ACRO - Roof Bracket Back 45°, 2" x 10" Plank, 29451

The ACRO 29451 Roof Bracket is a contractor-grade, 19-inch heavy-duty support bracket set at a 45° angle, designed for use with solid 2×10 planks to create safe staging on pitched roofs. It features four offset nail slots—compliant with OSHA safety standards—six long welds for structural strength, a back-stiffening rib to resist twisting and flexing, and a welded gusset on the back panel for added durability. Finished with rounded edges and corners to prevent hand injuries or damage to work surfaces, and coated in powder for corrosion resistance. The full-width back keeps planks squared away from the roof, optimizing performance with minimal footprint and easy repositioning without damaging shingles.

Key Features:
• Four offset nail slots prevent upward sliding and meet OSHA standards
• Six long welds and back-stiffening rib for superior structural rigidity
• Welded gusset on back panel adds durability under load
• Smooth, rounded edges and corners protect hands and roof surfaces
• Full 19" back keeps plank aligned and reduces interaction with roofing surface

• Part number: 29451 – 19" Roof Bracket at 45° angle
• Plank size: Designed for use with nominal 2×10 lumber
• Nail slots: Four OSHA-compliant offset slots
• Construction: Full plate steel with back-stiffening rib and welded gusset
• Finish: Powder-coated for visibility and corrosion resistance
• Load capacity: One worker plus up to 40 lb of materials per 4 ft of staging
• Safety note: Place brackets no more than 8 ft apart; do not overload

• Position the bracket on the roof surface at desired elevation, ensuring solid structural support directly below.
• Secure the bracket using four nails placed into the offset slots.
• Ensure bracket is level and that plank is aligned square to the roof surface.
• Place a structurally sound 2×10 plank into bracket heel.
• Repeat placement for additional brackets at proper intervals (max 8 ft), then lay planks across brackets to form staging.
• Before use, verify all brackets and planks are stable and securely fastened.

Q: What type of plank should be used with this bracket?
A: Use a standard 2×10 lumber plank—fully supported by this 19" bracket design.

Q: How many nail slots does this bracket include?
A: It features four offset nail slots, exceeding OSHA’s requirement of three.

Q: Is the bracket easy on roofing materials?
A: Yes—its smooth, rounded edges and full-back design reduce damage risks to shingles.

Q: What’s the recommended spacing between brackets?
A: Maximum of 8 ft between brackets or planks for safe staging according to OSHA standards.

Q: How durable is the bracket?
A: Extremely durable, with welded gusset, stiffening rib, six long welds, and powder-coated steel construction.