WUKO Tools

WUKO’s 1250 Rotary Sheet Metal Shear features an in-feed support plate made of stainless steel. The Shear comes with an adjustable stop, helps leave a perfect cut every time. Two carrying handles makes it easy to transport to & from the job site. Options:Slides Right to Left - 1005321Slides Left to Right - 1016807Features Max. sheet metal thickness: Galvanized steel: 0.8 mm/0.031″Aluminium, copper, zinc: 1.0 mm/0.039″Stainless steel: 0.6 mm/0.024"Perfect cut every timeVery low weightWeight: 35...

WUKO Bender Set 3352/4000 This couple enable quick, easy and clean bending/forming of long, straight sheet metal strips. Start off with 0-90 degree and continue to 180 degree. Set Includes: Duo Bender 3352 Disc-O-Bender 4000 Carrying Case Features: WUKO Duo Bender 3352 for bending to 90 degree: Your go-to Bender for straight panels, the uber long shafts allow you a bonding height of up to 14" WUKO Disc-O-Bender 4040 Twist, Start at 90 degree and bends up to 180 degree: No free space required...

WUKO Bender Set 7350/4000Kit to bend sheet metal up to 100° and make hems The Wuko Uber Bender Duo 7350 is a longer version of the Wuko 7200. It features two bending angled wheels, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. Unlike the 6350, this bender features two sets of rollers and a handle, making it ideal for longer straight lines.The Wuko Bender 4000 is an...

Features: Comfortable Wood Handle 2" Head Diameter Hard Plastic Soft-face Ends Easily interchangeable nylon heads Gentle on the joints and low in noise Very wear-resistant No chipping Made for very high impact Very secure shaft-head connection thanks to aluminum wedge and locking pin Double curly hickory handle

Roof panel machine for making the profile for single and double-lock standing seams (seam height 25 mm/1″) Model 0420 Machine frame made of modular aluminum profile systemUpper machine cover: Swing doors, easy to open, with safety switch, frame elements made of transparent, impact‐resistant polycarbonate⇒ clear view during profiling process⇒ easy access for adjustment and serviceMobile, two fixed and two swivel castors with brakes230 V motor with frequency converter for continuously...

WUKO 5000 Combo Bender Roller Pairs Roll sets made of stainless steel and equipped with long-life bearings Interchangeable roll sets (customized rolls on demand) Roller Sets Available: Pair of Offsetting 45 Degree, 1/8" - 1005552Pair of Offsetting 45 Degree, 5/32" - 1005560Pair of Offsetting 90 Degree, 5/32" - 1005578Pair of Rollers for Beading  - 1005586 ...

For cutting equally wide strips (up to 625 mm/24.6') you can fit out the WUKO Clipper with the adjustable guide. Kit includes two (2) additional rods that can be used as extension rods for a width of up to roughly 24 ½ inches. WUKO Adjustable Guide for the Cipper C2A Only

Wuko’s Rotary Sheet Metal Shears are made of high resistance, non-corrosive materials. The Wuko 1010 is a clamping device that uses pressure bolts to fix materials. The cutting wheel featured on this rotary is adjustable & made of high quality, hardened steel. Available in four working widths: 1.00 m/40″ (1005289) - weight 57 kg/126 lbs 1.25 m/50″ (1005297) - weight 63 kg/139 lbs 1.50 m/59″ (1005305) - weight 69 kg/152 lbs 2.00 m/79″ (1005313) - weight 85 kg/187 lbs ...

The WUKO Clipper 1022 is the amazing little slitter that delivers smooth, vibration-free cutting through sheet metal — without curls or distortion. Engineered and manufactured in Austria, this compact yet powerful cutting tool is designed for precision, efficiency, and professional-grade results in both workshop and job site environments. Whether you're cutting straight lines or smooth curves, short sections or long panels, the Clipper 1022 provides clean, controlled performance with variable...

This Wuko bender accessory is very useful if you often make high folds (150-350mm). The clamping handle improves power transmission and handling, the support rail stabilizes and at the same time protects the material to be processed and the shafts of the Wuko Bender from pressure points and abrasion. It can therefore be recommended in general for Duo Benders, but especially for long models such as the 7350. - The Plus Set is intended as an accessory for the Bender Set 7200/4000 or...

The WUKO Bender Set 6200/7200 combines two of WUKO’s most versatile bending tools into one professional-grade solution for precise sheet metal forming. Designed for bending curved and long, straight panels up to 100°, this Austrian-engineered set is ideal for workshop fabrication and on-site metal roofing applications. Perfect for delicate or spring back materials, the angled bending discs reduce surface pressure and help prevent scratches to finished or coated materials. Whether you're...

The WUKO Trimmer 1081 is a self-propelling power tool designed for removing old standing seam panels. It cuts off single-lock and double-lock standing seams, including clips, and can be used on different seam heights. The tool runs forward and backward for cutting in both directions and can also be inserted into the seam from above. Protected cutting wheels support safer operation, and the tool comes in a tough carrying case for transport and storage.Key features: Self-propelling tool for...