Malco Rollers and Benders

The Malco ER3 3-Station Edge Roller is a multi-stage forming tool designed to roll and condition sheet metal edges in roofing, HVAC, and fabrication work. It features three integrated roller stations that progressively form, smooth, and finish edges, allowing controlled shaping without cutting or damaging the material. Key Features 3-stage rolling system for progressive edge forming and finishingDesigned to roll, smooth, and condition sheet metal edgesRollers help maintain consistent edge...

The Malco FSXS Power-Assisted Metal Seamer is a drill-driven standing seam roofing tool designed to mechanically lock 1" and 1.5" standing seam panels in a single continuous pass. Built for professional roofing applications, it eliminates the need for manual hand seamers by using a powered drive system to form consistent, uniform seams across long panel runs. Key Features Power-assisted operation driven by a cordless drill (no cords required)Seams 1" and 1.5" standing seam panels (single or...

The Malco Modular Metal Benders are portable, adjustable forming tools designed to create precise bends in sheet metal roofing, flashing, and trim directly on the jobsite. Their modular design allows users to configure single- or dual-station setups, enabling flexibility for both short, detailed bends and longer continuous runs. These tools can form bends on straight or curved panels of virtually any length without the need for a full-size brake. Key FeaturesModular design allows use as...

The Malco FSXC Power-Assisted Metal Cutter is a drill-driven tool designed for fast, controlled removal of mechanically locked standing seam roofing panels. It cuts along the vertical leg of the seam—below the lock and through clips—allowing panels to be separated efficiently during tear-off, repair, or retrofit work. Key Features Drill-powered operation (cordless compatible) for mobility and speedCuts 1" and 1.5" single or double lock standing seamsDesigned to cut below the mechanical lock...

Save time on the job with Malco’s professional-grade 2-Station Metal Roofing Benders, which form 0°-100° bends on straight panels of any length on the jobsite, without waiting on wholesale roll formers. Why pick a 2-station model? Many trade pros prefer them over field brakes, as they can make infinite-length bends! Metal Roofing Benders by Malco are designed for 3/16″ 5 7/8″ (5mm-150mm)-deep bends on roofing panel gable ends, flashing, custom roofing details, and standing seam panels where...

The Malco FSC1 Bender Connector is an accessory designed to link two single-station Malco Modular Metal Benders together, creating a dual-station setup for improved stability and consistency during bending. It allows users to customize their setup based on the job, whether working on shorter detail bends or longer, continuous runs. Key Features Connects two single-station modular benders into one systemEnables dual-station configuration for improved consistency on longer bendsCompatible with...

The Malco FSLR Large Radius Accessory is a replacement roller designed for use with Malco Modular Metal Benders to produce smoother, larger-radius bends. By replacing the standard angled roller, it increases the bend radius to approximately 2 mm, allowing for softer forming—especially on materials like aluminum, copper, zinc, and painted finishes. Key Features 2 mm large-radius roller for smoother, less aggressive bendsReplaces standard ~0.7 mm roller for softer forming resultsIdeal for...

When you need to get the job done right and on time, you need professional-grade Metal Disc Benders by Malco, featuring removable discs for quick disassembly and mid-panel tool removal. Why choose a 1-station model? These tools are best for short bends and curves! Form 90°-180° bends to create hems and other details in any panel length on the jobsite, without waiting on wholesale roll formers. Metal Disc Benders by Malco are designed to form bends in a wide variety of materials for finishing...

The Malco FSH2 Handle for Modular Metal Benders is a clamp-on accessory designed to improve leverage, control, and handling when forming sheet metal. It attaches directly to Malco modular benders, giving users a second grip point for better pressure control and more consistent bending—especially on longer or more demanding runs. Key Features Clamp-on design for quick attachment to modular bendersProvides additional leverage for easier formingAdds a second hand position for improved...

Professional-grade Metal Disc Benders by Malco are built tough to bend metal roofing panels right on the jobsite, and feature removable discs for quick disassembly and mid-panel tool removal. Why choose a 2-station model? Trust us, if you need to do continuous hems over 10′ long, you’re going to want a 2-station tool: the second station allows you to apply pressure to more of the panel while the additional width aids in tracking straight. Form 90°-180° bends to create hems and other details in...

Professional-grade Metal Disc Benders by Malco are built tough to bend metal roofing panels right on the jobsite, and feature removable discs for quick disassembly and mid-panel tool removal. Why choose a 2-station model? Trust us, if you need to do continuous hems over 10′ long, you’re going to want a 2-station tool: the second station allows you to apply pressure to more of the panel while the additional width aids in tracking straight. Form 90°-180° bends to create hems and other details in...

Save time on the job with Malco’s professional-grade 2-Station Metal Roofing Benders, which form 0°-100° bends on straight panels of any length on the jobsite, without waiting on wholesale roll formers. Why pick a 2-station model? Many trade pros prefer them over field brakes, as they can make infinite-length bends! Metal Roofing Benders by Malco are designed for 3/16″ – 13 3/4″ (5mm-350mm)-deep bends on roofing panel gable ends, flashing, custom roofing details, and standing seam panels where...