Everhard Cutting Tools

Purpose-built for fast, clean cuts in common insulation materials, the MK46000 pairs a sharp, rigid blade with a comfortable molded handle so you can size batts, trim duct wrap, and score foam board without tearing or crumbling. Lightweight yet tough, it’s the dependable jobsite knife you reach for when you need straight lines, square edges, and tidy cutouts.Key Features Sharp, rigid blade designed to slice fiberglass/mineral wool batts and score/cut rigid foam boards (EPS/XPS/polyiso) with...

DC65990 are lightweight stainless steel bent shears designed for membrane and metal roofing work. They measure 10" in total length, with a cutting edge of 4¾″ . Key Features Durable yet light stainless‑steel build Offset (bent) blades for smoother flush cuts and better visibility Ideal for detail trimming and precision cuts on roofing membranesHot Drop Forged : Steel is heated and drop hammered into the forged shape.Hardened and Tempered : High quality, cutlery grade steel requires precision...

Experience the power of precision with Everhard’s MK46300 Blade. Designed specifically for the demands of modern roofing, this insulation knife effortlessly cuts through thicker IsoBoard and other insulation materials. The blade is crafted from hardened and tempered high carbon spring steel. This provides a long-lasting edge that offers the perfect balance of rigidity and flexibility. Double-beveled on all three edges, the precision ground blade ensures consistent edge quality for a clean and...

The MM21100 is a hand-held membrane slitter specifically designed for cutting TPO and PVC roofing membranes quickly and precisely. It’s ideal for clean straight cuts and fast thermoplastic trimming on the job site.Key Features For TPO and PVC MembranesSimple operation: Bottom guide slides under membrane and forces membrane into cutting blade.Uses three-hole slitter blades: Blade safely mounted in secure housing. Easy to replace and rotate blade. Replacement blades available, item #...

Built for clean cuts through sticky materials, the DC65915 pairs Everhard’s SuperNonStick blade finish with a bent (offset) design for visibility and control. The coating helps shed adhesives, tape, and membrane residue, while hardened, precision-ground blades deliver a smooth, accurate cut across roofing membranes, flashing, peel-and-stick underlayments, and jobsite tapes. Key Features SuperNonStick blade finish reduces drag and buildup from adhesives, tapes, and sealants 10" overall length...

Built to protect your go-to hand tools and keep them close at hand, the DM90100 is a rugged, jobsite-ready sheath for everyday roofing work. The durable, weather-resistant body shields edges and tips from damage (and pockets from accidental nicks), while the secure belt carry and reinforced construction stand up to daily climbs, kneels, and crawl-throughs. Use it to stage cutters, seam testers, small slitters, or other compact tools so you can move faster and work safer on the roof. Key...

Built for fast, clean cuts on single-ply roofing, Everhard’s MM21105 replacement blades keep your membrane slitter performing at its best. The industry-standard three-hole design drops into the MM21100 Slitter in seconds, and each blade can be rotated to extend service life—perfect for TPO and PVC trimming on the job.Key Features Purpose-built compatibility: Direct replacements for the Everhard® MM21100 Roofing Membrane Slitter. Industry-standard format: Three-hole slitter blades for quick...

Designed to make membrane cutting more ergonomic and efficient, the MM21110 allows you to cut both straight and curved lines while standing—no kneeling required.Key Features Best for installers handling large membrane rolls where kneeling is physically demanding. Ideal during long days of cutting TPO or PVC seams across commercial and industrial roofs. Excellent when pursuing professional finish lines—particularly for curved or scribed seams.Work while standing – At approximately 32″ tall with...

The Everhard Utility Knife and Seam Tester is a combination tool that has a folding utility knife on one end and a folding seam tester on the other end. It has a comfortable, black, anodized aluminum handle that allows for easy use for anyone. The knife and seam on this roofing tool has a probe that locks into place when completely open, and when folded can be safely kept in a pocket, attached to a belt using the pocket clip, or carried in the belt sheath that comes with the tool. Key Features...

Keep your duct and insulation knife protected—and always within reach. The DM90070 is a slim, jobsite-ready sheath built to ride comfortably on your belt while shielding the blade (and your gear) between cuts. Tough fabric, reinforced stitching, and a low-profile design make it a dependable holster for daily HVAC and insulation work. Key Features Slim, belt-hang design keeps your knife accessible without bulk; sits flat against tool belts or pants. Reinforced construction with rugged,...

*Left Handed Model Purpose-built for southpaws, the DC65925 combines Everhard’s low-drag SuperNonStick blade finish with a true left-handed, bent (offset) geometry. The mirror-ground blade orientation and offset handle give left-hand users a natural cutting stroke, better line-of-sight, and safer hand clearance over the work. Hardened, precision-ground carbon-steel blades stay sharp through roofing membranes, flashing, peel-and-stick underlayments, and jobsite tapes—while the release coating...

A robust sheath designed for snips and shears, the MM20200 keeps your tools secure and your belt organized on the job site. Universal fit: Spacious enough to hold a wide range of snips and shears — especially models like Everhard’s KDC9 or similar trimmers. Long-lasting protection: Uprated nylon material and rivet construction ensure resilience in outdoor and rough environments. Convenient & secure carry: Belt-ready design allows for easy, accessible tool storage at your hip. Key Features...

Tough, balanced, and purpose-built for HVAC work, the Klenk Dual Duct Knife pairs a thick, stainless blade with a classic rosewood handle so you can sweep through duct board, flex-duct, and insulation with control. One edge is serrated for aggressive cuts; the other is smooth for scoring and finishing—so you get fast starts and clean lines without swapping tools. A slim, reinforced ripstop sheath rides on your belt for easy access between cuts. Key Features Dual-edge 3 mm stainless blade —...

The Everhard® DC65830 Heavy Duty Shear Bent Trimmer is engineered for professionals who demand strength, reach, and precision. With a rugged forged-steel build and extended 12″ length, this trimmer is ideal for cutting sheet metal, roofing materials, and light-gauge metals in tough job site conditions. The bent design provides better control in confined areas while keeping your hands clear of the cutting surface.Key Features 12″ Overall Length – extra reach for larger trimming jobs and...

Maintain the sharpness of your blades with Everhard's Shear and Knife Sharpener. Engineered with high-quality tungsten inserts, this sharpener hones both sides of your blade at once, ensuring a precise edge every time. The ergonomic design includes a built-in guard, offering essential protection for your hands and fingers during sharpening. Compact and lightweight, this tool is perfect for easy storage and portability, making it an ideal addition to any toolkit. Keep your knives and shears in...

The Everhard® DC65820 Shear Bent Trimmer is built for precision, strength, and long-term durability. Designed for sheet metal and roofing professionals, this bent trimmer offers controlled cutting performance, especially in tight spaces and angled applications. Its ergonomic design and commercial-grade construction make it a trusted choice for demanding job sites.Key Features 10″ Overall Length – provides the right balance of reach and control for trimming tasks. Bent Design – angled blades...

The Everhard® DC66006 Shear Bent Trimmer is a professional-grade cutting tool built for roofing, sheet metal, and construction work. With its forged steel construction and bent blade design, this 10″ trimmer delivers clean, precise cuts while offering improved control and comfort. Whether you’re trimming flashing, light-gauge metals, or roofing materials, the DC66006 is designed for long-lasting durability on tough job sites.Key Features 10″ Overall Length – balanced size for reach and precise...