Roof Top Blox SCB-07 Securing Brackets (Pair)

The SCB-07 Roof Top Blox securing brackets, made from durable UV-resistant polycarbonate, anchor RTB-01 support blocks securely to the roof surface. Ideal for high-exposure installations, these brackets lock onto the blox tabs and bond to the roof membrane using structural adhesive, preventing displacement from wind, water, or snow.

Key Features:

• Pair of UV-resistant polycarbonate brackets
• Locks onto blox tabs and bonds to roof for secure anchoring
• Uses M-1 (ADH-12) structural adhesive and compatible primer
• Prevents block movement under wind, water, and snow load conditions
• Ideal for high-load and smooth membrane rooftop installations

• Model: SCB-07

• Type: Securing brackets (pair) for RTB-01 blocks

• Material: UV-resistant polycarbonate

• Installation: Locks onto engineered blox tabs, bonded with adhesive, fastened with screws

• Adhesive: M-1 (ADH-12) required; primer (PRI-13) required for TPO membranes

• Fasteners: Two #12 × 3/4″ sheet metal screws per bracket (not always included)

• Compatibility: Works with RTB-01 and suitable for smooth membranes and high-exposure environments

• Packaging: Bulk packed—24 pairs per carton

• Clean and remove loose gravel, oil, and debris from block location.
• Prime surface if membrane is TPO, using PRI-13.
• Apply M-1 (ADH-12) adhesive to the roof under bracket base.
• Lock SCB-07 bracket onto RTB-01 mounting tabs.
• Fasten each bracket using two #12 × 3/4″ sheet metal screws into the blox.
• Allow adhesive to cure as per manufacturer instructions before load application.

Q: What material are the SCB-07 brackets made of?
A: UV-resistant polycarbonate for durability and weather resistance.

Q: Do the brackets require adhesive?
A: Yes. They must be bonded using M-1 (ADH-12) structural adhesive, with PRI-13 primer on TPO membranes.

Q: How are the brackets secured to the blox?
A: They lock onto engineered tabs and are fastened with two #12 × 3/4″ screws per bracket.

Q: When should SCB-07 be used?
A: In high-exposure areas or where wind, water, or snow loads may displace blox unless secured.

Q: How are the brackets packaged?
A: Bulk packed, typically 24 pairs per carton.