Roof Top Blox – ROL-06 Large Pipe Roller, 4–6 Aluminum

The ROL-06 Roof Top Blox large pipe roller is a rugged aluminum accessory that supports 4″ to 6″ diameter piping on flat roofs. Designed with an integrated strut and mounting hardware, this roller minimizes wear from thermal expansion and contraction. It can be mounted directly on RTB-01 or elevated using ROD-03 threaded rods for adaptable piping support assemblies.

Key Features:

• Durable aluminum roller for 4″–6″ pipe diameter
• Integrated strut with included mounting hardware (screws and washers)
• Reduces wear from thermal expansion and contraction
• Can be mounted directly on RTB-01 or elevated via ROD-03 rods
• Stable, long-term support across extended runs of piping

• Model: ROL-06

• Type: Large aluminum pipe roller with integrated strut

• Supported Pipe Diameter: 4″ to 6″

• Mounting Hardware Included: Screws (#14 × 1″) and washers for mounting (hardware included)

• Maximum Assembly Height: Does not exceed 14″ overall

• Compatibility: Mounts on RTB-01; elevation via ROD-03 supported; not compatible with XTB-02

• Recommended Use: Ideal for long piping runs to manage thermal movement

• Align the ROL-06 roller centrally on the RTB-01 block.
• Secure using the provided #14 × 1″ sheet metal screws and washers.
• If elevation is needed, install ROD-03 rods into RTB-01 first, then mount ROL-06 atop.
• Ensure the roller rotates freely to accommodate thermal movement.
• Torque any hex bolts on the roller brackets correctly and apply Loctite on jamb nuts if used.
• Confirm the assembly height is within 14″ and verify stability before routing piping.

Q: What pipe sizes does the ROL-06 support?
A: It supports pipes with diameters between 4″ and 6″.

Q: Does mounting hardware come with the ROL-06?
A: Yes—mounting screws (#14 × 1″) and washers are included.

Q: Can this roller be elevated off the roof membrane?
A: Yes, it can be elevated using ROD-03 extension rods.

Q: Is ROL-06 compatible with XTB-02 height extenders?
A: No—it is not compatible with XTB-02 applications.

Q: What is the maximum assembly height when using ROL-06?
A: The assembly must not exceed a total height of 14″.