If you’re looking for a standout stabilizer that will fit in a smaller space (and a smaller budget), you’ll find it in our aluminum Standout Brackets. Weighing in at only 1.5 lbs. (12.3 ounces per bracket), these sturdy aluminum brackets can be attached to most extension ladders with open rungs having an inside diameter of 1 inch or greater. To attach, simply compress the two bracket ends and slip them into the rung openings. They are held securely in place by the tension and the angle of the bracket. To detach them, just compress and pull.
Once installed, our Standout Brackets will protect gutters, windows and siding, spanning 12 inches beyond each side of your ladder, and providing a standoff distance of 12 inches. Our standouts will provide exceptional stability for the top of the ladder, minimizing lateral movement or rocking.
The cushioned rubber foam that covers the elbow provides a smooth, gripping surface that not only offers superior surface protection, but fights against side slippage as well.
Ladder Compatibility: Fits most aluminum and fiberglass, extension ladders with open D or O rung holes on outside or ladder rail. Hole must be a minimum of 1" in diameter.
Installation Method: Attaches to rails without fasteners. To attach, press 2 brackets end in, toward each other, slide end into rung holes and release.
Meets all ANSI and OSHA requirements for ladder up to Type 1, 250 pound duty rating.
Bracket material – 6061-T6 aluminum tube, 31/32″ outside diameter.
Bracket weight – Each bracket weighs 12.3 ounces
Dims - 21" x 14" x 2"