Shingle Roofing Tear-Off

'The Work Horse', Devours Anything in its Path Removes: Asphalt, fiberglass, asbestos, slate, cedar and tin 48" Length The Blade: Wide-base hardened steel alloy grasps under more of the materials being removed thus allowing you to salvage reusable materials

Tear through shingles like a pro with the Best Damn Ripper – trusted by roofing crews across North America. This 46" Shingle Popper from Prime Line Tools is built tough to handle the most demanding tear-offs. With its patent-pending design, the angled head easily slides under shingles while the serrated teeth bite and rip with serious power. The heavy-duty D-handle gives you better control, more comfort, and less fatigue on long jobs. Features: Heavy-duty steel construction for maximum...

The Shingle Eater 6126 Original is an American-made roofing tear-off tool designed for asphalt shingle removal. It features a 55-inch handle that provides reach and leverage, along with a 10-inch wide footplate equipped with 10 corrugated steel teeth that help remove shingles and nails efficiently. Weighing 7.4 lbs, the tool is built with durable all-steel construction, a heat-tempered foot plate, and a powder-coated finish for long-term performance. It is designed to deliver reliable results...

The Shingle Stripper's innovative wedge design works great on removing nails and shingles from multi-layered roofs as well as plank roofs.46" LengthHigh qualityLight weight steel handleComfortable plastic D-Grip11 gauge high strength tempered steelRobotic welds for strength & durabilityBoth residential & commercial use

The Tie Down 13827 Steel Shingle Remover is a rugged, long-reach tool designed to efficiently tear off asphalt shingles, cedar shakes, and other roofing underlayments. It features heat-tempered teeth capable of pulling both shingle tabs and embedded nails in a single pass. An ergonomic vinyl grip enhances comfort during extended use, and the 47.5-inch length improves reach on steep roofs. Key Features 47.5 in length for extended reach Heat-tempered teeth for both shingle tabs and nails...

The Shingle Eater 6127 Steep Slope is an American-made roofing tear-off tool designed for use on steeper pitched roofs and for users under six feet tall. It features a 46.5-inch handle and a 10-inch wide footplate equipped with 10 corrugated steel teeth. The tool is finished in OSHA Safety Yellow and built with all-steel construction meant to support asphalt shingle removal. Key features: 46.5-inch handle tailored for steeper pitched roofs and users under six feet tall 10-inch wide footplate...

20" Version of the 48" Shin Dig Removes: Asphalt, Fiberglass, Asbestos, Slate, Cedar and Tin

The Shingle Eater 8126 Renovator Tall Demo Eater is an American-made roofing tear-off and demolition tool designed for heavy duty use. It features a 55″ angled handle for leverage and control, and a 10″ wide footplate with 10 corrugated steel teeth and a 90-degree weld angle for enhanced striking and prying power. Reinforced with gussets and built to manage multiple layers of shingles, rotten decks, or jobsite surprises, this tool is engineered to slide under materials and improve efficiency....

The Tie Down 13825 Steel Shingle Remover is engineered for efficient tear-off of asphalt shingles, cedar shakes, and roofing underlayments. With a 21.5-inch length and heat-tempered teeth, it handles both shingle tabs and embedded nails. The ergonomic design includes a vinyl grip for comfort during extended use. Key Features 21.5-inch steel shingle removal tool Heat-tempered teeth designed to pull both shingle tabs and nails Vinyl grip handle for improved comfort Suitable for tear-off and...

The Cedar Ripper is a manual roofing tear-off tool used for removing cedar shakes and similar roofing materials. Its narrow profile allows the blade to slide between rows of fasteners, lifting shakes and the underlying roofing paper together rather than breaking them apart during removal. This tool is commonly used during cedar shake tear-offs to increase removal efficiency and reduce loose debris on the roof surface. By lifting multiple shakes at once, it helps streamline tear-off work...

The Shingle Eater 6128 Short & Narrow is an American-made roofing tear-off tool engineered for tight or steep areas such as small garages, between peaks, or near gutters. It features a 36.5-inch handle and a 7-inch wide footplate with 7 corrugated steel teeth to help remove shingles and nails in confined spaces. Built with 100% all-steel construction and finished in OSHA Safety Yellow, it offers durability and maneuverability for specialty roofing tear-off scenarios. Key features: 36.5-inch...

The Shingle Eater 6130D Steep Slope D-Handle is an American-made shingle removal tool designed for steeper pitched roofs. It features a 46.5-inch length and a steel D-handle grip built to give better leverage, combined with a 10-inch wide footplate equipped with 10 corrugated steel teeth for effective shingle and nail removal. The tool is built with rugged all-steel construction, designed to slide easily under shingles and deliver accurate tear-off performance. Key features: 46.5-inch handle...

The Shingle Eater 8130D Demo Eater D-Handle is an American-made shingle removal tool designed for renovation and heavy tear-off jobs. It features a wide steel D-shape handle (over 6″ wide) and a 53″-54″ length steel pipe grip for enhanced control and leverage. The footplate comes with 10 corrugated steel teeth and a reinforced fulcrum with a 90° strike angle, built to slide under shingles and deliver higher prying force. Its approximately 8.5 lb weight is balanced to optimize sliding and...

The Razor-Back 46142 roof shovel is designed for removing shingles and features a D-Handle to provide added leverage during useFeatures:Industrial gauge steel blade with turned step for secure foot placementNotch edge steel bladeWelded fulcrum for leverage30in. North American hardwood handle for durability Steel D-Grip encases the wood and prevents twisting42 in. Height x 7 in. Width x 3.125 in. Depth ...

The Mini Stripper has a smaller design to reach tight spots around dormers, overhangs, step flshing and ridge cap removal.24" Height (click "more details" to see further dimensions and weights)High qualityLight weight steel handleComfortable plastic D-Grip11ga high strength tempered steelRobotic welds for strength & durabilityBoth residential & commercial use