Package Quantity: 125 per box
Price: $422.03
Item #OMG-XHD022
Write a review!
Description
The OMG XHD022 is a 22-inch #15 Extra Heavy Duty roofing fastener designed for securing ultra-thick insulation and membrane systems into light gauge steel, OSB, plywood, and aluminum decks. It features oversized shank and thread diameters for superior pull-out resistance, deep buttress threads to reduce pull-out and back-out, and a miniature drill point for quick penetration. The CR-10 coating ensures excellent corrosion resistance.
Key Features:
-
Oversized shank and threads deliver superior pull-out resistance
-
Deep buttress thread design helps prevent pull-out and back-out
-
Miniature drill point ensures fast penetration into substrates
-
#3 Phillips truss head for reliable screw gun installation
-
CR-10 corrosion-resistant coating, FM and Miami-Dade approved
Specifications
- SKU / Model: XHD022
-
Thread diameter: 0.265 in (6.73 mm)
-
Shank diameter: 0.202 in (5.13 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 13 threads per inch (full thread)
-
Point type: miniature drill point
-
Coating: CR-10 corrosion-resistant coating (FM 4470 and EAD 030351-00-0402 compliant)
-
Length: 22 in (559 mm)
-
Weight per box: ~42 lbs (19 kg)
How To
- Select fastener length according to insulation and membrane thickness plus embedment requirement.
-
Drill a pilot hole if necessary depending on deck type.
-
Place fastener perpendicular to the deck with plate if used.
-
Drive using a #3 Phillips bit until flush with a slight depression; avoid overdriving.
-
Ensure insulation boards and plates are flat and properly secured.
-
Perform pull tests to confirm field anchorage performance.
FAQs
Q: What substrates can XHD022 be installed in?
A: It is approved for light gauge steel (20 GA and lighter), OSB, plywood, and aluminum decks.
Q: How many fasteners are included in a box of XHD022?
A: 250 fasteners per box.
Q: Is XHD022 FM and Miami-Dade approved?
A: Yes, the fastener is FM approved and Miami-Dade accepted.
Q: What embedment depths are required?
A: Minimum ¾ in through steel or aluminum flute, ¾ in through OSB/plywood underside, and 1 in into wood plank.
Q: What corrosion protection is applied to XHD022?
A: It uses the CR-10 corrosion-resistant coating for long-term durability.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!