US Aluminum - Ultra Flo - Regular Hole - 4 ft Gutter Protection - Black Finish

Keep gutters moving and maintenance low. Ultra Flo Regular Hole uses a classic perforation pattern on a rigid, low-profile black panel to block leaves and larger debris while maintaining strong water throughput. Each 4-ft section tucks under the shingle edge and fastens to the front lip for a crisp, curb-clean look on standard K-style systems. Built to handle heat, cold, and heavy rain, it’s a durable, corrosion-resistant upgrade that helps prevent clogs, overflows, and fascia staining.

Features

• Regular-hole perforation: Proven pattern sheds leaves and debris while preserving high flow.
  
• Low-profile, rigid panel: Sleek black finish blends with trim and resists sag across long runs.
  
• 4-ft sections: Faster layout, fewer seams, easy handling on ladders and lifts.
  
• Slide-under install: Rear edge under shingle/drip edge; front secures to gutter lip or fascia with exterior-rated fasteners.
  
• K-style compatibility: Sized options available to match common K-style systems.
  
• All-weather durability: Corrosion-resistant construction with UV and temperature tolerance.
  
• Maintenance reducer: Quick seasonal brush/blow-off; helps keep downspouts clear and flow consistent.
  
• Pro-friendly: Works with standard outlets, elbows, and common exterior screws/rivets.

• Brand/Model: US Aluminum Ultra Flo Regular Hole
• Product Type: Perforated “regular-hole” gutter guard panel (under-shingle, front-lip fasten)
• Material: Rigid metal panel with classic regular-hole pattern; exterior, corrosion-resistant black finish

Dimensions & Weight (Each Panel)

• Length: 48 in (4 ft)
• Width (5" systems): ~6.0–6.5 in (typical)
• Width (6" systems): ~7.5–8.0 in (typical)
• Width (7" systems): ~8.5–9.5 in (typical)
• Thickness: ~0.019–0.024 in (typical gutter-grade)
• Weight (5" panel): ~0.9–1.2 lb (approx.)
• Weight (6" panel): ~1.1–1.5 lb (approx.)
• Weight (7" panel): ~1.3–1.8 lb (approx.)

Finish/Color

• Factory black, low-gloss; paint touch-up compatible

Compatibility & Performance

• Gutter Size/Type: 5", 6", and 7" K-style systems (select matching width)
• Perforation Pattern: Regular-hole layout to shed leaves/twigs while maintaining high water throughput
• Operating Environment: Exterior, all-weather; UV and temperature resistant

Installation & Use

• Method: Rear edge slides under shingle/drip edge; front fastens to gutter lip or fascia
• Fasteners: Exterior-rated screws or rivets (not always included; match metals for corrosion compatibility)
• Coverage: 4 linear feet per panel
• Maintenance: Seasonal inspection; brush/blow off surface debris; keep downspouts and outlets clear

Packaging

• Unit of sale: Individual 4-ft panels (bundle/carton counts vary by distributor)

Notes/Standards

• Verify roof-edge details (drip edge, starter course) and local code before install; ensure proper gutter pitch and adequate downspout capacity for peak performance.

Q: Will these panels fit my gutter system?
A: Yes. They’re available in widths for standard 5", 6", and 7" K-style gutters. On specialty roof edges/drip edges, verify clearances before install.

Q: Do the regular holes let too much debris through?
A: The classic regular-hole pattern stops leaves and larger debris while preserving high water flow. For pine needles or shingle grit, consider a small-hole or micro-mesh option.

Q: How do I install them for a low-profile look?
A: Slide the rear edge under the shingle/drip edge, then fasten the front to the gutter lip or fascia with exterior-rated screws or rivets. Ensure gutters are clean and properly pitched first.

Q: What maintenance is required after installation?
A: Inspect seasonally. Brush or blow off surface debris, confirm downspouts/elbows are clear, and recheck fasteners and panel seating after major storms.