embedment is required for proper installation?
A: At least ¾ in through steel or aluminum flute, ¾ in through OSB/plywood underside, and at least 1 in into wood plank.
Q: What corrosion protection does XHD003B have?
A: It features CR-10 corrosion-resistant coating, designed to minimize red rust and meet industry requirements.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!