Package Quantity: 250 per box
Price: $435.46
Item #OMG-XHD014
Write a review!
Description
The OMG XHD014 is a 14-inch #15 Extra Heavy Duty roofing fastener engineered for securing thick roofing assemblies into light gauge steel, OSB, plywood, or aluminum decks. Its oversized shank and thread diameters maximize pull-out resistance, while deep buttress threads reduce pull-out and back-out. The miniature drill point ensures quick penetration, and the CR-10 coating provides superior corrosion protection.
Key Features:
-
Oversized shank and threads provide maximum pull-out strength
-
Deep buttress thread design minimizes pull-out and back-out
-
Miniature drill point ensures rapid penetration into decks
-
#3 Phillips truss head compatible with screw guns
-
CR-10 corrosion-resistant coating, FM and Miami-Dade approved
Specifications
- SKU / Model: XHD014
-
Thread diameter: 0.265 in (6.73 mm)
-
Shank diameter: 0.202 in (5.13 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 13 threads per inch (full thread)
-
Point type: miniature drill point
-
Coating: CR-10 corrosion-resistant coating (FM 4470 and EAD 030351-00-0402 compliant)
-
Length: 14 in (356 mm)
-
Weight per box: ~56 lbs (25.4 kg)
How To
- Select fastener length according to insulation and membrane thickness plus required embedment.
-
Drill a pilot hole if necessary for the substrate type.
-
Place the fastener perpendicular to the deck with plate if required.
-
Drive using a #3 Phillips bit until head is flush and a slight depression forms; avoid overdriving.
-
Confirm insulation boards and plates are level and secure.
-
Conduct pull tests to ensure proper anchorage in field conditions.
FAQs
Q: What substrates can XHD014 be used in?
A: Light gauge steel (20 GA and lighter), OSB, plywood, and aluminum decks.
Q: How many fasteners are packaged per box?
A: 500 fasteners per box.
Q: Does XHD014 meet FM and Miami-Dade approvals?
A: Yes, it is FM approved and Miami-Dade accepted.
Q: What embedment depths are required?
A: At least ¾ in through steel or aluminum flute, ¾ in through OSB/plywood underside, and 1 in into wood plank.
Q: What corrosion protection is applied?
A: CR-10 corrosion-resistant coating for long-term protection against rust.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!