Package Quantity: 1,000 per box
Price: $239.01
Item #OMG-RGDP006B
Write a review!
Description
The OMG RGDP006B is a 6" #12 Standard RoofGrip Drill Point fastener intended to secure insulation and membrane systems to steel decks (18-24 ga) and approved wood decks. It employs deep buttress threads to resist pull-out. Its drill point tip allows penetration even in retrofit scenarios, while the CR-10 coating provides corrosion protection.
Key Features:
-
Deep buttress threads enhance pull-out resistance
-
Sharp drill point enables efficient penetration, even through membranes
-
#3 Phillips truss head for compatibility with screw guns
-
CR-10 corrosion-resistant coating that meets industry standards
-
FM and Miami-Dade approved in qualifying roof assemblies
Specifications
- SKU / Model: RGDP006B
-
Thread diameter: 0.220 in (5.58 mm)
-
Shank diameter: 0.160 in (4.06 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 12.5 threads per inch (buttress thread)
-
Point type: Drill point (full thread)
-
Coating: CR-10 corrosion-resistant coating (meets FM 4470 standards)
-
Length: 6 in (150 mm)
-
Threaded length: 4 in (102 mm)
-
Weight per box: 42 lbs
How To
- Determine total fastener length (insulation + membrane + embedment).
-
Align the fastener perpendicular to the deck and use a screw gun with a #3 Phillips bit.
-
Drive until a slight depression appears around the plate or insulation; do not overdrive.
-
Ensure the plate does not spin and the fastener is tight without stripping.
-
In rigid cover board installations, control torque to avoid damaging the deck.
-
Perform pull tests to confirm anchorage in representative field conditions.
FAQs
Q: What deck types does RGDP006B support?
A: It is designed for steel decks (18–24 gauge) and approved wood decks.
Q: What embedment depths are required?
A: Minimum embedment: ¾ in into steel flutes; 1 in into wood where applicable.
Q: Is RGDP006B FM and Miami-Dade approved?
A: Yes, it is approved in qualifying roof assemblies.
Q: What corrosion protection is applied?
A: The fastener uses CR-10 coating.
Q: Can RGDP006B be used for retrofit (overlay) projects?
A: Yes, the drill-point tip enables penetration through existing membranes and insulation.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!