U.S. Aluminum 6HGNC 6" Supreme Gutter Hanger no Clip, 100/ctn

Engineered for big-run stability, the U.S. Aluminum 6HGNC “Supreme” hanger supports 6" K-style gutters with heavy-gauge aluminum and a low-profile, no-clip design that tucks cleanly under the hem. A broad mounting face and installer-friendly hole pattern speed layout and fastening, while corrosion-resistant construction stands up to weather and washdowns. Packed 100 per carton to keep crews moving.

Features

• Supreme-duty build: Heavy-gauge aluminum resists flex and sag on long 6" runs.
• No-clip, low profile: Clean look that hides under the hem and won’t telegraph through fascia lines.
• Fast installs: Broad fastening surface with a practical hole pattern for quick screw placement.
• 6" K-style fit: Sized for standard 6" aluminum/steel systems and common miters/outlets.
• Corrosion resistant: Aluminum substrate won’t rust; ideal for wet and coastal climates (use compatible screws).
• Code-friendly spacing: Works with typical ~24" O.C. layouts; tighten to ~18" O.C. in snow/wind zones.
• Crew-ready pack: 100/ctn contractor quantity for continuous production.
• Versatile use: New installs or repairs; pairs well with U.S. Aluminum speed screws and accessories.

• Brand/Model: U.S. Aluminum 6HGNC
• Product Type: 6" K-style hidden gutter hanger (no clip)
• Material: Heavy-gauge aluminum alloy, corrosion-resistant (mill finish)
• Dimensions (Each): ~4.5–5.0" L × ~1.2–1.3" W × ~0.06" T (approx.; vendor/batch dependent)
• Weight (Each): ~0.16–0.22 lb (approx.)
• Weight (Carton, 100/ctn): ~16–22 lb (approx.)
• Compatibility: Standard 6" K-style aluminum or steel gutters (typical hems/outlets/miters)
• Fasteners: Accepts common gutter screws #10–#12, 1-1/2"–3"; pre-punched pattern typical (verify on receipt)
• Installation Spacing: ~24" O.C. typical; tighten to ~18" O.C. in snow/wind/high-load zones (follow local code & manufacturer guidance)
• Profile: Low-profile, “no-clip” design that tucks under the gutter hem for a clean look
• Load/Use: Residential & light-commercial long runs; suitable for new installs or repairs
• Operating Environment: Exterior, all-weather; non-rusting substrate
• Finish Options: Mill aluminum; field/factory paintable to match gutter system
• Carton Quantity: 100 hangers per carton
• Recommended Accessories: U.S. Aluminum Speed Screws (6Q1 / 6QNC1) or equivalent corrosion-resistant fasteners
• Standards/Notes: Contractor-grade hardware; confirm local code compliance and spacing for your region

Q: Will these hangers fit all 6" K-style gutters?
A: Yes. They’re sized for standard 6" K-style aluminum or steel systems; verify hem profile on specialty gutters.

Q: What spacing should I use between hangers on long runs?
A: Typical spacing is ~24" on center. In snow/wind/high-load zones, tighten to ~18" O.C. or follow local code/manufacturer guidance.

Q: Which screws should I use for best hold?
A: Use corrosion-resistant #10–#12 gutter screws (1-1/2" to 3"). Pairing with U.S. Aluminum Speed Screws (6Q1/6QNC1) is common.

Q: Is the “no-clip” design as strong as clip-style hangers?
A: Yes. The heavy-gauge aluminum and broad fastening surface deliver strong support; the no-clip profile simply tucks under the hem for a cleaner look.