Package Quantity: 500 per box
Price: $782.42
Item #OMG-XHD012B
Write a review!
Description
The OMG XHD012B is a 12-inch #15 Extra Heavy Duty roofing fastener designed for thick roof assemblies including insulation and membranes attached to light gauge steel, OSB, plywood, or aluminum decks. Its oversized shank and thread diameters maximize pull-out strength. Deep buttress threads reduce back-out risk, while the miniature drill point ensures quick substrate penetration. The CR-10 coating delivers long-term corrosion resistance.
Key Features:
-
Oversized shank and threads provide maximum pull-out strength
-
Deep buttress thread profile helps resist pull-out and back-out
-
Miniature drill point for fast penetration into decks
-
#3 Phillips truss head for secure screw gun compatibility
-
CR-10 corrosion-resistant coating, FM and Miami-Dade approved
Specifications
- SKU / Model: XHD012B
-
Thread diameter: 0.265 in (6.73 mm)
-
Shank diameter: 0.202 in (5.13 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 13 threads per inch (full thread)
-
Point type: miniature drill point
-
Coating: CR-10 corrosion-resistant coating (FM 4470 and EAD 030351-00-0402 compliant)
-
Length: 12 in (305 mm)
-
Weight per box: ~48 lbs (21.8 kg)
How To
- Determine fastener length by adding insulation and membrane thickness plus required embedment.
-
Drill a pilot hole if necessary depending on substrate type.
-
Place the fastener perpendicular to the deck with plate if required.
-
Drive the fastener using a #3 Phillips bit until flush and a slight depression forms; avoid overdriving.
-
Ensure insulation and plates remain level and secure.
-
Conduct pull tests in representative locations to validate anchorage.
FAQs
Q: What substrates can XHD012B be used in?
A: Light gauge steel (20 GA and lighter), OSB, plywood, and aluminum decks.
Q: How many fasteners are included per box of XHD012B?
A: 500 per box.
Q: Is XHD012B FM and Miami-Dade approved?
A: Yes, it is both FM approved and Miami-Dade accepted.
Q: What embedment depths are required?
A: Minimum ¾ in through steel or aluminum flute, ¾ in through OSB/plywood underside, and 1 in into wood plank.
Q: What coating is used on XHD012B?
A: CR-10 corrosion-resistant coating for enhanced rust protection.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!