Everhard MR05011 - Rubber Roller

The MR05011 is a solid, medium-firm rubber roller with offset support—perfect for pressing seams in roofing, rubber mats, and industrial materials. While not as commonly stocked by resellers as other rollers, similar Everhard tools like ergonomic silicone rollers and dual-head options are readily available and may serve as effective alternatives depending on your project's needs.

• Durometer matters: Rubber rollers (60–65) are more rigid than silicone (~50–60), giving better pressure for tougher substrates.
• Fork style: Offset forks are ideal for edge visibility; double forks give stability across wider applications.
• Handle preference: Soft-grip plastic vs wood—choose based on comfort and fatigue for prolonged use.

• Roller Material & Hardness:
  • Made of rubber (60 durometer), ideal for rolling seams without damaging surface materials. 
• Roller Size:
  • Diameter: 2″ (50.8 mm)
  • Width: 2″ (50.8 mm) — slightly narrower than the MR05010 model. 
• Fork & Handle:
  • Offset double-fork frame design keeps the bolt and fork clear of the contact area.
  • 5″ soft-grip plastic handle, providing comfort and clear knuckle clearance. 
• Weight:
  • Approximately 1.63 lb (0.741 kg) — robust and well-balanced for controlled rolling. 
• Made in the USA:
  • Built to professional durability standards typical of Everhard tools.

• Grip the soft-grip plastic handle firmly so you have control of the roller.
• Position the rubber roller onto the membrane seam or surface area you wish to press.
• Roll forward steadily with even pressure to press seams or bond materials.
• If relocating or reversing, roll backward in the same controlled manner.
• Monitor pressure to avoid over-pressing or damaging the membrane.
• After use, wipe off any adhesive, debris, or residue from the roller surface.
• Store the roller in a clean, dry place to protect the rubber and handle integrity.

Q: What is the MR05011 Rubber Roller used for?
A: It’s designed for non-marring pressure on seams and details—ideal for single-ply roofing membranes, flashing work, and other surfaces where a steel roller could damage the finish.

Q: What are the roller’s size and hardness?
A: The roller is rubber at 60 durometer for controlled pressure without scuffing, and measures 2″ diameter × 2″ width.

Q: How does the design improve comfort and control?
A: An offset double-fork frame keeps hardware clear of the contact area for precise tracking, while the 5″ soft-grip plastic handle provides comfort and knuckle clearance.

Q: How heavy is it and where is it made?
A: It weighs about 1.63 lb (0.741 kg) for a balanced feel, and it’s Made in the USA to professional durability standards.