Steel Seam Rollers

The MR02150 pairs a polished, radius-edge steel wheel with a sturdy offset frame to deliver firm, even pressure without leaving sharp track lines. The rounded profile helps the roller glide cleanly over laps, step-downs, and transitions, while enclosed bearings keep the action smooth for consistent seam consolidation on TPO, PVC, and EPDM systems.Key Features 2″ diameter × 2″ wide polished steel radius roller minimizes edge/track marks on membranes High, uniform compression ideal for long...

Built for broad, even compression on long runs, the MR02090 pairs a 4″ wide polished steel wheel with a rugged frame and smooth, enclosed bearings. It tracks cleanly across laps, step-downs, and terminations, giving you the firm feedback of steel without chatter. A comfortable 5″ handle provides control and knuckle clearance near edges and walls, making this a go-to roller for TPO, PVC, and EPDM work. Key Features 4″ wide polished steel roller delivers strong, uniform pressure for faster...

Purpose-built for tight detail work, the MR13500 uses a lightweight, corrosion-resistant aluminum V-profile wheel that nests into inside corners, ribs, and channels where flat rollers can’t reach. The V shape focuses pressure right in the angle for crisp, uniform consolidation on single-ply membranes, while a rigid frame and smooth bearings keep tracking precise and chatter-free. Comfortable in hand and tough enough for daily use, it’s a go-to finisher for corners, step-downs, and...

Built for smooth finishing with a wider contact line, the MR08580 uses a 1/4″ rounded (convex) steel wheel to deliver even pressure without imprinting sharp track lines. The curved edge lets you blend seams, patches, and step-downs cleanly, while a rigid frame and enclosed bearings keep the roll precise and chatter-free on TPO, PVC, and EPDM. Key Features 1/4″ rounded/convex steel wheel spreads pressure for faster blending and fewer visible edge marks Ideal for dressing long seams,...

The MR02140 delivers firm, even pressure for strong seam consolidation on single-ply membranes and flashing. Its 2″ diameter × 2″ wide polished steel wheel tracks cleanly along laps and transitions, while the offset frame and smooth, enclosed bearings help you apply consistent compression without chatter. Built for daily jobsite use, it’s a dependable choice when you want the feel and feedback of a solid steel roller. Key Features 2″ diameter × 2″ wide polished steel roller provides...

Engineered for stability and smooth tracking, the MR02040 pairs a 2″ × 2″ polished, radius-edge steel wheel with a rigid double-fork frame. The radius profile helps the roller glide over laps, step-downs, and transitions without leaving sharp track lines, while the twin-fork design keeps the axle square under pressure for consistent, even compression. With enclosed bearings and a comfortable 5″ handle, it delivers reliable, repeatable results on TPO, PVC, and EPDM seams—day after day. Key...

Built for stability and high, even pressure on long runs, the MR02100 pairs a wide 2″ × 4″ polished steel wheel with a rigid double-fork frame. The twin-fork support keeps the axle square under load so the roller tracks straight across seams, step-downs, and terminations. Enclosed bearings deliver a smooth, chatter-free feel, while the comfortable 5″ handle gives you confident control on verticals and edges. It’s a jobsite-ready workhorse for TPO, PVC, and EPDM applications where the firm...

The MR02240 delivers concentrated, even pressure for stronger seam consolidation on single-ply membranes and flashing. Its compact 1-1/2″ diameter × 2″ wide polished steel wheel tracks straight along laps and detail areas, while the offset frame and smooth bearings help you roll long runs with control—and without chatter. Built for daily jobsite use, it’s a dependable choice when you want the feel and feedback of a solid steel roller. Key Features 1-1/2″ diameter × 2″ wide polished steel...

Built to finish tight corners and change-of-plane details fast, the MR13115 puts two aluminum V-profile rollers on a single tool so you can switch tasks without swapping tools. The V shape nests neatly into inside angles, ribs, and step-downs, focusing pressure exactly where a flat wheel can’t reach. Lightweight, corrosion-resistant aluminum keeps fatigue low and heat transfer stable during hot-air weld finishing, while the rigid frame and smooth bearings deliver precise, chatter-free...

Designed for precise seam finishing with a touch more coverage than ultra-thin detail rollers, the MR08530 uses a 1/8″ rounded (convex) steel wheel to deliver controlled, even pressure without leaving harsh track lines. The curved edge lets you run right up to laps, transitions, and change-of-plane details, while the rigid frame and smooth bearings keep your passes steady and chatter-free on TPO, PVC, and EPDM.Key Features 1/8″ rounded/convex steel wheel for clean consolidation with minimized...

Built for precision in tight corners and change-of-plane details, the MR13110 uses a solid brass V-profile wheel to deliver firm, even pressure exactly where flat rollers can’t reach. The V shape nests into inside angles, ribs, and step-downs to help you consolidate seams cleanly without scuffing adjacent surfaces. Paired with a rigid frame, smooth bearings, and a comfortable handle, it’s a go-to finisher for detail flashing on TPO, PVC, and EPDM. Key Features Brass V-profile roller focuses...

Built for ultra-precise finishing, the MR08500 uses a super-narrow, 1/16″ rounded-edge wheel that reaches where standard rollers can’t. The curved edge helps you ride right up to a seam or change-of-plane without leaving hard track lines, while the slim profile concentrates pressure exactly where you need it. Smooth bearings and a rigid frame give you controlled, chatter-free passes on detail flashing for TPO, PVC, and EPDM. Key Features 1/16″ rounded-edge wheel focuses pressure into tight...

Everhard MR02153 Wrist-Saver Steel Radius Seam Roller — 2" x 2" The MR02153 combines Everhard’s Wrist-Saver offset geometry with a 2" x 2" polished steel radius roller to deliver high, even pressure without edge marking. The radius profile helps the roller glide over laps, transitions, and step-downs while the offset frame improves line-of-sight and keeps your wrist in a more neutral position. Enclosed bearings and a cushioned handle give you smooth, controlled tracking for long runs and...

Built for high-pressure seam consolidation with less fatigue, the MR02143 pairs a compact 2" x 2" solid steel roller with Everhard’s Wrist-Saver geometry to keep your wrist in a more neutral, comfortable position. The polished steel wheel, smooth bearings, and offset frame help you track long runs and tight details with steady, even pressure—ideal for demanding single-ply work on TPO, PVC, and EPDM. Key Features Wrist-Saver offset design improves line-of-sight, knuckle clearance, and control...

A compact, heavy-duty roller built for precise pressure where it matters most. The MR02200’s small 1" x 1" steel head delivers concentrated force along seams, terminations, and tight detail areas, helping ensure strong, uniform adhesion on demanding roofing work. Smooth rolling action and a comfortable, jobsite-ready handle make it easy to track straight lines without chatter. Features 1" diameter x 1" wide solid steel roller for high, focused compression in tight spaces Smooth, consistent...

The MR02110 Everhard Steel Seam Roller is one of the most popular hand tools among roofers for Membrane and Metal Roofing. EVERHARD steel seam roller, 2'' dia. x 6'' wide is in stock and available as a standard model with 5'' wood handle, enclosed bearings for smooth rolling action, and double forks. This roller makes work easy and faster for the roofers and the MR02110 Steel Seam Roller is one of the most popular rollers in the roofing industry. Made with polished steel, this roller is built...